The dc_parser_set_data() function allows to re-use a parser object for
multiple dives. The advantages of this feature are actually very limited
in practice. The reduction in memory consumption is almost negligible,
because the amount of internal state in the parser is typically very
small. But the implementation requires some additional complexity
because each backend needs code to reset its internal state. Therefore,
the function is removed and the data and size needs to be passed
directly to the dc_parser_new() and dc_parser_new2() functions instead.
Because keeping a reference to the data has also caused issues in the
past, especially for applications implemented in a garbage collected
language, the data will now also get copied internally.
Only a few dive computer backends (reefnet, aladin and memomouse)
require the clock parameters for parsing the date/time. Therefore,
those parameters are removed from the constructor function and
applications should set the clock parameters with the
dc_parser_set_clock() function instead.
The backend specific calibration function are deprecated. Applications
should use the new replacement functions introduced in commit
6ab140461a3a85fba3803283070427f3be413c79.
Because the sample struct is passed by value, the size of the structure
can't be changed without also changing the function signature and
breaking backwards compatibility. This prevents adding new fields in the
future, to support some new features.
When passing the sample struct by reference using a pointer, the size of
the pointer does always remains the same.
For gas consumption calculations it's very convenient to know whether a
tank is used for example in a sidemount configuration, or as
oxygen/diluent tank on a rebreather.
For rebreather dives, it's convenient to know whether a gas mix is used
as a closed-circuit mix (oxygen/diluent) or as an open circuit mix
(bailout).
Some dive computers report the time of the next decompression stop,
while others report the Time To Surface (TTS). Some models can even
report both.
Add a TTS field to the deco sample to support both values.
Rebreathers typically support multiple ppO2 sensors as a safety measure
in case a sensor fails during the dive. The current api can already
report multiple ppO2 values per sample, but it does not provide any
information about which sensor the measurement is from.
The new sensor index provides this info, and can also be used to
distinguish between the average/voted ppO2 value using the special value
DC_SENSOR_NONE.
After the previous commit changed the resolution of the sample time to
milliseconds, the dive computers which actually support a higher
resoltion can now enable this feature and report all samples.
Some dive computers, especially freediving computers, supports multiple
samples per second. Since our smallest unit of time is one second, we
can't represent this, and the extra samples are dropped. Therefore, the
units are changed to milliseconds to prepare supporting this extra
resolution.
The newer u-Blox Nina B2 bluetooth module supports larger packets up to
244 bytes, but the older Telit/Stollman bluetooth module does not.
Trying to send a packet larger than 20 bytes fails. For maximum
compatibility, limit the output packet size to 20 bytes.
Replace the custom packet handling code in the iconhd and ostc3 backends
with the new layered packet I/O, and also integrate it into the idive
and extreme backends.
The latest versions of the Divesoft Freedom (HW 4.x) and Liberty (HW
2.x) dive computers support BLE communication. Previous generations did
support only a mass storage mode, where the dives are available as DLF
files. The BLE communication protocol uses HDLC framing for the data
packets. The dives downloaded over BLE have the same data format as the
DLF files.
Co-authored-by: Jan Matoušek <jan.matousek@rekomando.cz>
Tested-by: Jakub Hečko <jakub.hecko@divesoft.com>
The Windows version resource is compiled and can include the (generated)
version.h header file for the definition of the version macros. There is
no need to have it generated by autotools. Less generated files makes it
easier to use other build systems, like Visual Studio.
The hwos devices support 5 gas mixes for open-circuit and 5 diluents for
CCR dives. Internally, both sets are stored separately, but depending on
the dive mode only one of both sets gets stored in the dive header. The
gas change event contains the index of the corresponding gas mix or
diluent, and should always be in the range 1 to 5.
The OSTC4 behaves a bit different from the other hwOS models and uses
index 6 to 10 for the diluents. That means the index needs to be
adjusted to refer to the correct mix in the dive header.
Reported-by: Michael Keller <github@ike.ch>
The OSTC stores either the OC gas mixes or the CCR diluents depending on
the dive mode. For CCR dives, there is also bailout to an OC gas
possible, and those gas mixes are added dynamically to the manual gas
mixes.
The Shearwater dive computers store both the configured OC gas mixes and
CCR diluents in the header.
In both cases, the gas change events should reference the correct type
of gas mix. This patch takes care of that.
Keep track of the gas mix type, and whether the gas mix is enabled or
not. Right now this extra information isn't really used for anything
yet, but it's available for future use.
The index in the gas change event should refer to the one of the fixed
gas mixes. All gas mixes with a higher index are either manual or
bailout gas mixes, and are reported with different events containing an
O2 and He percentages instead.
Dives without a valid gas mix in the sample data (e.g. both the O2 and
He set to zero) are currently ignored by accident. Because the
o2_previous and he_previous variables were initialized to zero, those
invalid gas mixes were not processed.
Add an explicit check for such gas mixes to make this more obvious.
For freedives it makes no sense to report any gas mixes. The freedives
also use a different sample format, which doesn't generate any gas
change events.
Especially among technical divers, it's not uncommon to carry spare
tanks that will only be used in emergency situations (for example a
rebreather with one or more bailout tanks). Since those gas mixes are
not used throughout the dive, they were also not reported to the
application.
Fixed by reporting all configured gas mixes. Applications can still
obtain the previous result after manually inspecting the gas switch
events in the samples and filtering out the unused gas mixes.
This partially reverts commit c8b166dadbf961e17a9bd1cc28db3d92832ddf72.
The new Excursion v6 firmware supports some new commands for accessing
the dive index, and also uses a completely new data format. To preserve
backwards compatibility in the download logic to some extent, some
critical fields such as the profile length, remain stored at identical
offsets.
The new data format now contains a version field to allow for future
modifications. This version field is located at byte offset 3, which
corresponds to the highest byte of the 32 bit dive number in the old
format. Thus, unless someone manages to reach 16M dives, this field will
always be zero for the old format.
Co-authored-by: Ryan Gardner <ryebrye@gmail.com>
For the HP CCR mode, the O2 and diluent tank pressure was stored in the
T1 and T2 tank pressure fields. Starting from log version 14 they moved
to dedicated fields in the EXT sample, next to the T3 and T4 tank
pressure. Thus the maximum number of tanks increased from 4 to 6.
The Oceans S1 uses a plaintext and line based communication protocol
over BLE. The larger payloads, which also contain plaintext data, are
transferred using the XMODEM-CRC protocol.
Based-on-code-by: Linus Torvalds <torvalds@linux-foundation.org>
The Deepblu Cosmiq+ uses a plaintext and line based communication
protocol over BLE, where the binary payload data is encoded as
hexadecimal characters.
Based-on-code-by: Linus Torvalds <torvalds@linux-foundation.org>
There are functions for reading 8, 16, 24 and 32-bit big and little
endian values, but the corresponding functions for writing such values
are not always available. The 64-bit variants are also missing.
Moving the implementation of the snprintf wrapper functions to the
platform module allows to re-use the same implementation throughout the
entire codebase.
The Oceanic Pro Plus 4 appears to "disconnect" somehow after about 30
seconds. The BLE connection remains up, but the dive computer simply
stops responding to commands. The download fails with a timeout error,
and the end-user can only download a few dives at most.
The Android DiverLog+ application appears to keep the connection alive
by re-sending the version and handshake commands once in a while. Copy
this behaviour by repeating those two commands every 50 read requests.
During testing, that's approximately every 25 seconds.
Note that both commands are required, sending only one of them does not
fix the problem.
The Oceanic Pro Plus 4 appears to support the big page B4 and B8 read
commands, but with some strange twists:
* When sending the B8 read command, a 256 byte packet is received. The
checksums of the packet are valid, but the upper half of the payload
data is always filled with zero bytes. That means we can't use this
command.
* The B4 read command appears to use a 2 byte checksum instead of the
normal 1 byte checksum. That means we can use this command with a
small model specific tweak.
The model number is now also available in the common struct. There is no
need to store it twice. The auto-detected model number from the version
table is also more reliable than the one passed by the caller.
With the model number in the version table, the version string can be
mapped to the corresponding model number. This allows to implement some
model specific behaviour already before being able to read the model
number.
In most cases, there is a simple one to one relationship between the
version string and the model number, but there are also a few
exceptions:
* For the Sherwood Wisdom 2 and 3, and the Beuchat Mundial 2 and 3,
each variant has a different model number, but the first part of the
version string is identical. The difference is in the firmware
version part. Handling this correctly requires two entries in the
table.
* For the Oceanic OC1 there are 3 different model numbers, and only 2
different version strings. That means there is no correct mapping
possible.
Some iX3M models support a dual mode Buhlmann and VPM decompression
algorithm. Currently libdivecomputer is only capable of reporting one of
those two algorithms, but that's still better than returning an error.
