When the dive mode setting is set to air, the oxygen percentage stored
in the header is different from the expected 21%. It might be the last
used nitrox percentage.
The assumption that two consecutive dive profiles are stored without any
gaps in between them, appears to be incorrect in some cases. Instead of
failing with an error we just skip those gaps now.
We received a report of a Darwin Air device which has a very high error
rate. The majority of the echo packets is incorrect, but since this
doesn't seem to have any effect on the actual data packet, we can just
ignore this error. If there happens to be a more serious error, it will
be detect in the data packet.
Sometimes there were also a some garbage bytes received at startup.
Adding a small delay seems to fix this.
The linux USB CDC-ACM driver, which is used by the Mares Icon HD
interface, doesn't support the ioctl's to configure a custom baudrate.
But since the actual baudrate doesn't seem to matter at all, we revert
back to the nearest standard baudrate.
Because custom baudrates are confirmed to be supported on Windows and
Mac OS X, those platforms can keep using the non-standard baudrate.
When trying to send the commands as fast as possible, without any delay,
the failure rate is very high. Almost every single packet fails with a
timeout at first. Retrying the packet works, but those many timeouts
make the download extremely slow. Adding a small delay avoids the much
more expensive timeout and speeds up the transfer significantly.
The Darwin and Darwin Air share a very similar layout, but with a few
differences here and there. Unfortunately, there seems to be no way to
autodetect the exact model during the download. Therefore, an extra
model parameter is added to select the appropriate model manually.
A side effect is that the mares_darwinair_extract_dives function now
requires a valid device handle. This shouldn't cause any real problems
because this function will likely become private some day.
The init command appears to behave more like a hard reset. If the
command is sent during the communication, the device immediately closes
the connection and no further communication is possible without
disconnecting and reconnecting the device.
Sending the command at the start of the communication seems to require a
long delay before sending the next command. However the communication
works equally well without sending this command. For some devices it
even improves the success rate of the initialization sequence, and thus
there is no reason to keep it.
The packet size for the nemo and puck backends happens to be identical.
But the value for the nemo backend is truly fixed, while the value for
the puck backend can be adjusted. To avoid breaking the nemo backend
when changing the default value, we redefine the packet size explicitly
to the correct value.
The common device structure was used only for sharing the fingerprint
and layout descriptor, but the nemo backend doesn't even store a layout
descriptor, and the fingerprint can equally well be passed around as a
function argument.
Some devices are having problems during the initialization sequence. The
extra delay appears to improve the success rate for the affected
devices. There is obviously a small performance penalty, but being able
to establish a reliable connection with all devices is more important.
We received data from an Icon HD Net Ready with a model code equal to
0xFF, which is an invalid value. Fortunately we can figure out the
correct model code from the data in the version packet.
When linking dynamically, the shared library contains a reference to all
external dependencies, and the linker can easily resolve them. However
when linking statically, all external dependencies have to be specified
explicitly. This rule also applies to dependencies that are not exposed
through the public api.
The pkg-config Requires.private field is used to support both static and
dynamic linking correctly.
We received an interesting case of a dive computer whose battery died
during a dive. Apparantly the device recorded some samples, but failed
to terminate the dive properly. In the linked list, the next pointer of
this dive points to itself, which is obviously an invalid value.
I suspect the device initializes the next pointer to point to itself at
the start of a new dive, and updates it again with the correct value
once the dive has finished. But due to the battery failure, that last
step never happened.
Anyway, since we are traversing the linked list backwards, we don't need
the next pointer, and we can simply skip the incomplete dive. The error
is not returned immediately anymore, but delayed until the end of the
download.
The D9tx, D6i and D4i have twice the amount of memory compared to the
previous versions (64K versus 32K). To support both variants, a new
layout descriptor is introduced.
Correctly skip the 4 byte length in front of the sample data. The
previous code happened to work by accident, because the header after the
sample data was assumed to be 4 bytes larger, and thus those two errors
cancelled each other out.
These new models use a faster baudrate. The correct baudrate is detected
by probing with the version command. To speedup the detection, the model
code can be supplied by the caller as a hint, which is then used to
start the autodetection directly with the correct baudrate.
To maintain backwards compatibility, the model hint is not enabled yet.
The sample configuration data describes which sample data is available
and how it is stored. Using this data should be more reliable than using
a hardcoded configuration.
With the support for custom baudrates on all systems, there is no need
anymore to use the nearest standard baudrate. Using the exact baudrate
should make the communication more reliable on Unix systems.
