The dc_parser_set_data() function allows to re-use a parser object for
multiple dives. The advantages of this feature are actually very limited
in practice. The reduction in memory consumption is almost negligible,
because the amount of internal state in the parser is typically very
small. But the implementation requires some additional complexity
because each backend needs code to reset its internal state. Therefore,
the function is removed and the data and size needs to be passed
directly to the dc_parser_new() and dc_parser_new2() functions instead.
Because keeping a reference to the data has also caused issues in the
past, especially for applications implemented in a garbage collected
language, the data will now also get copied internally.
Only a few dive computer backends (reefnet, aladin and memomouse)
require the clock parameters for parsing the date/time. Therefore,
those parameters are removed from the constructor function and
applications should set the clock parameters with the
dc_parser_set_clock() function instead.
Because the sample struct is passed by value, the size of the structure
can't be changed without also changing the function signature and
breaking backwards compatibility. This prevents adding new fields in the
future, to support some new features.
When passing the sample struct by reference using a pointer, the size of
the pointer does always remains the same.
Some dive computers, especially freediving computers, supports multiple
samples per second. Since our smallest unit of time is one second, we
can't represent this, and the extra samples are dropped. Therefore, the
units are changed to milliseconds to prepare supporting this extra
resolution.
The latest versions of the Divesoft Freedom (HW 4.x) and Liberty (HW
2.x) dive computers support BLE communication. Previous generations did
support only a mass storage mode, where the dives are available as DLF
files. The BLE communication protocol uses HDLC framing for the data
packets. The dives downloaded over BLE have the same data format as the
DLF files.
Co-authored-by: Jan Matoušek <jan.matousek@rekomando.cz>
Tested-by: Jakub Hečko <jakub.hecko@divesoft.com>
The Oceans S1 uses a plaintext and line based communication protocol
over BLE. The larger payloads, which also contain plaintext data, are
transferred using the XMODEM-CRC protocol.
Based-on-code-by: Linus Torvalds <torvalds@linux-foundation.org>
The Deepblu Cosmiq+ uses a plaintext and line based communication
protocol over BLE, where the binary payload data is encoded as
hexadecimal characters.
Based-on-code-by: Linus Torvalds <torvalds@linux-foundation.org>
For dive computers where the reference time (epoch) of the device is
unknown, libdivecomputer uses the current time of the device (devtime)
and the host system (systime) to synchronize both clocks.
Currently, both timestamps are passed directly to the constructor of the
parser. With the new public function, the application can adjust the
timestamps afterwards.
Some dive computers store the depth as an absolute pressure value (in
bar). To convert to a depth value (in meters), the atmospheric pressure
and water density are required. For dive computers that do not have
those values available, libdivecomputer uses a default value. With the
new public api functions, applications can adjust those default values.
Some dive computers already provided a backend specific calibration
function. Those functions are now deprecated. They are kept around to
maintain backwards compatibility for now, but they will be removed in
the next version.
Since the clock synchronization has been removed (see commit
a1962558412b8c89a79656992c8e7f4d001065c2 for the details), those
parameters serve no purpose anymore.
The Sporasub SP2 uses a very simple communication protocol and memory
layout, but with some unusual aspects:
Dives are artifically limited to a maximum of 6000 samples.
Unlike all other dive computers, the dives are not stored in some kind
of ringbuffer structure. Once the memory is full, no new dives can be
recorded. The existing dives need to be erased first, and the dive
computer will start recording again at te start of the memory area. The
Sporasub application has an "Auto-clear watch memory after data
transfer" feature for this purpose.
I didn't implement a more efficient download algorithm because
downloading a full memory dumps takes less than 10 seconds.
In commit 2829f7ebf9902170bf653d67dbe412a0a4f140cf, the hwos parameter
of the hw_ostc_parser_create() function was kept to preserve backwards
compatibility. Since the function has been removed from the public api,
the parameter can be removed now.
The Uwatec Smart, Meridian and G2 backends are almost identical, except
for the low-level packet sending and receiving code. With the new I/O
layer, those three backends can easily be unified in a single backend.
The Meridian and G2 are completely removed, only the family types are
kept for backwards compatibility.
The back-end parser seems to be the same as for the Uwatec Smart (aka
Galileo Sol). At least that's the assumption right now.
The downloader just uses USB HID (very similar to EON Steel) rather than
the horrible IrDA thing.
There's also eventually a BLE thing, but that's for the future.
This is an unholy mixture of the Uwatec Smart downloader logic and the
EON Steel usbhid transfer code. The back-end is pure Uwatec Smart
(model 0x11, same as Galileo Sol).
I'm not at all sure this gets everything right, but it downloads
*something*.
[Jef Driesen: Renamed the backend to uwatec, and made some smaller
cosmetic changes to match the existing coding style.]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The calibration values for the Petrel are typically in the range 1600 to
2400, while for Predator they are much smaller, with values in the range
800 to 1400. The consequence is that the calculated ppO2 values are too
low for the Predator. Adding a constant offset of about 1000 changes the
calibration value to be in approximately the same range as the Petrel,
and hence more reasonable ppO2 values. But this correction should only
be applied for the Predator, and not the Petrel.
Reviewed-by: Anton Lundin <glance@acc.umu.se>
The second variant of the open or create functions were introduced to
maintain backwards compatibility. But after being removed from the
public api, these functions serve no purpose anymore, and can be removed
completely.
The vendor_product_parser_create() and vendor_product_device_open()
functions should be called indirectly, through the generic
dc_device_open() and dc_parser_new() functions. And the
vendor_product_extract_dives() functions are internal functions that
should never have been part of the public api in the first place.
The Cressi Drake is a mainly a freedive computer. The data format is
almost identical to the Leonardo. The main difference is that a single
dive now contains an entire freedive session. Each freedive in the
session is delimited with a 4 byte header containing the surface
interval and a special marker.
To be able to pass the OSTC 3 model number to the parser, and preserve
backwards compatibility, we need a new function. The new function should
also be used for the Frog, by passing zero as the model number.
Using the hw_ostc_parser_create() function with the hwos parameter set
to one, is now deprecated but will remain supported for backwards
compatibility.
For applications supporting offline parsing (like libdivecomputer's own
dctool application), some device specific knowledge is still required in
order to map a particular model to the corresponding backend. The new
convenience function will take care of that internally.
The already existing dc_parser_new() function does the same, but
requires an open device handle, which makes it unsuitable for offline
parsing.
Both the allocation and initialization of the object data structure is
now moved to a single function. The corresponding deallocation function
is intended to free objects that have been allocated, but are not fully
initialized yet. The public cleanup function shouldn't be used in such
case, because it may try to release resources that haven't been
initialized yet.
Instead of freeing the object data structure in the backend specific
cleanup function, the memory is now freed automatically in the base
class function. This reduces the amount of boilerplate code in the
backends. Backends that don't allocate any additional resources, do no
longer require a cleanup function at all.
The protocol of the iX3M series is almost identical to the protocol of
the iDive series. The main difference is that the command bytes and the
size of the response packets have been changed. In order to be able to
communicate with the correct set of commands, the user needs to supply
the correct number now. To maintain backwards compatibility, a new
variant of the open function is added.
Basic Suunto EON Steel downloading copied from my test application.
This parses all the core dive data, including sample data (time, depth,
cylinder pressure, deco information etc).
The deco information returns ceiling and TTS rather than ceiling and
"time at ceiling", because that's what the dive computer has, and I
don't see any other way to return the information.
We don't report any events yet, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Uwatec Meridian protocol is identical to the Uwatec Smart/Galileo
protocol, except for some additional framing around each data packet,
and the switch from IrDA to usb-serial communication. For parsing, the
data format appears to be identical to the Galileo data format.
Although the communication protocol of the OSTC3 is nearly identical to
that of the Frog, the different size parameters make it hard to share
the code easily. On top of that, if we ever implement native bluetooth
communication support, we'll need a completely separate backend anyway.
Therefore the Frog backend is simply duplicated, with a few OSTC3
specific changes applied here and there.
The existing ostc parser is upgraded to support the new OSTC3 data
format.
The React Pro White appears to be a newer variant of the React Pro. For
the communication it uses the newer atom2 protocol, but the data format
remains (almost) the same as the older React Pro.
The Petrel (with updated firmware) supports an enhanced communication
protocol, which is more efficient and powerfull than the legacy Predator
compatibility mode. The new protocol uses data compression for faster
transfers and supports the ability to selectively download individual
dives. Last but not least, the new protocol isn't limited to the last
128kB of logbook data, but can access the full logbook capacity (16MB).
Currently, each backend has it's own function to verify whether the
object vtable pointer is the expected one. All these functions can be
removed in favor of a single isintance function in the base class,
which takes the expected vtable pointer as a parameter.
Functions which are called through the vtable, don't need to verify the
vtable pointer, and those checks are removed.
The term "backend" can be confusing because it can refer to both the
virtual function table and the device/parser backends. The use of the
term "vtable" avoids this.
This is only a preliminary version. There is certainly some room for
improvement, but the basic functionality is already in place. That
should be sufficient for daily use, and possibles issues can always be
fixed when discovered.
I forgot to update the device and parser initialization functions to
store the context pointer into the objects. As a result, the internal
context pointers were always NULL.
The public api is changed to require a context object for all
operations. Because other library objects store the context pointer
internally, only the constructor functions need an explicit context
object as a parameter.
The devinfo and clock event data is now cached internally at the device layer.
This allows the new dc_parser_new() convenience function to retrieve the event
data directly from the device handle, and applications don't have to deal with
the events anymore to create a parser.
