- add correct setting of the water type drop down for the dive shown
initially after program start;
- change salinity to have 3 decimals in planner, to make it consistency
with the log.
Fixes#4240.
Reported-by: @ccsieh
Signed-off-by: Michael Keller <github@ike.ch>
Fix an issue introduced in #4148.
Essentially the refactoring missed the fact that in the imperial system
tank size is tracked as the free gas volume, but in the metric system
(which is the one used in most of Subsurface's calculations) tank size
is tracked as water capacity.
So when updating a tank template tracking imperial measurements, the
given (metric) volume in l has to be multiplied by the working pressure,
and vice versa.
This also combines all the logic dealing with `tank_info` data in one
place, hopefully making it less likely that this will be broken by
inconsistencies in the future.
Fixes#4239.
Signed-off-by: Michael Keller <github@ike.ch>
Update the information on the available versions of Subsurface in
README.
Also update the documentation to reflect the renaming of `INSTALL` to
`INSTALL.md`.
Signed-off-by: Michael Keller <github@ike.ch>
Fix some runtime warnings when running the mobile build caused by
binding loops and deprecated handler syntax.
Signed-off-by: Michael Keller <mikeller@042.ch>
The roles DIVE_IDX and SELECTED_ROLE were used for the old selection
system and removed in b8e7a600d2d2a30f7e0646fc164ab6e57fd4782f.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For reasons unknown to me, the profile test is executed with a
weird locale, resulting in wrong formatting.
By setting the locale manually to "C", the tests start to work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After the Mac QT upgrade to 5.15.13 google maps stopped working because a debug plugin was built and not deployed. This changes forces a release build. It may or may not be the best alternative, but if nothing else it's a starting point for discussion with people who know more about qmake than I do.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
testplan.cpp had a subtle bug since converting from a fixed-size
cylinder table to a dynamic cylinder table.
As noted in equipment.h, pointers to cylinders are *not* stable
when the cylinder table grows. Therefore, a construct such as
cylinder_t *cyl0 = get_or_create_cylinder(&dive, 0);
cylinder_t *cyl1 = get_or_create_cylinder(&dive, 1);
cylinder_t *cyl2 = get_or_create_cylinder(&dive, 2);
can give dangling cyl0 and cyl1 pointers. This was not an issue
with the old table code, since it had a rather liberal allocation
pattern. However, when switching to std::vector<>, the problem
becomes active.
To "fix" this, simply access the highest index first. Of course,
this should never be done in real code! Therefore, add a
comment at each instance.
Quickly checked all other get_or_create_cylinder() calls and
they seemed to be safe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add the gas description to the label on pressure graphs to disambiguate
if multiple identical gasmixes are shown.
Also move the label to the right, where the end pressures will typically
be more spread out than the starting pressures.
Signed-off-by: Michael Keller <mikeller@042.ch>
logfile_name was converted to std::string. Assigning a strdup()ed
string to it will leak memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last use of these functions was removed in ae299d5e663c.
And that's a good thing, because snprintf-style interfaces
make zero sense in times of variable-length character
encodings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A long standing issue: the dives_to_add, etc. tables need to be
manually freed. This kind of problem wouldn't arise with proper
C++ data structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- standardise the naming;
- use it consistently;
- apply the 'samples < 50' only when putting manually added dives into
edit mode - everywhere else manually added dives should be treated as
such;
- do not show a warning before editing a manually added dive in planner.
Signed-off-by: Michael Keller <github@ike.ch>
Remove the workflow for building an ubuntu 14.04 Docker image. This is
no longer needed since the AppImage is now built on 16.04.
Signed-off-by: Michael Keller <github@ike.ch>
Improve the warning shown to the user when closing the application wile
in the planner. We now allow the user to directly discard the planned
dive, save it into the dive log, or cancel the operation altogether.
If they save into the dive log, or if they modified the dive log before
starting the planner, a second warning about the unsaved dive log
changes will be shown.
Signed-off-by: Michael Keller <mikeller@042.ch>
Suppress errors in the 'Add Artifact Comment' workflow if there are no
artifacts produced by the pull request workflow - this gets rid of
follow-on error messages when a pull request workflow encounters a build
error.
Signed-off-by: Michael Keller <mikeller@042.ch>
Error introduced in da7ea17b66: the INFO() and ERROR() macros
pass stdout instead of the format string as first parameter
to report_error(). Ooooops. How did this ever pass the
compile tests!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make multiple improvements to the existing workflows:
- create a shared custom action to deal with version number tracking
and generation;
- use this action to add the branch name to the version for pull
request builds;
- create a shared workflow for all debian-ish builds to avoid re-use
by copy / paste;
- remove potential security risks by eliminating the use of
pre-evaluated expressions (`${{ ... }}`) inside scripts;
- update outdated GitHub action versions;
- improve the consistency by renaming scripts acording to have a `.sh`
extension;
- improve naming of generated artefacts for pull requests to include
the correct version.
@dirkh: Unfortunately this is potentially going to break builds when it is
merged, as there is no good way to 'test' a merge build short of
merging.
We'll just have to deal with the fallout of it in a follow-up pull
request.
Signed-off-by: Michael Keller <github@ike.ch>
46cf2fc0867 fixed a bug where clearing of a divelog, such as the one
used for import, would erase dives in the global(!) divelog.
However, the new code used the function clear_dive_table(), which
only cleared the table without unregistering the dives. In particular,
the dives were not removed from the trips, which means that the trips
were not free()d.
This reinstates the old code, but now passes a divelog paremeter
to delete_single_dive() instead of accessing the global divelog.
Moreover, delete dives from the back to avoid unnecessary
copying.
An alternative and definitely simpler solution might be to just
add a "clear_trip_table()" after "clear_dive_table()".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The lambda that created the list of gases took a copy not a
reference of the planned dive. Of course, that never had its
gases updated. Ultimately this would crash, because this sent
an index of "-1" on change.
Fix by
1) Using a reference to the dive, not the copy
2) Catch an invalid "-1" index (by Michael Keller <github@ike.ch>)
Fixes#4188
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update the linux AppImage build to use ubuntu 16.04, and simplify it to
a single workflow running on a vanilla docker image.
This still uses the upload-artifact@v3 Action that will be EOL in
November 2024, because v4 relies on node 20 which has an unmet glibc
dependency in ubuntu 16.04. But this workflow can be updated to run on
ubuntu 18.04 by a simple search / replace and disabling some 16.04
specific PPAs.
@dirkh, @probonopd: I have moved this here from #4183 to be able to
review and discuss it without the noise of the workflow cleanup.
The workflow now also publishes the AppImage as an artifact on pull
request builds, available under Checks / Details / Summary.
Signed-off-by: Michael Keller <github@ike.ch>
Move the Qt resources required for the build for MacOS and iOS into
GitHub, into their own repositories. This removes the need to publish
them on an external file server and download them from there for every
build.
It will also make it easier for contributors to update these resources
if needed.
Signed-off-by: Michael Keller <github@ike.ch>
In the 'Download from dive computer' dialogue, make it possible to
select the source directory for the import.
Signed-off-by: Michael Keller <github@ike.ch>
Currently editing of planned dives that have been merged with actual
(logged) dives only works if the 'Planned dive' divecomputer is the
first divecomputer, and this divecomputer is selected when clicking
'Edit planned dive'. In other cases the profile of the first
divecomputer is overlaid with the profile of the planned dive, and the
first divecomputer's profile is overwritten when saving the dive plan.
Fix this problem.
Triggered by @SeppoTakalo's comment (https://github.com/subsurface/subsurface/issues/1913#issuecomment-2075562119): Users don't like that planned dives show up as their own entries in the dive list, so being able to merge them with the actual dive after it has been executed is a good feature - but this wasn't working well until now.
Signed-off-by: Michael Keller <github@ike.ch>
Do a few things:
- add a build for Debian trixie (as discussed in #4182);
- add a build for Ubuntu 24.04;
- rename the build definitions to match the build names;
- update the artifact uploads to use a non-deprecated version of the
action, and name the artifact appropriately;
- remove a stale workflow file.
Signed-off-by: Michael Keller <github@ike.ch>
Add auto-sizing to the extra info table - resize the columns so that all
rows are shown in full whenever the data is updated.
Signed-off-by: Michael Keller <github@ike.ch>
Convert some C-style strings in uemis-downloader.cpp to std::string.
This has the side effect of fixing builds on Debian Trixie, which
currently fail with the (rather silly) error:
/build/subsurface-beta-202405060411/core/uemis-downloader.cpp: In function 'char* build_ans_path(const char*, int)':
/build/subsurface-beta-202405060411/core/uemis-downloader.cpp:290:32: error: '%s' directive output between 0 and 12 bytes may cause result to exceed 'INT_MAX' [-Werror=format-truncation=]
290 | snprintf(buf, len, "%s/%s", path, name);
| ^~
......
529 | ans_path = build_filename(intermediate, fl);
| ~~
cc1plus: some warnings being treated as errors
Signed-off-by: Richard Fuchs <dfx@dfx.at>
Add instructions for using Qt 5.15.13 on MacOS, which seems to have
better support for Apple silicon.`
Provided-by: jme <32236882+notrege@users.noreply.github.com>
Signed-off-by: Michael Keller <github@ike.ch>
Update the version of Qt that is used in the CICD build for MacOS to
5.15.13. This version is showing promise for building binaries that work
on Apple silicon.
Signed-off-by: Michael Keller <github@ike.ch>
Fix a bug causing the 'Download from dive computer' dialogue to hang
when the user attempts to cancel the dialogue after successfully
downloading one or more dives.
Fixes#4176.
Signed-off-by: Michael Keller <github@ike.ch>
Add a script for building the Android APK in the docker container.
Also make some improvements to the Windows build scripts, and update the
documentation for both builds.
Signed-off-by: Michael Keller <mikeller@042.ch>
ae299d5e663cd672d1114c3fe90cf026b9ab463e introduced a format-
string bug by splitting a format-string in two and splitting
the arguments at the wrong place.
The compiler doesn't warn in this case, because the format-
string is passed through translate(...).
This should have crashed, but for some reason didn't, at least
on Linux.
Fix the arguments.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add logging of the libdivecomputer return code for errors. Also, switch
logging of errors in the background thread to callback based logging to
make it visible.
Signed-off-by: Michael Keller <github@ike.ch>
Fix the filters for planned (i.e. has at least one dive plan attached)
and logged (i.e. has at least one dive computer log attached) dives.
Also refactor the respective functions for improved readability.
Signed-off-by: Michael Keller <github@ike.ch>
Do some housekeeping and cleanup on the build scripts for Windows:
- remove Windows 32bit builds as support for this has been removed from
the mxe container;
- fix some warnings in the smtk2ssrf installer configuration;
- sanitise the output colour of the smtk2ssrf build script;
- add a docker based build script for the Windows installers;
- remove outdated and deprecated documentation and scripts.
Signed-off-by: Michael Keller <mikeller@042.ch>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be deleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be deleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be deleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be dleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be dleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Fix some findings in a Coverity scan in `core/planner.cpp` and
`core/profile.cpp`, that were reported as new after the changes
in #4126 (likely because of the rename from .c to .cpp).
Results: https://scan4.scan.coverity.com/#/project-view/60459/13160
Signed-off-by: Michael Keller <mikeller@042.ch>
Allows us to remove the strndup.h header. This code will be
even more simple, once core is fully converted away from C-strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Code such as `report_info("msg: %s", i)` may crash if `i` is
not a string type. To avoid such problems make format-warnings
hard compile errors.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code was leaking memory. Use std::unique_ptr<> for
ownership management.
This is still very primitive and divetags are kept during
application lifetime. There should probably be some form
of reference counting. And the taglist should not be global,
but attached to the divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only case left is in android.cpp, though that is only compiled
when compiling the full desktop app on Android. I.e. never. So
don't bother for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove those that are commented out, since this part of the code
will not be ported to QtQuick. So why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Let's use std::string in the core. Notably, I'd like to make
the numerous main() functions mostly independent of Qt. Some
things will have to remain, such as argument parsing, of course.
This changes the API: instead of returning an error code and
taking a pointer to the actual return-value, return an
std::optional<std::string>> that is set if the function succeeds.
Returning an empty string in the error case might be simpler,
but oh well...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use the C++-version of membuffer.
This fixes two memory leaks: report_info() on every(!) invocation
and report_error() before the error callback is set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In C++ files, replace MIN and MAX by std::min and std::max,
respectively. There are still a few C files using these
macros. Convert them in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code was crashing if it couldn't reach the cloud, because then
info.repo is NULL. Skip the test if that happens.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Had to rewrite the thing, because gcc's warnings don't work
with templatized var-args. Since there is no string-format.cpp
and I didn't want to inline it, moved it to format.cpp.
String formatting is distributed around at least four
headers: membuffer.h, subsurface-string.h, format.h
and format-string.h. This really should be unified!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Quite a bit of fallout in users of this structure.
Conveniently, since git-access.cpp is now C++ we can move
some helpers from the monstrous qthelper.cpp to git-access.cpp.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This may appear a bit ominous, as it doesn't generate a string,
but a vector of strings (one for each line). However, that is
in preparation for the QtQuickification of the profile, where
the text-items take such a list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this is the only caller, onvert the get_file_name() function
to return an std::string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to have multiple values, but is currently only checked for
true/false. Reflect that in the type.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The deco timestep is a parameter to the plan() function. There
seems no need to define this as a global macro. Probably some
code reshuffeling artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We had locale aware formatting functions that generated QStrings.
Create an alternative that creates std::string, since we want that
in the core.
This commit is unfortunate for two reasons:
- The function is called "casprintf()" for analogy with the QString
version. However, the non locale aware function is called
"format_string_std()" for analogy with "format_string()".
Ultimately these names should be unified. Probably, once there
are no membuffer users left.
- This does UTF-16->UTF-8->UTF-16 roundtrips. The core formatting
functions should render UTF-8 and only convert to UTF-16, in
the UI layer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the removal of this special case for MacOS was confirmed to be
working in the case of building with bluetooth support in #4120, we should
probably remove it from the code used when building without bluetooth
support as well.
Signed-off-by: Michael Keller <mikeller@042.ch>
Add a script that finds the changeset ID in the subsurface repository
that a given CICD release was built from.
The option '-c' can be used to check out the changeset, if one is found.
Signed-off-by: Michael Keller <mikeller@042.ch>
If Bluetooth isn't enabled, don't clear non Bluetooth address. There was an earlier concern that USB mount point shouldn't be preserved because they may change. This behavior is different on a Mac where the USB serial mount points tend to be persistent. Michael tested this on Linux and suggested on saving the mount points for Linux and Windows.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Removed blank lines - forgot that blank lines without a continuation \ would break the macro. Embarrassing to say the least. I need to figure out how to upload tested code into git.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Removed the MacOs specific code and added comment explaining why ui.device.Text must be set before the ui.bluetoothMode change handler runs.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Preserve bluetooth address if we have it (don't rescan) and for MacOS save the mount point if we have it. As best as I can tell, the mount points for USB devices do not change on MacOs regardless of the USB port being used.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Per Michael's suggestion, use isBluetoothAddress as check before skipping Bluetooth scan.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
When switching from a non-bluetooth computer to a bluetooh computer an unnecessary bluetooth scan may be forced. This patch will avoid the scan if the bluetooth device address is known.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
As far as I can see there are no translation strings for the
cylinder names, so there is no point in translating them back.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The combo-boxes (cylinder type, weightsystem, etc.) were controlled
by global models. Keeping these models up-to-date was very combersome
and buggy.
Create a new model everytime a combobox is opened. Ultimately it
might even be better to create a copy of the strings and switch
to simple QStringListModel. Set data in the core directly and
don't do this via the models.
The result is much simpler and easier to handle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When autosync to cloud was enabled, the old code would crash,
because it synced to cloud from a signal handler, which executed
the main loop when checking the cloud connection, which deleted
the object which was causing the original signal. Or something
like that. See discussion in #4119.
To avoid such problems, send a signal via a 'QueuedConnection'
from QMLManager to itself. The slot will be called once the
signal handler terminates and the main event loop retakes
control.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changes need saving, the notification text was set quite
deep in the calltree in "saveChangesLocal()". I don't know why
this was put so deep in the call tree. In any case, it prevents
asynchronous saving of the data. Therefore, pull it up to
chnagesNeedSaving().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In January it would just show the year for every day. That's
silly. Show the year only for Jan 1st.
Moreover, it would never show the month, because day-of-month
is counted from 1 (whereas month-of-year is counted from 0).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signals of the undo-stack can only be connected after it
was initialized. One of those cases where I would have preferred
a crash over a warning message. The mobile version is extremely
noisy!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was added in d9b39efeb7998392524ff2197683aef50246c6ab,
but never used as far as I can see...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a crash condition when opening the cloud from
desktop: The old code passed a NULL pointer that was then
assigned to an std::string, which is not supported.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove the options to expand entities and so continue when encountering invalid /
malformed XML, as both of these can be exploited by supplying
maliciously crafted XML.
Signed-off-by: Michael Keller <mikeller@042.ch>
Q_FOREACH and foreach are anachronisms.
Range based for may cause a performance regression: it can
lead to a copy of shared containers (one reason why Qt's
COW containers are broken). However, as long as there is no
user noticeable delay, there is no point in analyzing each case.
And also no point in slapping an 'asConst' on every container
that is looped over.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To avoid memory management woes. These shouldn't be global
variables, but let's fix that later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no subclass of ConfigureDiveComputerDialog, so there
seems no reason for protected members.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The memory managements for DeviceDetails was very sketchy.
First of all, sharing a pointer to a structure between threads
seems like a recipe for disaster. Secondly, the structure was
a QObject and when first generated included in the (silly)
Qt object tree, but when generated in the threads it was not.
Clearly, this leaks.
Instead, use value semantics and use local copies of the
structure. I didn't go full length and use std::move to
move the data, because this doesn't work through signals
(which are the wrong abstraction here, but OK) and secondly
I didn't have time to analyze whether the caller still
needs the data after passing it down to the worker thread.
To be able to pass an object through signals, the class
has to be registered in the Qt MetaType system. Super
ugly, but fine for now. Ultimately, this whole thing should
probably be replaced by futures, co-routines, or whatever.
Moreover, this removes the prefix from number of "m_*"
function parameters. By convention, "m_" marks member
variables, which function parameters are not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
make DeviceDetails a metatype
So that we can pass it as value through the signal/slot system.
(squash with original commit)
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a build for subsurface-downloader to the CI pipeline. The artifact
is currently not used, but this will ensure pull requests breaking the
downloader are spotted before they are merged.
Signed-off-by: Michael Keller <mikeller@042.ch>
Downloder builds pull in show_computer_list() from
downloadfromdcthread.cpp, but it's declared as extern "C". With 76c2069f
having converted subsurfacestartup.c to .cpp, we can remove the extern
"C"
Signed-off-by: Richard Fuchs <dfx@dfx.at>
Add 'Country' to the fields that are indexed for fulltext search - this
seems to be a quite intuitive choice as 'Country' is also a field that
is available in the dive list view.
Fixes#4134.
Signed-off-by: Michael Keller <mikeller@042.ch>
Opportunistically fix some problems newly raised by a recent Coverity
scan.
Not touching any of the string memory allocation issues as this is being
handled by the move towards C++ strings.
Signed-off-by: Michael Keller <mikeller@042.ch>
This give compile time checking. In fact, one of the connections was
not working (currentIndexChanged(QString) doesn't exist in newer(?)
Qt versions).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printf() is a horrible interface as it does no type checking.
Let's at least use the compiler to check format strings and
arguments. This obviously doesn't work for translated strings
and using report_error on translated strings is dubious. But OK.
Had to convert a number of report_error() calls to supress
warnings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
qthelper.h is an absolute monstrosity and it is unclear what
report_info and SSRF_INFO have to do with Qt.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This mimics the code added in commit cf990b0f39 ("preferences: choose language
code with one '-'") and adds some debugging for the mobile case - some people
are being presented with Subsurface-mobile in Korean for some reason.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When initializing a string with multiple characters, first
comes the length, then the size. Not the other way around.
Fixes#4127.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix bug introduced in 505e4e47eb.
Nobody complained, so not clear if that was user visible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On initialization, the old code searched for the first language
code containing a '-'. However, my Qt version gives de-Latn-DE
as the first entry. That messed up the preferences code: it
didn't recognize that entry. Thus, simply opening and closing
the preferences switched the language to Bulgarian.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a pattern of code like
match_action(line, state, dive_action, ARRAY_SIZE(dive_action));
The doubling of the array might cause copy & paste errors, where
only one array is replaced.
Therefore, determine the length of the array with (hopefully
easily understood) template tricksery.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When iterating over the converted strings of a line, the
first entry of the array would be popped off, leading to
a full copy of the remaining array.
Instead, use an index in the parser state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The converted strings were stored in a membuffer and later
converted to std::strings. Generate an std::string directly
to avoid unnecessary copying.
Ultimately, when the core structures are converted to
std::string, there should be no copying of the string data
at all (unless formatting is applied or small string
optimization kicks in, of course).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a format_string_std function that works like format_string,
but does return a std::string instead of a strdup()ed C string.
Make it a global function to be used in other parts of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This avoid memory-management troubles. Had to convert a few
of the parsers (cochran, datatrak, liquivision) to C++.
Also had to convert libdivecomputer.c. This was less
painful than expected.
std::string is used because parts of the code assumes
that the data is null terminated after the last character
of the data. std::string does precisely that.
One disadvantage is that std::string clears its memory
when resizing / initializing. Thus we read the file onto
freshly cleared data, which some might thing is a
performance regression. Until someone shows me that this
matters, I don't care.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Return an std::string to avoid memory management headaches.
While doing that, convert time.c to C++ so that
format_datetime directly returns an std::string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was very annoying, because the old code was not const-clean
at all and trampled all over buffers. This makes the new code
pretty messy for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The automatic conversion from char * to QVariant failed to
compile for me. Let's hint that this should be interpreted
as a string. No idea, why this happens for me, but apparently
not on CI.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make the memory management easier to follow. I feel that the old
code was leaking left and right, but not sure because it was so
intractable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simplifies memory management. Think about unglobalizing this,
once everything is in C++ so that we can put an std::string
into struct divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This includes using the C++ version of membuffer. There appears
to not have been a leak, because the buffer is freed in
flush_buffer(), but usage was somewhat inconsistent and hard to
follow.
Also, convert some string handling to std::string to avoid free()
madness.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_changes_made(), subsurface_user_agent() and normalize_cloud_name()
are only called from C++.
Avoids having to manually free the returned value and is therefore
more robust against leaks.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code is now much easier to check for memory leaks,
since there are no explicit free()s. Yes, memory is not
released immediately, but that should be of no concern.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes default behavior when creating a sample struct
in C++ code: it is now initialized to default values. If this
ever turns out to be a performance problem, we can either add
additional constructors or use special functions that do
not initialize memory, such as make_unique_for_overwrite.
This removes non-standard (respectively >C++20) constructs,
namely designated initializers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Avoid error-prone malloc/free pairs. This uses somewhat
obscure constructs to stay as close as possible to the
original C code. Notably, it uses mostly unique_ptr<T[]>
which doesn't store the length of the array, because the
length is supposed to be known.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Long term project: convert core to C++ so that we can
use higer-level constructs, notably std::vector<>.
This does not change any code - only fixes compile issues.
Mostly casting of (void *) to the proper type. Also designated
initialization of the sample struct had to be rearranged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the core, we usually want C strings, not QStrings. Therefore,
make translated C strings directly available from C++.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function clear_*_table frees all elements of the table.
However, persumably as a performance feature, it kept the
memory of the table itselt (i.e. it only reset the number of
elements but kept the capacity).
That is fine if the table is reused later. However, this
function was also used when freeing the table and this
would leak the table memory.
This commit frees the table memory. An alternative would
be to have separate clear_*_table and free_*_table functions.
But let's wait with that until we port the table code to C++.
Then this will be "automatically" fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Firstly, why calculate something when the next statement is a return
anyway.
Secondly, the calculation subtracts two completely unrelated pointers.
This must be some code reshuffling artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Determine grade based on whether we actually managed to check out the
buildnumber.
This assumes that the tree is clean for building a stable snap (one that
can be published to candidate and stable channels).
Signed-off-by: Michał Sawicz <michal@sawicz.net>
Add support for the new dive computer models that have been added in the
latest version of libdivecomputer.
Signed-off-by: Michael Keller <mikeller@042.ch>
Adding temp support for divelogs.de import/export.
Adding export of divecomputer model to divelogs.de export
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
While the startup flow should make it obvious when a user is not
correctly logged into the cloud, we still do see fairly frequent
situations where a user has an incorrect password on a mobile device and
is confused about why their data isn't syncing with their PC. Now this
is clearly shown in the main menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, the "hide event" status is lost when switching dives.
Save it in the event struct instead to make it persistent.
In the future we might save this information to the log file.
Then this should be integrated in the undo-system.
This commit also makes the "unhide events" menu entry more
fine grained: It now differentiates between individual
events and event types.
Note this adds an additional field to the event structure.
There is a "deleted" field that is used internally for
book-keeping, but probably should be removed. Not touching
this at the moment as long as this is C-only code. When/if
switching to C++ we can make the event linked list a table,
which will make this much simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently the event type code uses libdivecomputer's flags
to differentiate between events. Make this explicit and extract
the event severity.
The reason is that later we want to be more explicit about showing/
hiding events and thereto we must format the name of events.
Moreover, this encapsulates the complexities of extracting
the severity in the event code (that used to be in the profile
code).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing name / flag pairs to event_type functions,
pass a pointer to the event. This hides implementation details.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This structure is used to hide events of a certain type.
The type was inferred from its name, but now includes flags.
So event_type is more appropriate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- move the spinbox closer to the senter
- improve sizing and spacing of the spinbox
- hide it when we aren't showing the calculated ceiling
Also address an odd whitespace issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix how the cloud synch status is handled - currently the preference is
used incorrectly, switching cloud synch off when it should be on.
Also hide the 'Manual cloud synch' button when no cloud credentials are
stored, and don't show the 'manual synch' popup when auto synch is
enabled.
Signed-off-by: Michael Keller <github@ike.ch>
Reinstate the hiding of events by event type across
all dives in the log. This was unintentionally removed in #3948.
Also change the event type to be specific to name and severity, and fix
bug causing 'Unhide all events' to not show when only individual events
were hidden.
This still leaves the inconsistency that hiding of similar events is
persisted across the switch between dives, but hiding of individual
events is lost when switching dives, which is mildly confusing.
Follow-up to #4092.
Signed-off-by: Michael Keller <github@ike.ch>
Automate processing of the documentation to ensure it is processable.
Also fix some bugs in the existing input files for the documentation and
re-enable linting.
Signed-off-by: Michael Keller <github@ike.ch>
- fix typo in Makefile
- remove unmaintained Russian translation
- try to fix incompatibilities with current asciidoc version
- update processed files
Unfortunately I wasn't able to figure out one error that stops the linting of
the mobile manual from succeeding - as a result I turned of linting for now
(that's the '-L' flag that was added to a2x)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner uses a one-past-end pseudo cylinder for marking the
surface interval outside of water. This overflowed arrays in
setup_gas_sensor_pressure().
See #4086. Note: contains a second unrelated crash report.
As a band-aid allocate bigger arrays. But obviously, the proper
fix is to not generate invalid gas-change events.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix the configuration of the deco ceilings in the mobile version:
- make the settings work;
- remove reading of the dive computer ceiling from git;
- hide the gradient factor in the profile when the calculated ceiling is
not shown;
- when the calculated ceiling is disabled in the settings, disable
editing of the gradient factor.
Signed-off-by: Michael Keller <github@ike.ch>
This once again is reasonably specific to the way I have things set up but
might help someone else trying to figure out how to get things done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a button that opens the 'Contribute' page to the 'About' dialogue,
to encourage more users to start to contribute.
Requires https://github.com/subsurface/new-website/pull/36 to be
deployed to have a valid link target.
Signed-off-by: Michael Keller <mikeller@042.ch>
Add a file containing the release title (derived from the pull request
title / commit message) to CICD releases - this is so that it will be
able to pick this up by the process updating the release pages on our
webserver, and show a list of the last few changes for each release.
Signed-off-by: Michael Keller <mikeller@042.ch>
Fix the generation of <switchmix> elements in the UDDF export.
Also change the ids of gasmixes to include the helium fraction, and
fractions of a percent, in order to make UDDF export suitable for
technical diving.
Signed-off-by: Michael Keller <github@ike.ch>
The save_dives() function saves dives from the global divelog object.
Use the same object when calling parse_file() so that we don't end up
with an empty output log file.
Signed-off-by: Richard Fuchs <dfx@dfx.at>
If the XML document could not be parsed then `root_element` will come
out as NULL. Check this before trying to dereference it.
Signed-off-by: Richard Fuchs <dfx@dfx.at>
Fix the persisting and use of gradient factor preferences for dive
profiles in the mobile version.
Also rename the mobile backend gradient factor settings to make it
obvious that they are used by the (not currently enabled) planner.
Signed-off-by: Michael Keller <github@ike.ch>
While for the other platforms we can simply copy our binaries (maybe
after signing them), for Fedora and Ubuntu we have to trigger fresh
builds.
The most logical way that I could think of to do this was to push the
same commit corresponding with the intended current release into a
branch named 'current' and have that trigger Copr and Launchpad builds
that post into our release repos.
So 'master' keeps moving forward, keeps creating new build numbers.
At some point we pick a build number that we want to be the next
'current' release. We then update the current branch to the commit that
corresponds to that build number and push the current branch which
triggers new builds in the correct repos on Copr and Launchpad.
This commit removes the silly 'push' argument from the make-package
scripts (after all, they are used to push those packages to the
respective build services) and instead use the branch name as argument
to those scripts - allowing us to pick which repo to push into.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This must be the number one support request we get. I can't believe we never
thought of adding a button to do this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restructure 'CONTRIBUTING.md' to show the different ways to contribute
more clearly, and to add a specific section about joining the
contributors' community.
[skip ci]
Signed-off-by: Michael Keller <mikeller@042.ch>
The Divesoft Liberty has four O2 sensors. So far, we had a hard coded
limit of three sensors and crashed with a failed assert when we
encoutered more than three. This allows for up to
MAX_O2_SENSORS which is currently 6. The voting logic is adapted
accordingly: We sort the values and we keep deleting the values that
differ more than 20% by value from the closest. This follows what
Shearwater implements on their computers.
In some of the import/export functions the value is still hard
coded to 6 thanks to explicit field names.
Signed-off-by: Robert C. Helling <helling@lmu.de>
With no files given and no config present, the downloader segfaults due
to empty `files`. Print a message instead.
Signed-off-by: Richard Fuchs <dfx@dfx.at>
Move the GitHub Action that builds the Windows artefacts to use the new
subsurface/mxe-build:3.1.0 container.
Also rename references to the old container in scripts and
documantation.
Signed-off-by: Michael Keller <github@ike.ch>
It appears that this dependency is no longer provided (as of Mantis), but also
no longer needed (as a build without it appears to completed). Let's see if
that fixes our Mantis build issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a GitHub action that builds the docker image to run builds for the
Windows (MXE) version of Subsurface.
Also update the MXE image Dockerfile to the latest version of MXE, and
add a patch to use a current version of mdbtools.
Configure GitHub actions that do not build docker images to not trigger
on changes to the contents of `scripts/docker/`.
Signed-off-by: Michael Keller <github@ike.ch>
The GPS tracker functionality was removed from Subsurface-Mobile a while ago. This commit changes the documentation to reflect the current state of the Subsurface-Mobile application.
Reported-by: Simeon Geiger
Signed-off-by: Simeon Geiger <simeon.geiger@gmail.com>
When trying to build the integrated user manual,
the linker stopped with the error message "undefined reference to vtable ...".
This is a subtle bug, connected to the qt preprocessor MOC.
Adding "set(CMAKE_AUTOMOC ON)" to the desktop-widgets/CMakeLists.txt fixed the problem.
For more information, see:
https://github.com/bincrafters/community/issues/466https://cmake.org/cmake/help/latest/prop_tgt/AUTOMOC.html
Signed-off-by: Simeon Geiger <simeon.geiger@gmail.com>
We use the latter pretty consistently, so let's remove the few
left instances of the former.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fp_get_data() returns a copy of a string that must be freed.
Fix this in save-git.c. The analogous function in save-xml.c
has already been fixed. However, change the code to be more
idiomatic: since we own the pointer, make it "char *" instead
of "const char *". Then we don't have to cast on free().
Ultimately, we really should change string manipulation code
to C++.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly irrelevant std::move() stuff of copy-on-write Qt objects,
a few real bugs, a timestamp_t downconversion and some codingsyle
adaptation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the InformationTab a signal is emitted when programatically
setting the index of the dive mode combobox which in turn then
edits the dive.
Usually not a problem, because the editing code realizes that
the value is not changed. It is however a problem when multiple
dives are selected.
Therefore, block the signals when setting the index. Same for
the other comboboxes on the same page.
Fixes#3960.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerWidget was initialized before the planner models.
However, it attaches these (non existing) models to the comboboxes.
That can't work. Initialize in correct order.
Fixes#4014
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If prefs.show_icd is false, this function does nothing, but
the output parameter is checked by the calling function
DiveEventItem::setupToolTipString().
Let's reset the strucvture to 0.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adjusting picture times, the offset in seconds is stored in a
32-bit int. Make it a 64-bit int. Sounds crazy, because why would
you want to move the pictures by more than 70 years?
Well, suppose it is the year 2039, for some strange reason your
camera was set to unix epoch and you want to adjust the pictures
to current time.
Ok - that's a far-fetched scenario. The real reason is that this
hopefully silences a Coverity warning and avoids integer casting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unfortunately Coverity doesn't understand that most Qt data
structures are copy-on-write. It's a mis-feature of Qt, but
it is the way it is. Thus, passing by value is not an issue.
Out of ca. 25 warnings only two were legit. Let's silence
the others by either std::move()ing or passing by reference,
as would be idiomatic C++, which Qt is not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add more information to metainfo file and update it to the AppStream 1.0
standard
* Added screenshot caption, more URLs and a <launchable/> tag
* Replaced <developer_name/> with <developer/>
Now the file conforms to the AppStream 1.0 specification
Signed-off-by: Alexander Wilms <f.alexander.wilms@gmail.com>
There are two enums related to the type of dive.
There is the global
enum divemode_t {OC, CCR, PSCR, FREEDIVE, NUM_DIVEMODE,
UNDEF_COMP_TYPE};
and the anonymous
enum {AIR, NITROX, TRIMIX, FREEDIVING} dive_type;
in struct plot_info.
In profile.c FREEDIVE (of divemode_t) is assigned to dive_type.
This only works because by chance(?) FREEDIVE and FREEDIVING are
the fourth element of each enum.
Fix this. C truly is a bad language when it comes to types
(very weak) and namespaces (non existing).
Contains whitespace fix.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Current instruction to get the installer out the container will fail
with bash complaining about cp being a binary. Then would fail too
because subsurface-installer.exe doesn't exist any more.
Proposed instruction should work.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
It is very strange that in some yaml files the $(<release-version) construct
works just fine, but in others it evaluates to an empty string, even though the
file is there an has the correct content.
Attempting to get more debugging info and also use a different expression to
extract the information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That was the whole point of the previous change.
Also, run the build number creation on a pull request as well (at least for a
while) so we don't need to create new releases in order to test that part of
the process).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make it easier to see what's happening inside get-atomic-buildnr.sh
write the result to a file that can be read by the caller. Not quite as
elegant, but hopefully more practical to see what's going wrong when no new
build number is created.
Make sure that post-releasenotes is successfull by actually posting a release
artifact (apparently the gh release action otherwise quietly fails).
Try to ensure we find the Android APK when uploading to the release.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some experimentation showed what should have been obvious. The release
information is additive. So it's enough if ONE of the actions creates release
notes, all the others can simply add additional release artifacts.
To make this more obvious, this commit creates a new action that does nothing
but create the release notes and publish the release. Since it really doesn't
do anything else, it's likely to be the quickest to complete, but that doesn't
matter - the last action that has a body or body_path in the gh-release action
determines the release notes. And we now have exactly one action that does so.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using a thirdparty action and painfully passing things around,
simply use the GitHub CLI (gh) and assemble the release notes on the fly.
This makes for much simpler and much easier to maintain code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The get-or-create-buildnr.sh script writes a nice message to stdout which is useful
when using it interactively - but it broke the scripting; so redirect that output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move both code and the release note text into files that can be shared between
multiple actions.
This should make the actions smaller and easier to read and since this is used
in several actions it should make things much easier to maintain.
In order to test this without too much unnecessary noise, this commit only
changes the android workflow - the others will be changed in a later commit
once his has been tested and works (again, this can really only be tested by
merging the PR into master).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have a strange crash on exit on iOS and this looks like the likely culprit.
And since it happens at app exit, I'm not too worried about leaking memory...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move around the scripts required for the setup of the build environment
for android to satisfy docker's requirement of locality.
This allows the removal of an extra copy step, and avoids the creation
of extra artefacts, while still providing the same functionality.
Signed-off-by: Michael Keller <github@ike.ch>
Add signing of the android APK to the scripts used by the CICD pipeline.
Also update the example for running these scripts locally, and add the artefacts generated by doing so to .gitignore.
Signed-off-by: Michael Keller <github@ike.ch>
All version information has to be integers, but at least the full version
allows a fourth digit which we can increment for local commits.
Update the plist fragment and script accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hasn't been used on the backend in a long time (and appears to get
stripped out on several platforms). No point in keeping it around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the update to the copyright year really isn't required, it just looks
better.
By using the canonical instead of the git version in user visible strings we
are creating more consistency in how we refer to the version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the android build docker image:
- rebase on ubuntu 22.04;
- add tooling required to sign APKs;
- changes to make the container re-usable;
- change to a multi-stage build to keep the image size smaller;
- generic improvements to the Dockerfile
Also update the example script for how to use the container.
Signed-off-by: Michael Keller <github@ike.ch>
- for now all versions start with v6.0
- CICD builds use the monolithic build number as patch level, e.g. v6.0.12345
- local builds use the following algorithm
- find the newest commit with a CICD build number that is included in the
working tree
- count the number of commits in the working tree since that commit
- if there are no commits since the last CICD build, the local build version
will be v6.0.12345-local
- if there are N commits since the last CICD build, it will be
v6.0.12345-N-local
- test builds in the CICD that don't create artifacts simply use a dummy release
in order to not incorrectly increment the build number and also not to waste
time and resources by manually checking out the nightly-build repo for each of
these builds.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They are now the four digit version dash build nr
So major.minor.patch.commitsSinceTag-buildNr
This makes it easier to correlate the release name and a specific manually
built version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current XCode and Qt 5.15.2 (the newest version that we can use due to Kirigami
and the lack of binaries for the later open source releases of Qt 5.15) have some
issues. Work around those.
Also, don't create fat armv7/arm64 binaries anymore for iOS - there are no supported
armv7 devices anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Increase the precision of the setpoint that can be specified per planned
leg of the dive to 0.01 mbar.
Some rebreather models (APD Inspiration) support this precision for
setpoint setting.
Motivated-by: https://groups.google.com/g/subsurface-divelog/c/pD5gYlG5szI/m/G8_as4TyBwAJ
Signed-off-by: Michael Keller <github@ike.ch>
Documentation about all this on GitHub is a bit confusing.
I'm not entirely sure that this is the way to go. But I can't try
until this gets merged into master.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I ran into this a couple of times where the debug output didn't seem to
make any sense until I understood that libgit simply didn't give me
detailed error info.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not a great way to load-balance, but it works and doesn't require
high end hardware on the backend.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the name of the `GITHUB_WORKSPACE` environment variable in the
android build script to `OUTPUT_DIR`, which is more intuitive when the
script is used for local builds.
Also test if the variable is defined before attempting to use it as the
target of the build output.
Signed-off-by: Michael Keller <github@ike.ch>
This is the oldest format I know for SmartTrak databases. Probably the
first one. It just supports one tank, only air/nitrox and the format of
the database is dramatically different from the other two formats known
to me.
It has different tables, and the "Dives" table differs a lot from newer
versions.
I don't think it's worth to give support for this format, as newer
versions of SmartTrak software automatically comvert the oldest format
to newer one. Thus, finding a lot of this format files is not expected
except from some corner cases of users who had not updated their
SmartTrak software for years now.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Original mdbtools developer gave up the project some time ago, and it's
continued with his permission in a forked repo:
https://github.com/mdbtools/mdbtools.git
There was a nasty bug in libmdb, triggered under some rare circustances,
that is solved in the new repo which is, BTW, under current
development.
Move our scripts to the new repo and set our working version to the
latest release tag, currently, "v1.0.0"
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Prevent attempts to generate a build number for pull request builds as
they will fail due to the lack of permissions on the
`subsurface/nightly-builds` repository.
Signed-off-by: Michael Keller <github@ike.ch>
The necessary keys to do so aren't available (and of course we don't try
to post a release on pull requests, anyway).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What a pain. It turns out that github.run_number is counting the number of
times a specific workflow has been run - but that's different for different
workflows, so using that won't get us a single tag with all the corresponding
build artifacts. And sadly I can't find a simple atomic way to increase a
GitHUb repo variable, so I came up with this somewhat convoluted dance, using
the the fact that a push to an existing brach that isn't a fast-forward will
fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix the 'Snap USNs' action.
According to https://bugs.launchpad.net/lazr.restfulclient/+bug/2041407
the an incompatibility is introduced by the move from python 3.11 to
3.12, and a workaround is to pin the version to 3.11.
Signed-off-by: Michael Keller <github@ike.ch>
Add a warning to the initial login screen telling the user that the
first synchronisation can take a few minutes.
Fixes a misunderstanding pointed out in a recent post in the Subsurface
mailing list.
Signed-off-by: Michael Keller <github@ike.ch>
This way our ongoing releases will be in their own repo.
Also, use a nicer date format (at least I think this looks nicer).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need some additional options when building the package, so let that script
handle the details and use the generic build script mainly for the dependencies.
Also let's not mix building for testing and building the DMG - just so I can
stay somewhat sane.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'git describe' command finds the most recent tag instead of the
SHA1. When trying to build from a repository without any tags, for
example in a fork, this causes the build to fail.
Use the '--always' option to fallback to the SHA1 in case no tag is
present.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Pull requests can be triggered by anyone - we should not publish code
that comes in through pull requests to either GitHub releases or
Launchpad, Copr, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's embarrassing that we kept doing this for so long. Debian and Ubuntu
have had new enough versions of libgit2 for a very long time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there are no gas mixes returned by libdivecomputer, we need to default to air. The previous commit would have defaulted to pure oxygen.
Signed-off-by: Micha WERLE <micha@michaelwerle.com>
During code review, an argument was made to use the bottom gas mix as
the mix to fill additional tanks with instead of the last mix reported
by the dive computer.
This change implements `get_deeper_gasmix` which compares two gas mixes
and returns the one with the lower MOD. This comparison does not perform
actual MOD calculations but only performs a relative oxygen and helium
content comparison.
Instead of saving the last gas mix and assigning it to additional tanks,
a `bottom_gas` mix is saved and assigned instead.
Signed-off-by: Micha WERLE <micha@michaelwerle.com>
Reverted "optimisation" based on code feedback.
Firstly, it's implementation-defined whether or not a stack frame is created for sub-scopes, secondly any optimisation is questionable regardless, and thirdly it was felt that it makes the code harder to understand.
Signed-off-by: Micha WERLE <micha@michaelwerle.com>
Instead of defaulting to air when we run out of gas mixes to assign to
cylinders, use the last gas mix provided by the dive computer.
If no gas mixes are provided at all, then default to air.
This prevents Subsurface from "inventing" gas mixes which are not
reported by the dive computer. It also works very nicely with a sidemount
configuration where the dive computer typically reports two cylinders but
only a single gas mix.
Signed-off-by: Micha WERLE <micha@michaelwerle.com>
It's unclear if this will be enough to use gcc 10 by default when building
Subsurface using this container.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The divecomputer_device_open() function tries all supported transports
one by one, and exits as soon as one is opened successfully. When the
end of the function is reached, the DC_STATUS_UNSUPPORTED error code is
returned.
The annoying side effect is that the actual error code returned by the
transport is ignored and changed into DC_STATUS_UNSUPPORTED. This is
very confusing while troubleshooting download problems.
Fixed by initializing the error code to DC_STATUS_UNSUPPORTED, in case
no transport is available for trying, and returning the last reported
error to caller.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Add the Aqualung i330R and Apeks DSX model numbers to the Pelagic
pattern table. These two models also use a new BLE service UUID.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
The UUID of the Divesoft BLE service needs to be added to the list of
known services. It's a 16-bit UUID that gets detected as a standard
service and is ignored otherwise.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
This adds a test for the bug just fixed, where we have a trimix gas and
nitrox/air with less o2 than the trimix.
Signed-off-by: Anton Lundin <glance@ac2.se>
When we've already seen a trimix gas, of we after that see a nitrox gas
with less o2, it shouldn't update the mino2 state.
Signed-off-by: Anton Lundin <glance@ac2.se>
When the import from a dive computer gives you 100% as the first gas,
the get_dive_gas never finds which gas had the lowest o2 percent.
This fixes the logic to find the lowest o2 percent in any dive cylinder
list.
Signed-off-by: Anton Lundin <glance@ac2.se>
It looks kinda strange that all CCR dives have a dive gas ..100%, so
rather than showing it as the dive gas used, just ignore cylinders
with usage flagged as oxygen.
Signed-off-by: Anton Lundin <glance@ac2.se>
Fix deprecation warnings for actions using a deprecated version of node.
Also switch to a fixed version of the environment in order to avoid
future deprecation warnings.
Signed-off-by: Michael Keller <github@ike.ch>
If enabling the notification fails, receiving data packets is not
possible. Instead of silently ignoring this fatal problem and trying to
continue, report the error back to the caller.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
This does two independent things:
It sets the planner state early enough so the appropriate
default profile for the planner is created (without
safety stop).
Upon cancelling the planner, it resets the profile widget
to profile more (rather than planner) as otherwise upon
the next change into the planner the planner model is
not properly initialized.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
To be used on Subsurface merch, this introduces versions
of the Subsurface icon with the program's name and web
address.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The existing logic correctly calculates the minimum (ie, ending) pressure, but not the maximum
(ie starting) pressure.
For example, 2 tanks A and B with manual pressures (same tank on subsequent dives, which were
then merged):
A: 205 - 84
B: 83 - 55
When merging the starting pressures, the call is : merge_pressure(205, 0, 83, 0, false)
The final comparison is:
if(false && 205 < 83) return 205;
else return 83;
-> So 83 is returned even though 205 should have been.
Signed-off-by: Michael Werle <micha@michaelwerle.com>
When events are hidden in the profile, only hide events with the same
name and the same severity (flags).
From discussion in https://github.com/subsurface/libdc/pull/54.
Signed-off-by: Michael Keller <github@ike.ch>
Fix how gases are marked as 'used' and kept from being deleted in the
equipment tab for CCR dives.
It does not make sense to treat the (arbitrary) first gas in the list
with a usage type of 'diluent' or 'oxygen' as 'used' and prevent the
user from deleting it. Dive computers report the initial diluent and
any other diluents used through a 'gaschange' event, so the actually
used diluents are already picked up as part of gaschange event based
logic.
Also clarify the selection of the first diluent used as a default if no
gaschange events exist.
Also fixed the test data - gases that have a pressure change should be
included in the profile if they do not have a gas change recorded
against them by other dive computers, even if they are oxygen.
A secondary problem shown by this is that the pressure change is not
applied to the profile - the pressure is currently shown as constant on
the start pressure. But this is for another pull request.
Signed-off-by: Michael Keller <github@ike.ch>
Include unused tanks in merges of multiple logs into a single dive if
the 'Show unused cylinders' preference is enabled.
Also rename the preference (in code) to `include_unused_tanks` to
reflect the fact that it is already used in more places than just the
display (exporting, cloning dives).
Simplified the cylinder model to make forced inclusion of unused tanks
dependent on use of the model in planner.
Leaving the persisted name of the preference as `display_unused_tanks`
to avoid resetting this for all users - is there a good way to migrate
preference names?
Signed-off-by: Michael Keller <github@ike.ch>
Mark gases that are reported as 'inactive' by the dive computer as 'not
used' in the Equipment tab.
Requires https://github.com/subsurface/libdc/pull/52.
Signed-off-by: Michael Keller <github@ike.ch>
Load the dive computer list in the 'Change Settings on Dive Computer'
dialog dynamically.
Also incorporate suggestions from
https://github.com/subsurface/subsurface/pull/3925#issuecomment-1595784076.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Michael Keller <github@ike.ch>
The conversion between mbar and depth sometimes uses DC's salinity, sometimes user's salinity. By other hand, it uses surface pressure given by user in calculation.
This fix try to standartize this values, using them from same source.
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Today salinity combo is editable if one of these rules matches: The dive was manually entered or if salinity edition is allowed in preferences.
However we can have cases that dives were downloaded but its doesn't have salinity info.
This fix considers if there's a DC salinity info to decides combo edition and if salinity change indicator will be showed or not.
If DC doesn't have salinity, the UI behavior is the same of a manual dive
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Add an explicit checkbox to the 'cloud auto synch' status toggle in the
mobile 'Dive Management' menu in order to make it more intuitive to
understand.
This isn't super pretty, but I think it will improve the usability. A
prettier way to achieve this will be to redesign the `ic_cloud_off.svg`
/ `ic_cloud_done.svg` in order to make them intuitively recognisable as
unchecked / checked checkboxes.
Example of a support request caused by confusion from the current
implementation: https://groups.google.com/g/subsurface-divelog/c/9X-hTt9NFlE/m/ZcqtdOOhBQAJ
Signed-off-by: Michael Keller <github@ike.ch>
Fix the cylinder pressures in the CSV summary export. Only show
pressures derived from `pressure` attributes in samples for the first
cylinder. Add support for showing pressures derived from `pressure0` ...
`pressureX` attributes.
Also cleaned up unit conversions, and changed tabs to spaces.
From discussion in
https://github.com/subsurface/subsurface/pull/3906#issuecomment-1575980882.
Signed-off-by: Michael Keller <github@ike.ch>
It looks like Qt company has LGPLed versions tagged wich simplifies
things a bit while building, e.g. 5.15.3 current workaround matches
"v5.15.3-lts-lgpl" tag.
Background: Debian Sid is currently at Qt 5.15.8 which is impossible to
build from scratch with current script as only a few git versions are
tagged in the script format "v5.15.8".
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Add a button that allows the user to hide the infobox with statistics
about the point in the dive under the mouse cursor in order to be able
to see the full dive profile unobstructed.
Signed-off-by: Michael Keller <github@ike.ch>
Regroup the file menu entries to give the dynamically generated
'recently opened files' their own section.
Signed-off-by: Michael Keller <github@ike.ch>
Add meaningful error messages when creating a libdivecomputer dump. In
particular show if creating a dump is not supported on the dive computer
that is used.
Signed-off-by: Michael Keller <github@ike.ch>
Use the dive computer / device information that was persisted when
previously downloading dives or configuring the dive computer in the
dive computer configuration dialog.
Also rename 'Connect with bluetooth' and 'Cancel' buttons in the dialog
to make them more consistent with what they do.
Signed-off-by: Michael Keller <github@ike.ch>
The memory management and string concatenation was hard to follow.
Since the mobile files ios.cpp and android.cpp were already
converted to C++, let's do the same for Unix, Windows and MacOS.
Simply store the default directory and filename in a function-level
static string. Thus, it will be initialized on first call and
freed on application exit. Since the std::string data is
guaranteed to be contiguous and zero-terminated, it can be used
from C code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rework of the XSLT used to generate the Summary CSV export:
- fixed a bug causing invalid CSV to be generated for double quotes
(`""`);
- changed quoting and escaping to be compliant with RFC 4180;
- changed output to contain information for all cylinders for all dives
(instead of limiting the number of cylinders to howevermany are used
for the last dive);
- added an index to the cylinder data headings;
- changed unit designators to use `[]` instead of `()`;
- some minor improvements to the XSLT.
Signed-off-by: Michael Keller <github@ike.ch>
Fix the issue that Gradient Factors cannot be set to 100 in the mobile
version. This is done by changing the edits from a text box to a spin
edit, which seems to be a better match for numerical values.
As a side effect this also solves the issue that the keyboard for the
text edit is not properly displayed when settings are opened when dive
details are already on the page stack.
Fixes#3911.
Reported-by: @gbetous
Signed-off-by: Michael Keller <github@ike.ch>
Rework the setting of custom date / time format preferences:
- fix bug causing case changes if custom format case insensitively
matches a drop down entry;
- fix invalid format examples in tooltip;
- update URL for the format documentation;
- add support for quoted literals to the format validity warning.
From discussion in
https://github.com/subsurface/subsurface/issues/3849#issuecomment-1481239270.
Signed-off-by: Michael Keller <github@ike.ch>
Add support for tracking the gas usage across multiple tanks to the 'bar
used' and SAC values shown for the profile ruler.
The following rules are implemented:
- a tank is considered 'used' if at least one bar has been consumed;
- only used tanks are taken into account for calculations;
- 'bar used' is only shown if all tanks used have the same (or unknown)
volume;
- SAC is only shown if all tanks used have a known volume.
Fixes#3902.
Reported-by: @pabdakine
Signed-off-by: Michael Keller <github@ike.ch>
Update libdivecomputer to include the changes from the libdivecomputer
v0.8.0 release:
- Divesoft Freedom and Liberty support
- A couple of iostream abstraction layers: a new 'packet layer' and a
HDLC layer, moving code from low-level dive computer downloaders to
generic iostream layers.
- misc minor updates
Signed-off-by: Michael Keller <github@ike.ch>
Remove `renderSVGIcon()` and `renderSVGIconWidth()`, as QPixmaps can be
loaded directly from SVG, and support scaling.
Signed-off-by: Michael Keller <github@ike.ch>
Use SVG files as source for icons where they exist, and remove the
respective PNG artefacts generated from the SVG files from the
repository.
Signed-off-by: Michael Keller <github@ike.ch>
It's possible for the first sensor to start with a pressure
significantly lower than other sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Not really relevant, because it only affects debugging output.
But shows why I dislike weakly typed, non-compiled languages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Improve the build instructions for Android. Provide a complete script
for building in a re-usable container.
Also changed the Android packaging README to markdown.
Signed-off-by: Michael Keller <github@ike.ch>
When editing a dive site in the 'Dive sites' view, add a context menu
entry to allow mergeing of the displayed dive site into the dive site
seleted in the 'Near dive sites' list.
This merge has the opposite direction of the existing 'Merge into
current site' function, which can simplify the workflow when maintaining
a large number of dive sites, as the facilities to sort dive sites in
the 'Dive sites' view does not have a way to sort by location or
proximity.
Signed-off-by: Michael Keller <github@ike.ch>
Change the output formato for the Export / 'CSV summary dive details'
from TSV to CSV, to make it consistent with the menu item name, and with
the other 'CSV' export function.
This was changed to TSV by @mturkia in
6c82578540,
but I could not find any discussion as to why.
Also removed replacement of the field separator in any fields, as,
according to the CSV RFC (https://datatracker.ietf.org/doc/html/rfc4180)
this is not required as long as the fields containing separators are
enclosed in quotes, and any quotes within the fields are doubled up.
Tested with a fairly large log file, and importing into Google Sheets is
working fine for the output produced.
Also made capitalisation of the Export menu items consistent.
Signed-off-by: Michael Keller <github@ike.ch>
Fix a bug introduced in 8cd451fc338da275f66b15181894e37621698109 causing
an error to be thrown every time trying to do 'Save to cloud storage'.
Signed-off-by: Michael Keller <github@ike.ch>
This has to be applied to the object, not the pointer to the object.
Fixes a double-free crash introduced in 8cd451f.
Alternatively, we could use std::swap() for C++98 charm and perhaps
better readability for people unfamiliar with C++11. Nowadays,
std::move() is more idiomatic though. Shrug.
Reported-by: Michael Keller <github@ike.ch>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add an option for users to sync the dive computer time with the PC time
every time dives are downloaded.
Obviously this will only work on dive computers that have time
synchronisation support in libdivecomputer, for other computers a notice
is logged.
The selection for this option is persisted as a preference.
Signed-off-by: Michael Keller <github@ike.ch>
There was this completely weird loop that the planner-widget would
call the planner-model to get the current rebreather mode, which
would then access the dive in the planner widget. Just keep those
things in the planner widgets.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only user of the DivePlannerPointsModel and the
GasSelectionModel is the planner. Let's keep these models
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The gas and dive-type models were repopulated in the
diveplanner model. The former are used in the planner.
However, the latter is also used outside of the planner,
when editing non-planned dives. Thus the former shouldn't
be repopulated by the latter, but by the code that needs
it.
Side note: repopulating the dive-type model seems to
make no sense whatsoever since the values never change,
but let's keep it for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To phase out this global variable, avoid access of displayed_dive
in the printing code. This is used when printing a plan. Instead,
when in plan-mode, pass the planned dive to the printing code
as a single dive to be printed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mode was accessed via the global `displayed_dive`. In an effort
to remove globals, access it via the DivePlannerPointsModel instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-code uses owning pointers based on std::unique_ptr to
manage lifetime of C-objects. Since these are generally useful,
move them from the undo-code to the core-code. In fact, this
eliminates one instance of code duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
displayed_dive used to contain the currently displayed (as in
shown on the profile) dive. However, now it is only a "scratch"
dive used by the planner and initialized every time the planner
is started. There is no point in clearing this dive when clearing
the dive data. In fact, the dive should probably be cleared when
the planner finishes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current dc global makes no sense on mobile. Therefore,
move the logic of the currently displayed dive computer
to the profile widget and remove the dc_number global
variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't access the global current_dc, but pass it to the sensor and
tank-use delegates, when the current dive or dive computer changes.
The same pattern is already realized for the tank and weight models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-equipment tab has a number of "delegates" for editing
tanks sizes, etc. Instead of allocating them, make them subobjects.
The main point here is that, in an upcoming commit, the sensor
delegate will have to be accessed to change the current dive computer.
So far it didn't have a name and therefore was hard to access.
By making it a subobject it also gets a name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
An attempt at limitting accesses to the globals current_dive and
dc_number. These globals do not make sense on mobile.
The parent widget of the tab-widgets remembers the currently
displayer dive and dive computer and the individual widgets
access these values from there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make it possible for the individual tab-widgets to access the
parent widget. In principle this could have been done by
downcasting the pointer returned by parent(), but this makes
it explicit.
The goal here is to store information on the selection,
current dive, etc. without repeating it in every subwidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On selection change, pass down selection (including current
dive and dc) to the tab widgets. Ultimately, this should
remove access to global variables. A number of new accesses
are marked as TODO. They shall be removed in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signals/slot names for dive selection changes were a mess.
Unify on divesSelected(). Firstly, selectionChanged() is a Qt
thing. Secondly, it is consistent with tripSelected().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was very weird: a setSelection() call was always followed
by a selectionChanged() call, though sometimes in convoluted
ways. Notably, the formed was called by the DiveListView, the
lattern then by the MainWindow.
Let's just merge these two functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView user actions (select-all, key-press,
mouse-release) were intercepted to send the selection-changed
signal if the selection changed.
However, with the recent cleanups, this can be done
directly from selectionChanged(), since in all cases (at
least the ones I tested), the part of the function that
is responsible for manual selection changes is called
only once.
This avoids quite some complex code flow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When manually selecting a trip, the selectionChanged()
virtual function was manually selecting the dives of the
trip and thus ultimately recurse into itself.
So far this seems to work OK, but better to avoid this
recursion by setting the programmaticalSelectionChange
flag.
I'd like to send the selection-changed signal directly
from selectionChanged() and this recursion would lead
to double signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The trip selection code was an awkward layering violation.
Whereas dive selections due to dive undo-commands trickled
down via DiveTripModel-->MultiFilterSortModel-->DiveListView,
for trip editing, the DiveListView directly intercepted the
TripEdited signal.
Instead, mimic the dive-selection code. This is a bit longer
but more consistent and logical. The undo/redo of trip changes
is now also a "programmatical" change of the selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After sending a selection-change signal, there follows a current
dive changed signal. Combine these two into a single signal, since
usually the current dive is changed when the selection is changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global dc_number from the
DivePlannerPointsModel and the CylinderModel, pass them
in the respective initialization functions.
The dc_number global might not make sense on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were not optimal, because they would recalculate the current
dive and divecomputers for every invocation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
delete_single_dive() is one of those remnants from before the
undo-code. Now it is only called in two contexts:
1) When clearing the whole dive log.
2) When importing dives from the cloud on mobile.
In the first case, the selection is cleared before deleting
the dives.
In the second case, let's just do the same.
Thus, we can remove the last call to the deselect_dive()
function that does some complex calculations concerning
the current dive and divecomputer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Each of these calls recalculates the current dive and divecomputer.
Instead, collect the dives to be selected/deselected and (de)select
them at once.
This needs some code refactoring in the core, because we need a
function that
1) doesn't send a signal by itself.
2) doesn't clear the trip-selection.
This contains some reorganization of the selection functions
signatures: The filter code is the only caller that keeps the
selected dive and the only caller that cares about whether the
current dive changed. So let only the function that keeps the
selected dive return whether the current dive changed.
It's all very fragile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For each selected dive that is hidden by the filter,
unselect_dive() was called, which led to a recalculation
of the current dive and divecomputer.
Instead, collect all deselected dives and deselect them
at the end. Thus, these calculations are performed
only once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This removes a constant describing the length of the array.
The enumerated_range code had to be adapted, because the
interaction of C-type arrays with the C++ typesystem is mad.
With C-type arrays, one has to pass a reference to std::declval.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser API was very annoying, as a number of tables
to-be-filled were passed in as pointers. The goal of this
commit is to collect all these tables in a single struct.
This should make it (more or less) clear what is actually
written into the divelog files.
Moreover, it should now be rather easy to search for
instances, where the global logfile is accessed (and it
turns out that there are many!).
The divelog struct does not contain the tables as substructs,
but only collects pointers. The idea is that the "divelog.h"
file can be included without all the other files describing
the numerous tables.
To make it easier to use from C++ parts of the code, the
struct implements a constructor and a destructor. Sadly,
we can't use smart pointers, since the pointers are accessed
from C code. Therfore the constructor and destructor are
quite complex.
The whole commit is large, but was mostly an automatic
conversion.
One oddity of note: the divelog structure also contains
the "autogroup" flag, since that is saved in the divelog.
This actually fixes a bug: Before, when importing dives
from a different log, the autogroup flag was overwritten.
This was probably not intended and does not happen anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Strangely enough, half of the infrastructure was
already there, it just wasn't hooked up to a UI
element
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Some DCs only report water type, without salinity level. Subsurface
fixes most of these cases using default levels, but when the type of water
is Sea/Salt, this fix was not saved.
This causes a bit confusion, mainly if the user defines own salinity level.
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Fix a bug causing the bluetooth address not being used when downloading
from a 'remembered' dive computer if the device selection is populated.
This specifically excludes MacOS, as 'remembering' bluetooth connections
does not seem to be working there as per
https://github.com/subsurface/subsurface/pull/2158#issuecomment-508933672.
I am not super sure why we are _not_ trying to use the 'remembered'
device if the device selection is populated (`ui.device->currentIndex()
== -1`) - maybe this should be clarified in a comment?
Signed-off-by: Michael Keller <github@ike.ch>
Since the only caller was C++ code, this can be done in
C++ code, which removes memory-management headaches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make the time edit respect the configured time format. Also make the
date and time format change when the preferences are changed.
Fixes#3849.
Signed-off-by: Michael Keller <github@ike.ch>
Add titles for the individual topics covered in CONTRIBUTING.md. One
advantage of this is that it makes it possible to link to individual
topics when providing feedback on pull requests.
Signed-off-by: Michael Keller <github@ike.ch>
Format keywords, classes, string examples, etc. in prose of
CODINGSTYLE.md using `inline formatting` with single backticks.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Similarly to commit 062533d0a (CONTRIBUTING.md: use dashes instead of
hyphens, 2023-01-14), replace hyphens in prose of CODINGSTYLE.md with
dashes to make the rendered Markdown a bit nicer.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
The `for` loop in the sample iterates over `serviceUuids`, but the only
other statement in the sample assigns variable named `l`. Fix the name
of the variable in the assignment to be the same as in the loop.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Without an blank line, the pseudo-headers of list items are not
separated from the next paragraph. An example is rendered as:
* variable declarations In C code we really ...
instead of intended:
* variable declarations
In C code we really ...
Add missing blank lines between paragraphs inside list items and in
between list items to fix the intended rendering.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Samples of code in CODINGSTYLE.md are wrapped in triple-backticks to
render them as blocks of code. For code blocks that are indented within
a list item, Markdown renderer of GitHub treats the leading tab as if it
was four spaces. Rendered code blocks are formatted in a way that
contradicts the code style written down in prose.
Replace leading tabs in indentation with spaces in blocks of sample code
to render them correctly in Markdown lists.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
In order to support development of the open source firmware of the
OSTC4.
Requires changes in libdivecomputer.
Signed-off-by: Michael Keller <github@ike.ch>
Fix a bug causing the wrong units (m) to be shown on the Dive site
management view if imperial units are as the system default.
Signed-off-by: Michael Keller <github@ike.ch>
Disable the 'search dive computer' ([...]]) button in the 'Import from
dive computer' window if searching is not supported by the currently
selected vendor.
Signed-off-by: Michael Keller <github@ike.ch>
Fixes a bug reported in
https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E:
When planning a CCR dive with multiple segments, the textual dive plan
was showing a non-existent gas change with bogus data. The first part
of the fix is uncluttering of the message printed: Since this change is
_after_ the current diveplanpoint the data needs to come from `nextdp`
and not `dp`. The second part is that the message is not printed any
more if the current and the following segments have been manually added:
According to comments in the code the change should only be printed on
the segment _before_ the change if this segment is an ascent segment
that is followed by a manually entered segment.
Signed-off-by: Michael Keller <github@ike.ch>
Fix a bug that results in dive plans outside of the configured risk
profile being produced when planning a CCR dive with the first segment
set to open circuit.
`d->dc.divemode` is already set in `setRebreatherMode`, which is
sufficient, and congruent with the setting of other dive parameters,
like `diveplan.gflow`.
Signed-off-by: Michael Keller <github@ike.ch>
Merge upstream updates from Jef Driesen:
- Deepblu Cosmiq+ support has been merged upstream
- Oceans S1 support has been merged upstream
- Various new models supported: Cressi Donatello, Scubapro G2 TEK, new
Excursion v6+ firmware.
- misc core changes, most notably supporting a new annoying specialized
binary format for decomode, because Jef still can't deal with
strings.
- lots of small details
(all the work done by Linus - I'm just adding this to Surface)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Qt-containers, this might be a small pessimization, because
it might lead to a deep copy. This can be "fixed" by
for (const Type &item: qAsConst(container))
But frankly, I don't care. Ultimately it is probably best to
replace the Qt containers by standard containers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The event names were registered in add_event(). However,
the undo system did not use that function, but add_event_to_dc(),
which takes an already allocated event.
That gave the following unfortunate situation:
Load a log without setpoint changes.
Add a setpoint change.
The setpoint change event type now was not registered and
therefore couldn't be hidden.
Admittedly, a subtle bug, but still a bug. Fix by registering
event names on event creation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The eventname handling code was splattered all over the place.
Collect it in a single source file and use C++ idioms to avoid
nasty memory management. Provide a C-only interface, however.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Changed the way dive data points for OC cylinders to be added to the
dive plan are created in `createTemporaryPlan()` in
`diveplannermodel.cpp`. This now uses `plan_add_segment()` like all
other places where dive data points are added, in particular the planner
tests.
This also allowed for `create_dp()` to be made static.
Signed-off-by: Michael Keller <github@ike.ch>
Fixes a bug reported in
https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E:
When planning a CCR dive with OC bailout, the diluent gas may be chosen
as the first OC bailout gas, despite being set up with a use type of
'diluent', and likely not being available for open circuit breathing.
`best_first_ascend_cylinder` is now initialised to an invalid value
(instead of the first cylinder, which may or may not be a diluent
cylinder), and its subsequent use is guarded by a validity check.
Signed-off-by: Michael Keller <github@ike.ch>
3629a87 changed the handling of cylinders in multi-dives edit.
Not only should the cylinders be the "same", but also at the
same position. The code did not check whether the edited dives
even had that many cylinders, leading to a null-pointer
dereference.
Check whether the cylinder exists before comparing it.
Fixes#3578.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change the values supplied in the warning to be fractions. This is what
is actually reported by libdivecomputer. The currently used thousandths
are hard to interpret for users, as they are only used internally in
Subsurface.
Signed-off-by: Michael Keller <github@ike.ch>
Fix bug introduced in #3576: On CCR dives cylinders listed as open
circuit bailout by the dive computer need to be set to `OC_GAS`.
Signed-off-by: Michael Keller <github@ike.ch>
These were two weird and clearly wrong constructs of the
type "if (iter && iter + 1)", where iter is a pointer. This
is always true at best and undefined at worst. Another
instance was removed in 096de0efd01e.
The original code probably wanted to check whether the
found character was the last character in the string.
But that likewise seems to make no particular sense in
this context. Therefore, just remove the second part of
the boolean expression.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use the drop down for editing the tank use in the gas list in both the
equipment tab and the dive planner.
The tank use column is now available in the equipment tab for all dives
and not just CCR dives, as 'not used' is a valid entry in both cases.
However, if the current dive is an OC dive, only 'OC-gas' and 'not used' are
shown.
There still seems to be a problem that in some cases, when opening the
planner after selecting an existing CCR dive the drop down in the
planner does not list CCR gas uses - for some reason `displayed_dive`
does not seem to be updated correctly on opening of the planner. But I have not been able to
reproduce this consistently, and changing 'Dive mode' fixes this.
Signed-off-by: Michael Keller <github@ike.ch>
Clarified the message that is shown when a newer dive computer firmware
version is available, informing the user that
using an older firmware version may result in problems when using
Subsurface, as discussed in #3568.
This is currently only supported for Heinrichs-Weikamp dive computers.
Signed-off-by: Michael Keller <github@ike.ch>
Small refactoring to use `get_gasmix_at_time` from `core` in `TankItem`
to find the first gasmix used during a dive.
Signed-off-by: Michael Keller <github@ike.ch>
The Heinrichs Weikamp OSTC4 introduced an additional
'Cave' brightness level that is dimmer than all existing ones.
Signed-off-by: Michael Keller <github@ike.ch>
Instead of adding all gases read from a dive computer as part of a dive
log as 'OC-gas', add gases as 'diluent' if the dive has a dive mode of
'CCR'. This creates consistency with the ppO2 for CCR dives being
tracked as sensor readings or a fixed setpoint, and not as the ppO2 of
the current gas ad depth.
A follow up question from this is whether gas use in the cylinders list
on the Equipment tab should be user editable. This seems to be
inconsistent at the moment, with gas constituent percentages downloaded
from the dive computer being editable, but gas use not.
Signed-off-by: Michael Keller <github@ike.ch>
`device_data_t data` in DeviceDetails has never been populated since it was first
added, and consequently is not used. This is confusing, especially as certain
fields inside `device_data_t` have been added directly to `DeviceDetails` in the meantime (e.g. `firmwareVersion`).
Separated from #3568 as per
https://github.com/subsurface/subsurface/pull/3568#pullrequestreview-1274995287.
Signed-off-by: Michael Keller <github@ike.ch>
When exiting the loop, stopidx is 0, which means that if there
are no stoplevels, stoplevels[stopidx + 1] generates an
out-of-bounds access. Instead, suppose a stop at 3m or 10ft.
Suggested-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For dives with many samples (i.e. logged dives), samples are merged.
I'm not exactly sure how this code works, but it does an
out-of-bound access in some cases. Avoid that by a simple
check.
That said, I wonder if this downsampling is a good idea. A user
reports that they have logged dives marked as manually added dives.
We now load them into edit mode, which means a significant loss
of information.
Perhaps we should consider dives with more than 100 samples as
non-manual dives?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users report that the ShiftTimesDialog does not work on Mac and
Windows. Apparently, get_first_selected_dive returns NULL, which
should not be possible because the dialog is only created when
dives are selected. Very omninous.
Get the selected dives in the caller and pass them down. This
bug at least should not happen anylonger. Perhaps now the
dialog does not show at all, but that will narrow down the
root cause of the problem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
File `CodingStyle` was renamed to `CodingStyle.md` in 0ceb7e01d (Convert
CodingStyle file to Markdown notations, 2018-04-14) and then to
`CODINGSTYLE.md` in 4ef1e9cb2 (documentation: coding style.,
2019-12-25). However, a link to the file in `CONTRIBUTING.md` wasn't
updated.
Fix the dead link to the coding style guidelines in `CONTRIBUTING.md`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Git's own documentation consistency capitalizes the word "Git" in prose.
Follow its example and capitalize the word "Git" in prose of file
`CONTRIBUTING.md`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Markdown doesn't have a syntax for image captions. While we could use
table syntax (an extension in GitHub's flavor of Markdown) to align the
caption more clearly with the image, it wouldn't be very readable in
plain text and Markdown renderers that don't have such an extension.
Reduce confusion of readers by makimg the caption of the gitk screenshot
formatted differently than the surrounding paragraphs. Use emphasis
syntax for that.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Replace hard-line break (rendered in HTML as a `<br />` tag) between two
paragraphs in `CONTRIBUTING.md` with an paragraph break (blank line) for
consistency with the rest of the document.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
List of code areas in `CONTRIBUTING.md` immediately follows the previous
line. While GitHub's Markdown parser doesn't mind, some Markdown
parsers don't consider it a list. Add a blank line between the list and
the preceding paragraph to ensure that the list is rendered correctly in
more Markdown renderers.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Wrap filenames in paragraphs in `CONTRIBUTING.md` in backticks to render
them in monospace font. Fix an accidental double space before the
reference to `CHANGELOG.md`, while we're here.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Replace double quotes around `git commit --amend` command example in
`CONTRIBUTING.md` with single backticks to format it in monospace font.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Use Markdown block syntax for the example of a commit message instead of
hard-line breaks with double spaces at the end. Such formatting
separates it from the other parts of the text in `CONTRIBUTING.md` and
makes the wrapping at 74 characters easier to understand with monospace
font. Do the same to the examples of `CHANGELOG.md` entries.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Replace combination of Markdown inline code syntax (single backticks)
and its hard-line break syntax (double space at end of the line) in file
`CONTRIBUTING.md` with block syntax (four-spaces-wide indentation) and
paragraph breaks (empty lines) for examples of commands to run to make
them look nicer and easier to read in plain text. Add a missing colon
before the `format-patch` example, while we're here.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Make `CONTRIBUTING.md` look a tiny bit nicer when rendered by replacing
double hyphens with en-dashes.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Update to match Xcode command-line-tools SDKs from 10.X to 16.X
Signed-off-by: Doug Junkins <douglas.junkins@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason (use of OpenGL?) with Qt6 these modes fail for me.
Needless to say, I consider this API change a very unfriendly
behavior.
Replace these modes by DrawTriangleStrip and DrawLineStrip.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This include prevented the statistics from loading for me on Qt6.
And it appears to be unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code that calculates the bounds of the value axis was broken
when all items had the same value. In that case, increase the shown
range explicitly. It doesn't really matter how much the range
is increased, because all items will be at the center of the graph.
Also, don't overwrite the "decimal" value of the class. That was
just weird.
Fixes#3544.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When loading a git repository, dive sites where loaded into the
global dive site table, not the local table. Apparently, nobody
ever tried to import a git repository into an existing divelog
(as opposed to opening it in the application). Because that would
have probably given funky results.
Remove this access of a global variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
-build-with-qt6 did not work for me, because the flag is
ignored when selecting the qmake executable. It would find
the system-wide qmake executable, which is Qt5 and then
decide to build with Qt5.
When the flag is set, try to search for a Qt6 version of
qmake first. On Ubuntu based distros this seems to be
qmake6
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When collecting the data for the infobox, we have
already computed the current partial pressures of the
breathing gas taking into accoutn the divemode. Use
those rather than fractions (which for CCR mode are
those of diluent) to compute the gas density.
Reported-by: Pietro Tranquillini <p.tranquillini@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
- uwatec smart: allow bigger BLE packets
- Garmin: attempt to parse big endian FIT files from the Garmin website
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of these declared non existing functions or pointers.
One [get_gas_idx()] was only used in one source file and
doesn't have to be globally accessible
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Search the index of an item in a container. Compare by
equality or a lambda. The lack of these have annoyed me for a
long time. Return the index of the first found element or
-1 if no element found.
Currently, only supports random-access operators. Might be
trivially changed for forward iterators.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching from "empty mode" (i.e. the subsurface logo is shown,
because no dive is selected), the profile is first shown by switching
to the appropriate tab and then plotted. However, the showing might
lead to a resize event and then to a crash with owing to stale dive
data. Therefore, reverse that.
Note that I never could reproduce that.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the profile was to small, it would switch into empty state
and clear the plot info.
On resize events, the plot info is not recalculated.
This means that when making the profile extremely small and
then bigger, nothing is shown.
This may also happen on startup. The profile is rendered into
a 0x0 widget and then gets a resize event.
Therefore, remember when the profile is empty and force a
recalculation of the plot info.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The chances that their are still users of the old thumbnail
format (i.e. all thumbnails saved in the hash file) are basically
0. If there are they will just get their thumbnails rebuilt
when opening the individual dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were a number of classical "for (i = 0; i < size; ++i)"
loops. Replace them either by plain range based loops if the index
is not used or by enumerated_range() loops.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This source file was looping over descriptors in a classical
"for (int i = 0; i < size; ++i)" loop.
However, the index is not really used, except for fetching the
actual elements.
Replace by range-based for loops. This prevents the potential
error of using the wrong size.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the printing-template code, we loop through a vector and
then determine the index of the current element by searching
the vector. This irks me.
Since looping over a collection with an index is a rather
common theme, implement an enumerating iterator that can
be used as in:
for (auto [idx, item]: enumerated_range(v)) {
...
}
For now, use it for the above vexing case. Convert other
iterations of this theme later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The moveInVector() function was defined in qthelper.h, even
though it has nothing to do with Qt. Therefore, move it into
its own header.
Morover, since it is a very low-level function, use snake_case.
And rename it to move_in_range(), because it does not only
work on vectors, but any range with random-access iterators.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For reasons of symmetry (there is a is_manually_added_dc()
function), create a make_manually_added_dc() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This causes UI confusion. Notably we go into edit mode and
reduce the number of samples, leading to loss of information.
If someone really manually adds a dive with more than 50
samples, they should still be able to explicitly open the
dive in the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The calculation of the range was broken, it resulted in
a to-value smaller than the from-value, owing to a
sign-mismatch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We must add one more entries than there are days, because the
entries describe the values between histograms.
The root cause of the problem here is that a histogram axis
is misused for a continuous day-axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Scatter items of selected dives were shown in blue when
changing to scatter mode. They should be yellow from the
start, not only when hovering over them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This got broken in commit 7417f865cd ("cleanup: un-singletonize
ShiftTimesDialog") and no one ever noticed.
We need to intitialize the when variable and set up the initial texts in
order for the time shift dialog to show the correct information. Doing
this in the ButtonClicked member (right before the dialog is destroyed)
makes absolutely no sense.
Fixes#3535
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rarely gets seen / looked at, but it can help make it easier
to understand what a user was doing when trying to restore dives
that were inadvertantly deleted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Embarrassingly, commit 8c644547fb ("mobile: fix reading of cache dir")
dropped updates to libdivecomputer which went unnoticed for quite a
while. This brings us back to the correct SHA.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive-site editing can be reached from two states: from the
dive view and the dive list view. It always jumped back to
the dive view.
Therefore, remember the state. Use a stack-like structure, so
that the feature can be used for the dive-site view as well.
This is a bit inconsistent, because for example the statistics
view does not remember the previous state and allows a direct
jump to a different state. That should be fixed at some point.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to be one of the tab-widgets, which was illogical
and caused confusion. Notably, erroneously clicking on the
tab header led to a reset of the dive selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fixup_dc_sample_sensors() would make sure that any pressure sensor
indexes were in range of the cylinders by just clearing the pressure
data if the sensor index was larger than the number of cylinders in the
dive.
That certainly makes the sensor index data consistent, but at the cost
of just dropping the sensor data entirely.
Dirk had some cases of odd sensor data (probably because of an older
version of subsurface, but possibly due to removing cylinders manually
or because of oddities with the downloader for the Atomic Aquatics
Cobalt dive computer he used), and when re-saving the dive, the pressure
data would magically just get removed due to this.
So rewrite the sensor data fixup to strive very hard to avoid throwing
pressure sensor data away. The simplest way to do that is to just add
the required number of cylinders, and then people can fix up their dives
manually by remapping the sensor data.
This whole "we clear the pressure data" was at least partly hidden by
two things:
(1) in the git save format, we don't rewrite dives unless you've
changed the dive some way, so old dives stay around with old data
in the save until explicitly changed.
(2) if you had multiple dive computers, and one dive computer does not
have any pressure data but another one does, our profile will use
that "other" dive computer pressure data (because often times you
might have only one dive computer that is air integrated, but you
still want to see the tank pressure when you look at other dive
computers - or you have one dive computer give pressure data for
your deco bottle, and another for your travel gas etc).
So those two facts hid the reality that we had actually cleared the tank
sensor data for Dirk's dive with the Atomic Aquatics dive computer,
because we'd still see pressure data in the profile, and the git data
would still be the old one.
Until Dirk renumbered his dives, and the data was rewritten.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It returned a 'uint8_t', which clashes pretty badly with NO_SENSOR being
-1, and turned it into 255. That then ended up historically working,
because before commit 0c84f369c35b ("core: use int16_t for sensor-id")
we actually did that everywhere:
#define NO_SENSOR ((uint8_t)-1)
...
uint8_t sensor[MAX_SENSORS];
but that was changed to
#define NO_SENSOR -1
...
int16_t sensor[MAX_SENSORS];
and this helper type became wrong.
Just make it return 'int', avoiding any type narrowing issues.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Owing to bit-rot, the extradata tab was not disabled if no dive
is selected. The reason was that there was an additional tab
(dive-computers) that should not be disabled. However that
tab was removed and now the extradata tab was not disabled.
Fix this, but note that there is another of these 'parasitic'
tabs, that should be removed, namely the dive-site tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile replots if the mode of the currently displayed
dive changed. To do so, it compares the changed dive to
the displayed_dive. However, that is only used for planned
dives since quite some time.
Fix the check and make the replotting work again.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map listens to the reset signal by itself.
This avoids double reload of the map on open/close.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add some additional info on getting the
FTDI drvier to recognize dive computers on
Raspberry Pi OS.
Signed-off-by: Captain Junk <captainjunk@gmail.com>
Render a warning sign in front of the event string
in the infobox. This is done in rich text.
Note: This shows the warning sign for all events,
not just warnings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When zoomed in, the profile position was moved by hovering with
the mouse. What a horrible user experience. This is especially
useless if we want to implement an interactive profile on mobile.
Instead, let the user start the panning with a mouse click. The
code is somewhat nasty, because the position is given as a
real in the [0,1] range, which represents all possible positions
from completely to the left to completely to the right.
This commit also removes the restriction that the planner handles
can only be moved when fully zoomed out. It is not completely
clear what the implications are. Let's see.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A QVariant was initialized but never used.
While doing so, remove construct/assign pairs of a number of
QStrings. Directly construct the QStrings with the desired
values.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The get_minutes() function formats a time as m:ss
and returns a static C-string. Since all callers are
C++ anyway and transform directly into QString, let us
move this to the other string formatting function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
The SSRF_INFO() macro is widely used, and there's a lot of confusion
about whether the newline at the end should be done by the SSRF_INFO or
be in the format string passed to it. End result: we end up doing both,
and there are empty lines in the output as a result.
Clean this up by just using our existing 'strip_mb()' to strip any
whitespace at the end of the generated string, and then adding one final
newline when logging it.
Also, make sure to log our 'report_error()' messages, which apparently
only used to be showin in the red error bar on the display.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using the save file dialog (which creates a horrendous user
experience - and isn't even supported on Android), simply allow the user
to email the file in question to a recipient of their choice, e.g.,
themselves.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will allow the user of the mobile app to export dive and dive site
data from their mobile device without using the Subsurface cloud.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The export functionality is horridly poorly implemented, and the UDDF export
isn't actually functional on mobile. And why would we support this in the first
place? That's not a reasonable expectation for the mobile app.
So let's just completely remove that and good riddance.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No reason to keep this as a macro - a function is easier to
read, type safe and easier to debug. Moreover, give it the
more appropriate name "nearly_equal()". After all, it precisely
does NOT check floating points for equality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The FP_IS_SAME macro uses a relative precision to compare
floating points. This fails when comparing to 0. Therefore,
use an absolute precision in this case. Implement as an
inline function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have two different API endpoints. supportEmail() which adds the
default subject, recipient, and message body, and the generic
shareViaEmail() which takes all of these as arguments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was added for Android a while ago, but now this works on iOS as well which
is a very welcome addition for the recipient of these support emails (i.e. me).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes it marginally easier to deal with debug builds and release builds in
parallel. The quick builds work most of the time, but not always.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For Ratio dive computers we can't tell by the Bluetooth name which model it is.
There are BT only models and BLE only models. The failure case here was a user
on iOS (BLE only) with a BLE only dive computer which we didn't recognize
because previously we returned a BT only device (which isn't supported on an
iPhone), and the lookup won't return a valid descriptor if the transport needed
isn't available.
These days BLE is far more common, so return a BLE enabled name by default, but
try a BT only name just in case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the flag to exclude . and .. breaks this functionality.
It works just fine without that flag, so let's just remove it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Other overridden functions of this class are marked as well,
so let's do it for this function for consistency reasons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When there is no map support, selection of dive sites is suppressed.
There is no point in calculating the selected dive sites in this case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last caller of find_cylinder_index() was removed in
3629a87fcc. Also remove functions that where only called by
this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a dive has both real dive computers as well as at
least a planned version (which is just another dive
computer with a special name), only use the data from
real dive computers for aggregate values like maxdepth,
dive time, average depth etc in order not to have
imagined data on the dive list, statistics etc.
Macro-magic-provided-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
One would think that calling free() on a dive structure, as the code
did in some places, would lead to a memory leak.
(Insert rant about C memory management.)
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is stored as uint32_t, so no reason to use the larger time_t.
It appears to be, after all, relative to the dive start.
Coverity was complaining about the down-conversion later in the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the entries in the DiveLocationModel don't have their entries
set as editable, the auto-completion popup turns of composition
if such an item is highlighted (see Qt code in
/src/widgets/itemviews/qabstractitemview.cpp), thus disabling
composition of multi-key characters.
Therefore, set this flag. Seems weird, but what should we do!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is crazy: when view() is called, the dive-site-suggestion
popup (DiveLocationListView) clears its WA_InputMethodEnabled
flag. This makes key composition not work as long as the
popup is open.
Thus, when showing the popup, explicitly set the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds a preference setting in the "Default" settings tab to toggle whether
to display shortened names in the Map.
TODO: instead of using the generic "settingsChanged" signal, it would be much
more efficient to only update items based on the actual setting which was
changed.
Signed-off-by: Michael WERLE <micha@michaelwerle.com>
Only the last component of the Site Name is displayed, otherwise the full
name is displayed. Site Name components are separated using slash (/)
characters.
For example, if the full dive-site name is
"Japan / Izu Peninsula / Atami / Chinsen-Aft" then only "Chinsen-Aft" is
displayed on the Map.
Signed-off-by: Michael WERLE <micha@michaelwerle.com>
In bc3b56a9690, the import of the dive mode was simplified,
by replacing an if-else-if chain by bit manipulations.
However, the bitmask was wrong: 0b00111000 is 0x38 not 0x30,
which means that "odd" dive modes were not recognized as such.
Bug found by coverity.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Attn: horrible hack!
For some reason the completion-popup does not have the
Qt::WA_InputMethodEnabled flag set. Thus, if the popup is open
composition of characters breaks.
Therefore, when starting completion, explicitly set the flag
on the popup.
This is 100% not how this was intended, but seems to work for
now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TagWidgets hook into the textChanged() signal to invoke
the word-completer. However, that signal is also emitted for
composition-keys, making composition impossible if the completer
decides that it should show some entries.
Instead, hook into the inputMethodEvent() function, where one
can test whether a real character was input.
Also, don't hook into cursorPositionChanged(), since that led
to an uncanny cascade of reparse() calls when editing text.
The UI experience is still rough as sometimes the completer
popup steals the focus and hinders further entry.
Also, this doesn't fix the location field, which is its own class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The git save format is designed to be entirely line-based, where all the
dive data is on individual lines that are independent.
That is very much by design, so that you can merge these files
automatically, and not worry about what it does to the context (contrast
this to structured files like JSON or XML, where you have multiple
levels of indentation, and the context of a line matters).
So the parser can just ignore any conflict markers, and parse everything
one line at a time.
Well, almost.
We do have *one* special form of multi-line context, where flowed text
(think things like dive notes) will have one "header line" that starts
the note, and then it can continue for several lines until the final
line that ends the quote.
In such a situation, the dive merging can result in a partially merged
string note, which has the ending line from one dive, and then continues
with more string data from the other dive.
That will confuse our parser mightily, because it will have seen the end
of the string, and parsed the rest of those string comments as garbage lines.
That part in itself is fine - the garbage lines won't pass as any real
data (because they don't start with a proper keyword), but while parsing
that garbage the *next* end of the string will be seen as a start of a
new string.
And *that* then confuses the git parser to think that the line after
that is now part of the string, and so it won't correctly parse the
non-string line that follows.
To give a more concrete example, the git dive data (here indented and
abbreviated) might look like this:
suit "5mm long + 3mm hooded vest"
notes "First boat dive.
Giant-stride entry."
Saw a turtle."
cylinder vol=10.0l description="10.0ℓ" depth=66.019m
where the two notes from the two dives were
notes "First boat dive.
Giant-stride entry"
and
notes "First boat dive.
Saw a turtle."
respectively, and the merged result contained parts of both.
When we parse this, we will parse the 'notes' line as having the string
First boat dive.
Giant-stride entry
which is fine. But then the next line will be that
Saw a turtle."
and now the ending double quote character on that line will be seen as
the beginning of a new string, and the cylinder information on the next
line will then be mixed up. The resulting mess will be ignored, but in
the process the data on the "cylinder" line will basically have been
lost.
There are several ways to deal with this, but this particular fix
depends on the fact that we can recognize stale string continuation
lines: they are either empty (for an empty line), or they start with a
TAB character.
So to solve the problem with the mis-identified end quote, this
recognizes that we're in such a "stale left-over comment line" context,
and will just skip such lines entirely.
That does mean that when you have conflicts in dive note sections due to
having edited the dive concurrently on different machines, you may just
lose some of the edits.
But this way at least you shouldn't lose any other data due to the merge
conflict.
NOTE! We could try to improve on this by instead noticing that a "end of
multi-line string has a continuation entry on the next line", and just
say "ok, that wasn't a real end after all".
But that would be an independent thing anyway - this "ignore stale text
comment lines" logic would be required anyway, in case those stale text
comments ended up somewhere *else* than right after another text line.
So do this more important fix first.
Reported-by: Michael Werle
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In utc_mkdate() we find the interesting statement
val = timestamp /= 60;
which not only calculates timestamp / 60, but also overwrites
timestamp with the new value. However, timestamp is never used
in the remainder of the function, because the whole point is to
switch to 32-bit types. Thus, replace the division-assignment
by a simple division operator to avoid head-scratching.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And the way this gets bundled into an iOS app means that we have to declare
permissions that we don't use because the SDK we use could use them. On some
level I can understand that logic, but in general... this is just dumb.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qt Company apparently didn't feel the need to have the correct
tags in all of the module directories. So this now has to manually
pick the correct SHA. What a pain.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
State requirements for email address and
password format within cloud preferences UI
If email address or password entered in cloud
preferences, raise a warning within a
QMessageBox instead of the less-visible
report_error method
Signed-off-by: Jon Massey <jon.massey@thedatalab.org>
The liter symbol is written as 'ℓ'. To allow searching for
that, normalize unicode strings to their base letter. This
corresponds to the 'compatibility' mode.
We might also think about stripping diacritics.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This should avoid build failures on platforms where we don't know if
QtWebKit will be available or not.
The options for printing and user manual are awkward to work with. This
all needs to be cleaned up at some point. Right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code works ok falling back to just Perdix and Petrel 2, but
it looks confusing to the user to see an incorrect name in the
connection drop down.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This really only matters for my build automation setup, but since I
build from the files in the repo... I have to push this into master.
Otherwise my build processes stall until the builds on the COPR site
finish. Which isn't useful.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's confusing to have the same name refer to two different models.
Unfortunately, that's what Aqualung is doing by simply changing the
model number and serial number, but not the external branding.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of trying to find matching cylinders, trigger on the cylinder
number first and then only edit that n-th cylinder if it matches the one
in the current dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In a sign how few people use these additional properties AND use multiple
dive computers, this took a couple of years to get noticed... but yes, we
do need to merge those properties as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When computing plan variations, deco can get shorter when
staying longer when the last step is actually already at
off gasing depth. FRACTION forces unsiged, so this introduces
a sign aware version of FRACTION that returns a sign character
in addition.
Reported-by: Patrick Naujoks <p.naujoks@me.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This allows having 3m depth grid for metric users.
* All original properties ( named diferently ) were renamed to three_m_based_grid everywhere to be consistent.
* Plus other small changes requested during review.
Signed-off-by: Vlad A. <elf128@gmail.com>
Signed-off-by: Vlad A <elf128@gmail.com>
The extra trailing 'dot' broke the cmake build on Rawhide.
This also tries to give more consistent Summary and Description text for
the Subsurface and Subsurface-test repos on copr.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even on platforms that don't have the new git version, yet.
And using the convoluted way to create an environment variable that should
point to our checked out tree in the GitHub Action. The more obvious ways
have resulted in failed builds for obscure reasons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Seac importer was getting samples based only on dive number,
which was causing samples from different computers but with the
same dive number to become interleaved.
To correct this, the SQL statement was updated to use the
dive_id to query for samples. The table schema uses dive_id
as a primary key, which will enforce uniqueness.
Additionally, deviceid is hashed from the the device_id string.
Reported-by: David Brebera <david.brebera@gmail.com>
Signed-off-by: Jim Wobser <james.wobser@gmail.com>
The calculation of the deco steps shown in the profile
infobox is somewhat independent of the planner. When
set to imperial units, the distance between deco stops
should be 10ft rather than 3m as 15m is only 49ft.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The cylinder_with_sensor_sample() function only tests "do we have a mapping to
this cylinder for this sample". It also needs to test if there are any tank
pressure readings for that cylinder.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While I clearly recall that in the past the couple of cmake modules
that were installed when building the dependencies were found, in my
latest tests on macOS 12 with the latest cmake this seems to fail.
This seems like a cheap quick way to ensure that things behave as
expected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It does seem a bit odd, but the arch command actually doesn't
return a reasonable architecture on macOS. So let's use the
uname -m command to get the right answer that makes this script
work both on an m1 and an Intel Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Arguably every dive should at least have one cylinder, but an imported
dive from divelogs.de might end up without one. Sadly, that breaks
assumptions that we make in the cylinder remapping.
To work around it, force at least on cylinder to be assumed in the merge
code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As some Linux distros start to ship both Qt5 and Qt6, it actually makes more
sense to build only against Qt6 when the user explicitly asks for it. Having it
preferred over Qt5 seems completely wrong in hind sight.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
.. at least if the local repository exists and can be opened.
If the local repo cannot be directly opened, we will still try to sync
with the remote first, but this way the *common* git save situation is
that we save locally before we then try to sync with the remote.
That means that if we have network problems, the save will happen before
we possibly hang due to really really slow networking.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We had various random "free parts of the git info" left-overs from when
we passed down the git repo data ad-hoc. Get rid of it, and replace it
with just doing a 'cleanup_git_info()' that does the final cleanup of it
all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That function name was incomprehensible. What did it check? And what
did the return value mean?
So let's rename it to something that actually describes what it does,
and reverse the meaning of the return value while at it.
So now it's called 'remote_repo_uptodate()', and it returns true if the
remote repository branch has the same value as our 'saved_git_id'.
It's still a bit obscure, but at least within the context of the only
user, the code now makes _more_ sense than it used to:
if (remote_repo_uptodate(fileNamePrt.data(), &info)) {
appendTextToLog("Cloud sync shows local cache was current");
but maybe we could come up with even better semantics and naming, and
make it even clearer.
Requested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently only have one single caller of update_local_repo(), and
instead of that caller checking whether the existing repo is a
directory, just make it open the git repository.
This avoids duplicate error handling and simplifies the code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I couldn't make this to work as a single pass build, so we again do a dual pass
and manually assemble the dylib. This is then copied to a sane spot which
required another attempt to copy it in the CMakeLists.txt - which I added
comments to in order to make sense of the weirdness.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of the old connect syntax used the incorrect signal names weren't
caught at compile time. To switch to the new syntax we had to make two
functions pure virtual in the WebServices class - let's hope I got that right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The create-dmg script changed repo name - let's support either version.
On newer Macs the SDKs are elsewhere - let's look there, too.
Let's be far more flexible when finding SDK versions.
Let's not assume that we are linking against QtWebKit (we're not with Qt6).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a flag to explicitly enable a build against maps, which is
only needed for Qt6 (as we always assume that Qt5 has maps installed).
It also includes a quick fix to fail gracefully if libmtp was already
patched.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is an initial build of the C++ classes that seems to work, but the QML
integration is still missing. Still, progress is being made.
Unfortunately with Qt6 we can't forward declare the MapLocationModel class (one
of the operators needs to be able to determine the size of the class), so we
need to include the header file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Making this simply depend on Qt5 or Qt6 was short-sighted as work on QtLocation
upstream continues. Instead break this out as its own option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just like the rest of the git repo related information, this is already
included in the git_info struct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have this nasty habit of randomly passing down all the different
things that we use to look up the local and remote git repository, and
the information associated with it.
Start collecting the data into a 'struct git_info' instead, so that it
is easier to manage, and easier and more logical to just look up
different parts of the puzzle.
This is a fairly mechanical conversion, but has moved all the basic
information collection to the 'is_git_repository()' function. That
function no longer actually opens the repository (so the 'dry_run'
argument is gone, and instead a successful 'is_git_repository()' is
followed by 'opn_git_repository()' if you actually want the old
non-dry_run semantics.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It appears to send a first sample with a water temperature of 0 C. If the next
sample contains a more likely water temperature, overwrite the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This suddenly started. A couple of build would fail because the git submodule
checkout fails because of directory ownership issues. Hopefully this will fix
it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer tries to be super careful in what it tells us. It only offers a
density value if that is something that the dive computer explicitly supports,
otherwise it just offers back a flag. We need to then update the density value
ourselves.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Genesis React Pro: fix serial number
- OSTC: use deco model instead of dive mode for deco model information
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The undo stack is only relevant to the dives that were loaded at the
time the command was executed. If a file is closed, by specifically
closing it or opening another file, then the undo commands will
reference dives that aren't available anymore. Clearing the undo stack
ensures that we don't crash or accidentally do some undefined
modifications to the currently open file.
Signed-off-by: Michael Andreen <michael@andreen.dev>
dc_number is a global variable indicating the currently displayed
dive on desktop. It makes no sense on mobile, since multiple
profiles can be active at the same time. Therefore, the profile
code should not access this global, but use the dc number that
is passed in.
This removes the last access.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To import media files from the web, increas the size of the
dialog box and allow several URLs separated by newlines.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Way back in time, in HwOS 1.86 a CCR mode was added which automatically
switched between setpoints based on depth.
This entry was never added in our system to configure the dc, and caused
the issue seen in #3304
This adds the Auto SP mode, to the dropdown, thus fixing #3304.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
I forgot to clean up the CHANGELOG file for the previous release, and some of
the commits in this release were missing CHANGELOG entries.
This should make sense now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I didn't pay attention and entered the wrong flavor of Portuguese as the
parent translation. The one for Portugal is complete and should be the
parent, back-filling the one for Brazil where needed.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tweak the Lat/Long coordinate parser to allow coordinates of the form:
12.1049° N, 68.2296° W
The coordinate parser works by tokenizing coordinates one at a time.
Consequently it is invoked twice on user input to get latitude and then
longitude. Normally, after parsing the first coordinate, intervening
characters such as , or ; and any whitespace would be discarded from the
input before parsing the second coordinate. Prior to this patch, if the
coordinate format was in degrees followed by a sign (N is a sign in this
example), the parser would skip the bit of code that fast forwards past
any intervening separators and whitespace (, in this example). This
resulted in coordinates of this form not being accepted, because the
second parse would start with , 68.2296° W and reject this as an invalid
coordinate.
To rectify this, the bit of code that fast forwards past separators and
whitespace has been broken out from the tokenization loop and performed
as a final step after a single coordinate has been completely parsed and
validated. Doing it this way makes it independent of the state of the
tokenizer, so that the fast-forward code will always execute once a
coordinate has been successfully parsed.
I've also centralized the list of allowed separators into its own static
string; this is necessary as part of the patch but should also make
allowing additional separator characters between coordinates trivial in
the future, if needed.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
Many language have country specific differences. We recognize different
flavors of English (US, UK (and South Africa)), German (Germany and
Switzerland), and Portuguese (Brazil and Portugal). For many other
flavors of the languages that we have translations for we have no
support and the way we hard-coded the fallbacks in the past was odd and
meant that in the cases where we do have two flavors, missing strings in
one weren't taken from the other (English as the default language being
the exception).
This tries to do a better job of recognizing some of those parent
languages and loading translators for them, first. Which means if we
then find a translator for the specific language (i.e., de_CH), strings
missing in that translation are next searched in the parent language
(de_DE), before finally providing the source language string (en_US).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the current dive computer doesn't have a sensor for the cylinder then
check if another dive computer has sensor data available and use that
for the plot.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Both for Windows and macOS the installers actually didn't work correctly.
It turns out that the nifty trick (which is the officially documented way of
doing this) for setting up Qt5 OR Qt6 doesn't actually set up all of the
variables correctly - at least not on Windows and macOS.
Instead of trying to figure out why that part is failing, I decided to simply
immediately re-run the find_package for Qt5 if we don't find Qt6.
In the Windows case there was an additional problem: A very subtle typo where a
Qt5 turned into a Qt (which alone would have broken things).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently some people try to manually enter older dives where they don't
have data about the dive time and therefore want to only capture the dive
date.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We would dereference the undoAction before the command infrastructure
was initialized which led to a crash in the mobile app.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the theme to a dark theme, also change the
statistics theme. The code is a mess, because it crashes
when setting the theme right at the beginning. Therefore,
there is a "theme has been set" flag. Also, this directly
accesses the ThemeInterface singleton object. I have no
time to fight QML, sorry.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Global variables are evil. In this case not a problem, since
this is a singleton anyway. However, it is bad style and does
unnecessary thread synchronization.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the various font objects the the StatsTheme structure to enable
different font weights for different themes.
For the dark theme, switch to a bold font, because the thin white
font was barely visible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create the themes only when needed (singleton pattern). If
the themes should do more than colors, such as for example
fonts, it is not clear whether that can be done before main()
runs. By creating the themes on demand, the Qt UI should
be initialized in the constructors of the themes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some of the colors (like the bin colors or the highlight yellow) stay
the same, others are adjusted to fit better with a dark background.
This is far from perfect, but it's ok-ish.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To enable rudimentary theming, collect all colors in a new
theme class. The class has to be passed down to the various
items.
In general the items save a reference to the them in the
constructor. Alternatively, they might also just query
the StatsView everytime they need to access a color.
For now, it's hard the say what is preferred: a reference
per item or a function call per invokation?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were leaking. Instead register them as global objects,
so they will be deleted on exit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a prevailing problem with global QObjects defined as
static global variables. These get destructed after main()
exits, which means that the QApplication object does not
exist anymore. This more often than not leads to crashes.
In a quick search I didn't find a mechanism to register
objects for deletion with QApplication. Therefore, let's
do our own list of global objects that get destructed
before destroying the QApplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As of today, GitHub no longer allows the 'git://' protocol, so we need to
switch the submodule and our other references to cloning git repos to
'https://' instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hirsute is EOL, so we need to move to Impish.
Adding Fedora 35 allows us to do a simple test against Qt 6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Need to save the current dc as a member variable so we can apply redo
and undo to the correct dc later.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Now this one was strange:
The ruler items keep a copy of the plot_info struct. However,
only a shallow copy is made (the actual plot data is not copied).
This means that the data is only valid as long as the source
plot_info is valid. But if that is guaranteed, we simply can
keep a pointer instead of the full object.
I wonder if it wouldn't be better still to keep a pointer to
the profile and query that for the plot info?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only things in display.h were profile related, so the
split between these two files is not comprehensible.
In fact profile.h includes display.h, because it needs the
struct defined therein. Let's just merge these two files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller misused this function to get access to the
current divecomputer. Remove it, since selection of the
current divecomputer is handled by the MainWindow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were only three users of that. For now do it inline, but
we may think about a separate function, which is only available
on desktop.
Moreover, add nullptr-checks, even if they are not strictly
necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile knows which divecomputer it is plotting. No point
in accessing a global variable (which isn't even defined on
mobile).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive was passed as an argument to update_event_name(), but
the divecomputer was derived from the global dc_number variable.
That makes no sense. Therefore, pass the dc_number as argument
and update the only caller (smtk-import).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
split_divecomputer() is passed a dive and a divecomputer number.
However, it accesses the currently visible dc!
This would be a nasty bug if it werent for the fact that it is
called when placing an undo command and there it is passed the
current dive and divecomputer anyway.
Nevertheless, fix this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With all the recent changes, some of the previous assumptions about the scale
of items seem to be no longer appropriate. Now that we are showing the icons in
the profile again on device it's quite obvious that they were way too big -
clearly we don't need the special scaling anymore.
Also implement a suggestion from Berthold to get slightly smaller fonts and
finer structures in the profile on mobile devices. This scaling of the DPR
seems to work well in my tests.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they are available in both mobile and desktop version.
Without this, the icons weren't shown on iOS and Android.
Fixes#3214
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CID 376698 was a false positive, but understandable.
It is very hard for Coverity to realize that current_dive
cannot be null if editedDive is not-null.
By replacing current_dive by originalDive, the alert
should go away, since the latter is not checked for null.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This dive contains logs from two dive computer, Garmin Descent MK2i and
Suunto Vyper Air. These dive computers each has a wireless pressure
transmitter connected to them, attached to different cylinders.
When downloading the dives, both of these pressure sensors get attached
to the first cylinder. This is correct for the Garmin sensor, but not
the Suunto sensor, which should be attached to the second cylinder. The
pressure graph doesn't reflect the measured SAC rate.
To fix this, make sure that the Suunto log is visible and then in the
Equipment tab ensure that the Sensors column is visible. In the field for
the 2nd cylinder it will say "Select one of these cylinders: 0", this
shows that there is a sensor attached to the first cylinder. Change this
text to "0" and press enter, now the sensor will be attached to the 2nd
cylinder and the pressure graph will now show the measured SAC rate for
this cylinder.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previosuly they always used index 0 for the active sensor, use
add_sample_pressure instead.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This file was so confusing: A tabwidget containing a layout
containing a tabwidget. This strange situation is probably
due to moving the multi-dive warning message.
Remove the file, there seems to be nothing of importance
in there. All the UI was moved to the individual tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The UI was updated before storing the dive. This had a nasty
effect: the current dive was shown in the profile and if that
was a manually added dive, the DivePlannerPointsModel was
overwritten. Thus the planned dive couldn't be saved anymore.
There is a comment why the UI switch was done beforehand.
But in my tests, this didn't seem to be valid anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
From a user's perspective, the edit mode is not a different
application mode anymore. Therefore, don't change the background
of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when the profile is in edit mode, the user can't
save, exit, plan a new dive and is requested to save the
current dive. However, this makes no sense anymore, since
the profile always switches to edit mode when showing a
manually added dive.
If the user has any unsaved profile changes, the usual
dirty checks of the undo-system apply.
Only show above behavior when in the planner. There it is
useful because, these are not included in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In ProfileScene::draw(), the divecomputer was calculated
thrice. Remove the two redundant calls.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit mode was hidden in a context-menu. With fine-grained
undo there seems to be no need to explicitly exit edit mode.
Therefore, always switch to edit mode when displaying a
manually added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was always this weird asymmetry that the "maintab" widget
is one of the tabs itself, whereas the additional tabs were
treated as extra-widgets. Turn the first tab into explicit
source files to make the distinction between container and
content clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only calls MainWindow::showProfile(), so simply call
that directly.
Moreover make two "public slots" private member functions,
since these were only called locally.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the user undos/redos the profile should update even
when in edit mode. This is a bit more complicated than
anticipated:
1) We should not do the update when emitting an undo command
from the profile. But we *should* update if it is an undo
command from the maintab (change depth/time).
2) The divepointsplannermodel has to be reset. Side note:
the code is truly abysmal as it sends numerous changed-signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It is confusing when undoing a command and nothing happens
in the UI. Therefore, switch to the corresponding dive when
undoing/redoing a replan or profile edit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two actions were using the same command with a flag
controlling the name of the command, which is shown in
the undo menu.
However, the replanDive does much more (such as changing
the notes) and in the future we may want to be more
fine-grained with respect to profile editing. Therefore,
split these commands into two separate ones.
Moreover, make the editProfile command more flexible.
Pass an enum describing the action instead and also
a counter indicating how many points have been
moved or removed.
Finally, don't consume the input dive in the editProfile
command, because we will want to keep the original dive
while editing the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears that the QML object that is created when assigning the source
to the StatsView in the ui can be garbage collected and therefore
destroyed and re-instantiated without our knowledge. So instead of
trying to keep a pointer around, we end up looking up the object address
when needed.
We still ask the JS code to not garbage collect the object - but that
clearly isn't enough to prevent it from being destroyed when the parent
widget changes.
Without this fix opening the statistics will crash with Qt6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Qt the forward declaration fails as the export to QML for the statistics requires
the MOC code to be able to determine the sizeof(struct dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A member function had a minute name change.
The SceneGraphBackend is now set via a string argument, not a magic constant.
Thankfully that appears to be backwards compatible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QVectorIterator is only available in Qt6 when you explicitly add the
include files.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This no longer compiles when defined in the .ui file. But functionally this
should be the same and it should work on Qt5 and Qt6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked without that include in Qt5, but having it there doesn't hurt,
either, so instead of yet another conditional compile, let's just include it
everywhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the explicit QBluetoothUuid instead of just QUuid and deal with new
constants and signal names.
At least with Qt6 we no longer need the ugly QOverload hack.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStringRef is gone in Qt6 and mostly replaced by QStringView. The one major
difference is that direct comparisons with string literals are no longer
possible.
Thanks to Thiago Macieira for helping me avoid more conditional compilation
here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do want the -Wfloat-conversion warnings where they point out
potential bugs. But they are very distracting when they are triggered by
floating point literals (which the standard defines as double) passed to
a function expecting float arguments.
The fact that Qt6 changes the arguments to all these functions from
double to float is... hard to explain, but it is what it is. With these
changes, for the majority of cases we create inlined helpers that
conditionally compile to do the right thing. And in a handful of other
cases we simply cast to float (and accept that on Qt5 this then gets
cast back to double... for none of these cases the potential loss in
precision makes any difference, anyway - which likely is why the Qt
community made the decision to change the type of the arguments in the
first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has bugged me forever. The existing file creates a warning on every single
compiler invocation. I really need to figure out if I can get this fixed
upstream. But while I'm at it, I submitted it here to make it easier to spot
warnings in the build output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These no longer compile with Qt6 - but they are already duplicated in C++ code,
anyway. So we can simply remove them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we are building our own version of libusb, let's build a current one
(because current libmtp relies on that).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was confusing - the file in packaging macos hasn't been used since we
switched to building with cmake something like seven years ago.
Also add missing keys to the actual Info.plist skeleton.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add additional exported values gasO2, gasHe and gasN2 to be available to the
print template.
Also add these to the user manual as well as document some other missing
variables like surge and chill.
Finally, remove references to Grantlee. While the print template still uses the
syntax that we inherited from Grantlee, we aren't actually using Grantlee
anymore.
Reported-by: Rahul Swaminathan <rahul.swaminathan@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding additional exported value meandepth to be available in the print
template language.
A possible use of this would be
<td class="fieldTitle">
<h1> Max / mean depth </h1>
</td>
<td class="fieldData">
<p> {{ dive.depth }} / {{ dive.meandepth }} </p>
</td>
Reported-by: Rahul Swaminathan <rahul.swaminathan@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the CMAKE_PREFIX_PATH is a multi element path the old code failed
in very predictable ways. So instead simply fall back on the PATH to
find qmake.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons I don't understand, the device pixel ratio was taken into account
twice. And as a result the transformation applied to the profile made us show
only the top left part of it - but enlarged (depending on the DPR).
This code fixes that problem by simply forcing the transformation used by the
painter to be the identity matrix. I worry that this could be wrong in some
situations, but for now it seems to fix the problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can have attachment of fairly arbitrary size (which should
be extremely useful for long libdivecomputer logs). This isn't quite as
intuitive as what we did before - the user needs to pick an email app to
share with), but that doesn't seem too bad - and also... this way they
can share logfiles via Dropbox or analyze them in other apps).
If the file share fails for some reason, we fall back to the old method
with passing the combined logs as body to the support message.
As an implementation detail this keeps the correct path for the app log file around
(this was stupidly overwritten before).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The first location we should try is one that allows us to share files.
In theory this should work on every device, but we do have a few
fall-backs, just in case.
This also moves the Android specific include to the top which seems much
more standard.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Android's sandbox makes us jump through hoops in order to share files
with other apps. We need to declare a file provider and use specific
paths where the files are located.
Then we have java code (I couldn't make it work as JNI) that takes the
filenames and creates content:// URIs for them and then hands those off
to a sharing activity that is provided by Android.
This can then be used to create attachments for support emails, or to
share the log files with other apps - both of which will solve the
annoying maximum log file length that we have with using the binder to
add the log file text to the message body.
This also finally replaces the 'compile' directive in build.gradle with
'implementation' - removing a warning that we've had for ages.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a merge mishap creates inconsistent data for a dive in git storage,
where the dive references a dive site that no longer exists, the app
would crash when trying to open the cloud storage.
I don't think a NULL dive could ever happen, but this seems fairly cheap
insurance.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Merge Jef's upstream into the Subsurface branch:
- support for new dive computers: Mares Pick Pro+, Deep Six Excursion,
Crest CR-4, Genesis Centauri and Tusa TC1.
- support freedive mode on Mares Smart Air
- work with Oceanic dive computers regardless of whether they need the
BLE handshake or not
- OSTC updates: support bigger BLE packets in newer versions, fix
setpoint in SCR mode
- Shearwater updates: full dive mode parsing, correct timezone handling
on Teric, support up to four transmitters on newer log versions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When in the planner, ESC should cancel the plan.
However, when the user manipulates the dive-handles in the
profile and presses ESC, first nothing happens, then an obscure
message appears.
The reason is that ESC "shortcuts" are introduced in two places.
To fix this, remove the ESC shortcut in the profile (the planner
widget cancels the plan anyway) and replace all the shortcuts in
the profile with a simple override of the keyPressEvent().
The latter is not strictly necessary, but hopefully avoids further
complications with multiple shortcuts. And the code is easier
to follow too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The formatting of the tooltips describing the columns
was repeated in two functions. Infuriatingly, there were
to minor differences: "Max. CNS" vs. "Max CNS" and
one version understood "Country".
Break that out into a single function to avoid these
inconsistencies and to save a few lines of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User report: when switching focus between windows, the
cursor position gets lost. This is due to a note-edit
command being fired, which then overwrites the notes tab.
To prevent this, don't update the notes field when placing
a command. Moreover, generally don't update the dive
selection when placing a command as that also rewrites all
the values.
Should this be extended to other fields?
Fixes#3365
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In multiple places we have the problem that when an undo command
is executed, the corresponding value-changed signals are emitted,
which in turn updates the UI. This can have nasty UI effects, such
as the cursor position in the notes field being reset.
To avoid this, add a flag that indicates whether a newly placed
command is currently executed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the file system of the Zurich gets full, the only way to continue to
download from it, is to disconnect and reconnect the dive computer (which
resets the FAT file system that it emulates to 'empty').
This solution is rather hacky and weird because it does a hard count down in a
busy loop, but given the narrow use case, this may be acceptable.
This also adds support for the UEMIS_DIVE_OFFSET environment variable that
allows the user to skip dives on the device.
[refactored by Dirk Hohndel]
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Coverity warning: divedatapoint::minimum_gas was not initialized
in DivePlannerPointsModel::addStop.
I don't know the meaning of that member variable and therefore
cannot tell if this was a real issue.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Two pointers were checked against NULL and then both were
dereferenced if at least one was not NULL. Of course, this
should have been an and, not an or expression.
That said, this is a semi-false positive, since both pointers
are set in the constructor and therefore never can be NULL.
In principle, one could remove the whole check. Of course,
realizing that would require a global analysis by Coverity,
which I reckon it doesn't do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This cleans up the script a little and makes it more flexible to add other
output formats; and adds Markdown as one such format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes a block of redundant code that was already broken
out into a helper function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the latest OSTC hardware, the Telit/Stollman bluetooth module has
been replaced with a u-Blox Nina B2 bluetooth module. The BLE
communication protocol remains roughly the same, except for a few minor
differences:
- New UUIDs for services and characteristics
- Only one common characteristic for Rx and Tx
- Credit based flow control is optional
- Credit value of 255 corresponds to a disconnect
[Dirk Hohndel: small edit to a comment]
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The signature of draw() was changed to include "keepPlotData"
as an optimization.
The caller in draw() was not changed and now the plot data
is not recalculated, which means no plot data at all in
prints and exports.
The various boolean parameters should be replaced by flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a40b40a the cylinder-hiding functionality was changed,
which made it necessary to keep track of the number of
cylinders. Ironically, that code was removed previously,
as it was redundant. The count was not readded to the
functions called by the planner, making editing of cylinders
in the planner impossible.
I wonder more and more if the models for planner and the
equipment tab should be changed. They are too different.
Fixes#3375
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic has just been completely broken when implementing
zooming.
Fixes#3376
Reported-by: Anton Lundin glance@acc.umu.se
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Restore the original standard gravity factor for Uwatec/Scubapro dive computers
- Garmin: Fix gas change event parsing
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This GitHub Action started failing. Groovy was EOL'ed six months ago and
downloads from the Ubuntu servers of Groovy components are no longer
supported.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Builds were failing because gradle tried to download libraries from
bintray. JCenter is shutting down in a few weeks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a user request: Sort bar charts by height of the bars.
Obviously, this can only work for categorical charts, not for
histograms.
The UI is a break from the old concept: the sorting is chosen
based on the chart, whereas for the rest of the features, the
viable charts are presented based on the binning, etc.
I found it confusing to have the possible charts be selected
based on sorting. I.e. if a non-bin sort mode is selected,
the histogram charts disappear. On the flip side, this would
be more consistent. We can change it later.
For value-based bar charts, there are three sort modes: by
bin, by count (i.e. number of dives in that bar) and by
value (i.e. length of the bar). This hopefully satisfies all
needs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In TestUnitConversion we used casts instead of the more common suffix
designations to indicate the type of those integer constants.
Worse, in commit efab955d85 ("cleanup: make feet_to_mm signed") the
return type of feet_to_mm() changed, but the value it is compared to
wasn't adjusted in the test which caused some builds with more
aggressive compiler flags to fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depths are pretty much universally stored using signed integers
(e.g. depth_t is signed int). For consistency, make feet_to_mm()
likewise return a signed value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The prev_time variable was defined as unsigned and mixed
with signed variables. gcc rightfully complains with -Wextra.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since these are std::strings anyway, there seems to be no point
in using the C-lib functions. YMMV, but to me that code is
distinctly more easy to parse.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With -Wextra, gcc/g++ complains that compound initialization
of weightsystem_t misses the auto_filled parameter. Add it.
For C++ code we might think about writing a constructor. However,
we use two versions: with and without copied string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In pscr_o2() the result of a double calculation was implicitly
converted to int, which resulted in a gcc warning.
Part of the expression was explicitly converted to int, but then
subtracted from a double.
Instead, do all the calculations in double and cast the final
expression to int. This is probably the prudent thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pure bike-shedding:
The DiveTextItems of the DiveProfileItems were stored as raw
pointers. Instead, store them as unique_ptrs, so that they
don't have to be explicitly deleted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The temperature graph connected directly to whatever was below.
Thus, the lowest temperature often was not clearly seen.
Add a general "bottom border" space to the main chart features
and set it to two pixels for the temperature and zero pixels
for the rest. Might need some fine-tuning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The timestamp labels may change their format on zoom from
"mm" to "mm:ss", depending on the zoom level. Since the
animation kept old labels, this meant that one can end up
with a mix of labels.
Therefore, always reformat the labels. Of course, this
means that the labels switch instantaneously from one format
to the other. This is in conflict with the whole idea of
"smooth" animation. Such a smooth animation could be realized
by adding a "format" flag to the Label structure and keeping
thus fading in/out labels if the format changes. Do we want
that?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This prevented calculation of the pressure data when dragging
planner handles. However, this lead to weird artifacts.
As an alternative, if this turns out to be too slow, we might
disable the plotting of the pressure curves instead.
That said, even on my super-slow fanless laptop, this performs
reasonably.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In planner and edit mode, the cursor position is indicated using
crosshairs. They broke when changing to absolute scaling.
To fix them, remember the plot-area in the profile scene and
draw the crosshairs only inside this area (not on top of axes).
However, limit the position of the horizontal line to the
actual profile (dont paint inside the partial pressure, etc
graphs). The vertical line is painted above those graphs, so
that a timestamp can be related to partial pressure, tissue
loading, etc.
Also, set the z-value of the crosshairs. It was painted
inconsistently above some and below other chart features.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The axes are implemented by a line, which determines the
position. For axes without labels/grids this looks ominous.
For now, make the line invisible. But really, this should
be changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old profile code didn't show the 0m label, because that
was cut off. This was lost when redoing the axis code.
Reimplement this. The code is very ugly: it recognizes the
depth axis by the fact that is the only "inverted" axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old get_maxdepth() function in profile.c was accounting for
two things:
- the partial pressure graphs
- rounding to sane value
Both are now taken care of by the profile itself. This leads to
excessive max-depths. Remove the code from profile.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a shouldn't happen situation, because we always
fake a profile. Let's handle it gracefully anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When hovering over the chart after the chart was cleared,
there were artifacts owing to the stale profile data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
free_plot_info_data() frees the sample and pressure arrays
and accordingly sets the corresponding pointers to NULL.
However, it doesn't clear the element-count and thus leaves
the structure in an inconsistent state.
Clear the whole structure with memset(). I am not a fan of
doing so, but there are existing memset() calls in the
same source file, so let's keep it like that for consistency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All data access is now directly via the plot_info structure
owned by the ProfileScene itself.
Also removes DivePercentageItem::hColumn, which was an
artifact from the DivePlotDataModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two plot_infos of the same dive: one owned by
ProfileScene and one owned by DivePlotDataModel. The latter
was (or at least should have been) a copy of the former.
Simply always access the plot-info which is owned by
ProfileScene anyway. That seems much less brittle. Why
risk some desyncing?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile was using a Qt-model to access its data. This means
routing everything through Qt's QVariants and lead to verbose
code such as
double prev_y = dataModel.index(i-1, vDataColumn).data().toReal();
Instead of storing a data-column and do access via a template,
simply store accessor functions. The code from above now reads as
double prev_y = accessor(data[i-1]);
This should also be distinctly faster for the ns-optimizers among
us.
Only one case was somewhat nasty to convert: The accessors for
the 16 tissues are now generated via a recursive template. Thanks
to C++17's constexpr if, such a template is pleasantly easy
to follow, though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The intention was to use QObject slots for animations.
However, these animations never materialized. Should we
ever want to animate them, we might use the animation
object that is already used for cartesian axes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This indicated the data of the horizontal axis. It was (obviously)
always the time axis. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is only one user of this - let's remove complex
interdependencies.
Note: there seem to be two independent plot_infos: in the
ProfileScene and in the DivePlotDataModel. To avoid behavioral
change, this keeps using the DivePlotDataModel's version.
In any case, this has to be unified.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was logic to disable animation when switching from "no dive"
to "show dive". However, that has bit-rotted away: the plotted
dive was set before plotting the dive and therefore the check
for "change from empty" did not work. Introduce an explicit
empty flag instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old animation was weird: it would reuse the labels
based on the index, not on the value. Thus, with the
new scaling code, sometimes there was no animation at all,
if the value, but not the position changed.
Consider the values instead and let labels appear/disappear.
This makes things slightly more complex.
While changing this code, create our own animation-class.
Thus, we can avoid having the dive axes being QObjects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was just needlessly complicated. For one, it
considered the position of the line, but that is never changed
since redoing the positioning code. Moreover, it does in
lots of lines what is a very idiomatic operation: a
one-dimensional affine transformation. Let's shorten the
actual calculation to two lines.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This label is put to the right of the corresponding curve,
so it should arguably be centered vertically. At least to
me this looks more natural.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The time axis might need some space and the average depth item
puts a formatted depth at to right of the profile. Consider
these when calculating the right border.
Since I found no way to turn of the average depth, this creates
a permanent border, which might or might not be a good thing.
Contains some refactoring of the label-size functions provided
by DiveTextItem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The usual increments (leading 1, 2, 4 or 5) don't look
natural for the time axis. Therefore special case the
time axis and to increments in 1, 2, 3, 4, 5, 6 or 12
parts of a minute or second.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to check wether a screen-point
is located on the profile. Bizzarely, this was done by
transforming into local coordinates and checking
min/max value. Simply check the screen coordinates
directly. Moreover, make the function return whether
the point is inside the region, not outside the region,
to make logic more straight forward.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Hide thumbnails, which are out of the shown range. This became
necessary when converting to absolute scaling.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing from relative to absolute scaling of the char
elements, positioning of the picture thumbnails was broken.
To emulate the old behavior, add a function to DiveCartesianAxis,
that allows positioning with respect to the axis on the screen.
To simplify tuning of the poctuire positions, name a few
constants explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The picture thumbnails were recreated on every profile render,
even when zooming / scrolling. In that case, we should only change
the positions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a potentially expensive operation (e.g. interpolation of
pressure values), so don't recalculate the plot data for every
redraw.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Positional bool parameters to control the rendering of the plot
have been a pain. We are down to one parameter (instant),
but more will be readded, so let's use the opportunity to
control rendering with a flags parameter.
Sadly, C++ has no reasonable way of defining flags that I know
of. Either the identifiers leak (enum), or can't be trivially
ORed (enum class) or are weakly typed (int). Let's just use an
integer for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were the minimum and maximum of a 9-min window.
The profile now uses an adaptive peak-search, so this is not
used anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code used the maximum / minimum values of nine-minute
intervals to indicate maximum / minimum depths. This does not
work well when zooming, since the labels will get sparse.
Instead implement a primitive peak finding algorithm, that
searches for the deepest peak in the whole plot and then
repeats the procedure for the right and left sides, leaving
out a certain distance to the origninal peak. This is repeated
until there are no more peaks found.
Only peaks of a certain prominence are considered, which
conveniently gives us the valleys.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use variable intervals for printing temperature and heart
beat labels. Obviously, so that the labels don't become
sparse on zooming, but also to make them not too crowded
on mobile / small screens.
This doesn't work for depth labels, because these labels
use data provided from the profile.c core that doesn't
know about the size of the chart.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a bunch of conditionally compiled code on mobile
that had special hiding/unhiding rules.
Try to unify that with the desktop code by introducing a
"simplified" flag. This certainly breaks and will have to
be finetuned. In particular, I can't test CCR dives, which
are treated specially on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Avoid "overshooting" of the profile items by linearly clipping
the first and last segment to the boundaries of the time-axis.
Sadly, quite a lot of code, because every profile item is
slightly different.
In particular the pressure-segment handling was rewritten.
It now stores the begin and end of each segment to draw
the appropriate text items.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Due to bit-rot the gas pressure and gas type were displayed on top
of each other. I don't understand the meaning of the old code
[log10(log10(axisRange))] (!). Therefore let's just add the height
of the label to separate the labels.
Probably needs some fine-tuning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a rather trivial change: simply pass in the first
and the last second to the plot function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
That variable was only used in a single function and
always reset at the beginning of the function. No point
in being a member variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Only plot the zoomed range. Currently this passes the sample
before and after the range, so it generally "overshoots" by
one sample in each direction. The plan is to do clipping
on the first and last polygon segment later on.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We were using the QGraphicsScene machinery to zoom into the
plot. This not only zoomed into the dive, but into the whole
thing. In general, one couldn't see the axes anymore.
Instead, adjust the range of the time-axis according to the
zoom-level and position.
Of course, the code isn't adapted to that and the result
is comical. The chart features will have to be fixed
one-by-one. Oh joy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the zoomLevel is reset for every plotDive() call,
because the zooming is done via the QGraphicsScene. However,
this does not work well (e.g. axes are likewise zoomed) and
in the future a change of the zoom level will cause a replot.
Thus, remove the zoom-reset in plotDive() and do it explicitly
when switching dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a constant, no point in keeping it as a member variable.
Contains removal of a pointless #ifdef (guarding against mobile,
but code not compiled on mobile), a typo-fix in a comment and
replacement of Qt's idiosyncratic qreal by double.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two somewhat redundant flags for the axes: the position
(left, right, bottom) and the orientation (up-down, left-right, etc).
Replace the latter by an inverted flag: if true, the axis is
up-down or right-left, i.e. the opposite of what one would expect
for a normal graph.
Set the flag in the constructor and remove the setOrientation()
function.
Sadly, the code is a bit complex, because screen coordinates are
top-to-bottom. Who thought that would be a good idea?
Note: this also fixes the placement of the ticks of the time
axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were virtual functions to calculate the label colors
based on the value of the label. However, these functions
only returned constant values. Therefore, just set these
in the constructors.
Thuse, a few virtual functions and derived classes can be
removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only used in the constructor to create the pen for
the grid lines. Not need to keep it around.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility of axis text / lines is never changed, so set
in axis constructor.
Moreover, instead of rendering the lines/text and then setting
them invisible, do not render them if invisible.
The whole thing appears superfluous, since the proper way to
not show lines/text is to just not call updateTicks on the
axis. But in the future we might want to have axes with text
but no lines, so keep for now.
Since this means breaking out the text / line rendering
into their own function, we might rename some variables to
make them (at least somewhat) more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rounding the axes dimensions to "nice" number may have been a
good idea, but for the time-axis it feels weird.
Therefore revert the time axis to the previous behavior:
range is set according to the data. To differentiate between
time an other axes, use the position: the time axis is the
only axis at the bottom. Yes, that's ugly but pragmatic.
Since we have that flag also use it for the special casing
of the text-display. Spares us one virtual function dispatch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The integers were simply rounded to integers, which might give
ugly intervals (e.g. multiples of 3). Use the code of the
statistics tab, with one modification: take care not to
use intervals below the given precision. The statistics work
differently: there, the precision is adjusted according to
the interval size, not the other way around.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ticks were recalculated twice per plotDive() call:
1) When updating the position of the axes in updateChangeLine()
2) After setting the bounds in plotDive() via setBounds()
Remove the first instance. updateChangeLine() is called in
only one place [from plotDive()] and therefore, the recalculation
is always redundant. Moreover, rename the function to setPosition(),
since it doesn't do any animation at all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to animate the position of the dive event items
when the size of the axis changed. However, that doesn't work
since quite some time. The axes size are changed when
1) switching dives
2) resizing the drawing area
In the first case, the dive event items are fully recalculated.
In the second case, animation speed is set to instant, since
resizing of windows is done continuously on any reasonably
modern desktop anyway. It might make sense on mobile, where
size changes are discontinuous, but there we use static
profiles anyway. Moreover, I checked a few applications and
none of them had animations when switching orientation of
my tablet.
Let's just remove this disfunctional thing and replace it
later, should someone complain.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The partial-pressure-axis was the only DiveCartesianAxis
child that had its own code to set the bounds. The bounds
of all other axes were set in plotDive().
For consistency, do this here as well. Thus, the whole
class can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The number of ticks was generated for each axis with custom
code. This code was not aware of the size of the profile and
could result in overly dense or sparse ticks.
Generalize the generation of the ticks. For now, round tick
values to integers. In the future, try to use more "nice"
looking values as we do for the statistics tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of a host of virtual functions, let the base class
(DiveCartesianAxis) do the formatting of the axis labels.
To do so, it needs to know how to convert the internal
representation (e.g. mm) into the displayed value (e.g. feet).
Moreover, this transformation has to be adapted when changing
the locale-setting, therefore do it for every plot() call.
The transformation itself cannot be a simple linear translation,
because we have non-absolute display units, namely °C and °F.
Thankfully affine transformations are enough though.
Only one custom formatter remains: the time axis. It might
be a good idea to remove the virtual function and do this
via a flag.
This is all done not so much for code simplification, but
because for a general layout of the axis labels, the
axis has to understand the values of the labels and not
only handle them as opaque texts.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dive data are stored internally using integral types using
appropriately fine units (mm, mbar, mkelvin, etc.). These
are converted with functions defined in units.h for display
(m, bar, C, etc.). Usually floating points are returned by
these functions, to retain the necessary precision. There
is one exception: the to_PSI() and mbar_to_PSI() functions.
For consistency, make these functions likewise return floats.
This will be needed for the rework of the profile-axes.
The plan is to use the conversion functions to make the
axes aware of the displayed values. This in turn will be
necessary to place the ticks at sensible distances. However,
the conversions need to be precise, which is not the
case for the current to_PSI() functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of calculating the label sizes of the axes when
relayouting the chart, calculate them at construction time.
To do so, pass the digits before and after the decimal comma
to the constructor.
This is not so much an optimization thing, but rather an
first stab at more general label rendering. Time, of course,
will always be an exception. But hopefully the remaining
values can be done more generally.
Note that currently this code is a total mess. For example,
the labels for the temperature axes are not converted to
F if needed. And therefore also not shown. This will need
some major rethinking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All this did was setting changed to true. Obviously an
artifact, since that is done in the constructor of the
base class anyway. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is bike-shedding: Instead of two setMinimum()/setMaximum()
calls, use a single setBounds() call. A few axes (notably depth
and time) always have a 0 as lower bound. However, this will
change once there is a proper zooming functionality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The placement of the axes was done independently of the
plotting, e.g. when settings changed. Presumably,
for performance reasons. However, since the axes may
depend on whether a dive has heart-rate data or not,
this simply is not viable. To make this work, one
would have to remember whether the previous dive
showed the heart-rate, etc. Not worth it - always
reposition the axes. It should not matte performance-
wise.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I doubt that this is necessary, but since most of the rest
of the profile code passes "isGrayscale" to "getColor()",
do the same here for consistency.
To avoid storing the isGrayscale flag, just create the pens
at construction time and store those.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no more reason to render the profile in printMode.
DPR is also supported in normal mode.
Moreover, don't scale the DPR down by fontScale. If we
have to scale down the fonts, we'll have to do this
differently without squeezing the rest of the profile
features.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The event-icons are positioned according to the top-left
corner (as is usual in computer circles). For the flag
icon it seems more natural to use the bottom of the pole.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlotDataModel was saved with every event to access the
depth. However, since the depth never changes, we can simply
save the depth instead.
Also, since we only need the model to access the plot_info,
pass the plot_info directly. As noted in a previous commit
message, I believe that Qt models are a very bad choice
for intra-application data transfer. They should only ever
be used to interface with Qt.
And since touching this code, pass duration_t instead of int
to depthAtTime() to make the callers less cluttered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over the whole data via the Qt model,
do a simple binary search. Yes, this is premature optimization,
but I had to.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When placing the event icons, the timestamp is looked up and
then, the depth is checked which repeats this operation.
Remove the first instance of this lookup, as it is completely
redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is code to dynamically show/hide event icons of a certain
type. The same code is used to hide generally non-interesting/
redundant items.
Instead, don't even create these items. Yes, this is idle
premature optimization.
A loop over all created event icons to hide them can be
removed, because the icon is hidden anyway on construction
time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no user of this left, because the device-pixel-ratio
is now passed directly to the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On iOS there was special code to scale event icons with DPR
(device pixel ratio). However, that became redundant, when
printing started to also use DPR to scale the icons. Now,
on iOS icon sizes where multiplied twice with DPR.
Let's remove that and, if it is broken, try to fix it
at the correct place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This looks much better on print-outs. The remaining event icons
still need to be converted to SVG.
SVG created by Lubomir I. Ivanov <neolit123@gmail.com> and
made compatible with the Qt SVG renderer by BS.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In renderSVGIconWidth() the image was not cleared, leading
to garbage backgrounds. This should have affected the video
icons. Apparently, nobody is using them..?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For better scalability, we might replace the dive event icons
by SVGs. Since rendering SVGs is potentially very slow, cache
the pixmaps when the scene is generated.
Note: this does not yet do any SVG rendering, only the caching
of pixmaps.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tissue percentages were realized as 16 independent polygons.
That didn't work at all with the new absolute scaling.
Reimplement the item and blast it onto a pixmap. Not only is
this artifact-free, it also should (hopefully) be quite a bit
more efficient than painting numerous lines.
In contrast to the old code, this does access the plot_info
structure directly instead of using the model. Not so much
for performance reason, but rather to make things more robust:
We have a strongly typed language. Why would we shoehorn data
through the weakly typed QVariant and mess with wierd
index-arithmetics. Makes no sense to me. Qt-model have to
be used for interfacing with Qt. They are terrible for
intra-application data transfer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function has accumulated quite some cruft. It seems to add
additional space to make place for certain chart features
(e.g. the average depth text item).
However, it makes no sense to solve this here, as only the
profile knows how much place is needed to display these
features.
Therefore, basically revert this to the original version,
which simply returns the maximum time for long dives
and a threshhold for short dives that depends on the
zoomed_plot setting.
The result looks more reasonable to me, as there is no
(varying!) empty space to the right of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rendering resets the size, which now recalculates the axes.
Therefore, plotDive() must be called. The callers were doing
the opposite: call plotDive() first, then draw().
To make it easier for the callers, present a single interface
that handles these subtleties.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The chart items were laid out in relative terms with respect
to a fixed scene size (100.0, 100.0). This simply does not
cut it when resizing the chart. Why should the axes always
occupy the same fraction of the chart independent of the size.
Moreover, this led to basically unmaintainable code.
Resize the scene according to the viewport and do
absolute placement of the items. This breaks the layout,
but at least now we have a chance to fix things
somewhat reasonably.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile would reload for many settings-changed signals.
It didn't listen to the deco-info-changed signal, because
that had no effect (which seems to be a bug).
Since this flag should indicate whether the deco-info is
shown and therefore a change should replot the profile,
let's listen to the corresponding signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The grid color is saved on construction, no need to pass a parameter.
Note that this fixes a bug where the color was passed as animation
speed. Ooops. That's what you get from weak typing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is less hassle, than passing these around as parameters.
Note: The values are stored but not yet used ("position" has
not use yet and gridColor is still passed as parameter).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To properly layout the axes, it is necessary to specify on
which side of the chart they are located.
There is already an "Orientation" enum. However, that gives
the direction (top-to-bottom, etc.), but not the position.
It might become obsolete in the future, since the direction
can also be expressed by setting min and max accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTextItems were redrawn on every paint() call. This was
a prohibitively expensive operation (converting the text into
a path, drawing an outline, etc.), which was called numerous
times.
Instead, render the text only when changing into a QPixmap
and blit that pixmap in the paint() call.
This will make it possible to do absolutely positioned
DiveTextItems. So far they were placed relatively in
scene coordinates ranging from 0-100(!).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The text and the brush are the two properties of text items
that change dynamically. To avoid complexities concerning
redrawing, set them concurrently instead of in two separate
calls.
Since setting one of the properties requires a full redraw,
there is no performance advantage in setting them individually.
This fixes a theoretical bug: the colors of axis labels were not
updated appropriately. However, it seems like value-dependent
labels weren't used anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Alignment and scale of DiveTextItems are never changed. Therefore,
pass them at construction time. This makes things much easier
if we want to cache the rendered text [currently the text is
rerendered at every paint() event].
This also removes the "parent=0" default parameter of the
constructor, because inadvertently leaving out the last argument
led to a subtle bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To layout the profile we need to determine the height
of texts. Add versions for a DiveTextItem and a static
function, which is passed the scale and dpr. The latter
is used to setup items, where we do not necessarily
have a text at creation time (e.g. the tankbar).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To properly layout the profile we need to know the expected space
required by the vertical axes. In the general case, format the
the text "999". For the partial-pressure-axis, use "0.99".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printFontScale is used to scale up fonts (and icons) when
rendering to high-DPI devices. With absolute scaling, this
will also be used to scale the size of different chart
regions, line thickness, etc. Therefore, give it an more
appropriate name. "Device pixel ratio", which is a well
established term, seems to appropriately describe the
concept.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since there (currently) is no interactive widget on mobile, there
is no point in compiling it. This was a bit more complicated than
expected, since there were other source files (divehandler.cpp
and ruleritem.cpp) which reference ProfileWidget2 and therefore
need to be removed. Otherwise, the dreadful MOC produces unresolved
references.
We could now remove all the conditional compiles in
profilewidget2.cpp, but let's keep them for now. We might have
to readd a number of them later, when making the mobile-profile
interactive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The print mode is passed on construction, not retroactively.
This function thus became unused.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the interactive ProfileWidget2, just
use the ProfileScene to render the profile for printing,
export and mobile. One layer (QWidget) less.
This removes all the kludges for handling DPR on mobile.
Thus, the rendering will now be off and have to be fixed
by redoing the scaling code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Setting the profile and grayscale mode of the profile via
functions is from a time when the same profile widget was
used for printing and the UI. It is simpler to set the mode
when constructing the object and not deal with changes.
To prepare for this scenario, take the flag at construction
time. This still keeps the callers as-is. These will be
adapted later.
Logically, then the printFlag also has to be set in
DiveCartesianAxis at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cartesian axes use animSpeed to animate changes. Instead
of passing down the value to the respective functions, the
speed was stored in the ProfileScene and the axes would
access it there. Very messy. Let's just pass down the speed.
There still are back-references from the axes to the scene,
notably to place labels "outside" of the scene. Let's try
to remove them later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This finalizes the split between interactive (ProfileWidget2)
and non-interactive (ProfileScene) parts of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the ProfileScene does the actual rendering, it needs
access to the "printMode", "isGrayScale" and "fontPrintScale"
variables. Move them down from ProfileView to ProfileScene.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mode of the profile (profile, edit, plan) was set in
MainWindow and ProfileWidget. For consistency move the one
setProfileState() call from MainWindow to ProfileWidget.
This removes a direct access to the profile-view and
therefore improves encapsulation.
Also, clear the profile, when no dive is shown to remove
any potentially dangling references.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was moved to the desktop version. Enter the profile in
the constructor. Somewhat surprisingly, this seems to work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile has an "empty state" showing the subsurface logo,
which is active when no dive is selected.
Switching to/from this mode is quite complex, because all the
chart features have to be hidden/shown, etc. Moreover, this mode
is not needed on mobile, where multiple ProfileWidgets can
be active at the same time and every dive has at least a
"faked" profile.
Therefore, implement this mode directly in the desktop
version of the widget. This makes the rescaling distinctly
less cumbersome. It is implemented using a QStackedWidget,
which switches between the profile and the logo.
This commit does not remove the empty state from the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since using separate profile-instances for print/export,
we never exit print mode. Therefore, the mode parameter
can be removed. This is a preparatory commit for passing
the printMode at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Part of separating the static (for printing, export) and
dynamic (UI) parts of the profile. This is still quite messy
with many direct accesses from the ProfileWidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This simply subclasses QGraphicsScene and is used as
a drop-in replacement. The plan is to step-by-step
move rendering functions there until the non-interactive
code can only use the scene and doesn't have to use
the QGraphicsView. This will hopefully remove quite
some conditional code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The usage of the DiveProfileItems has changed (axes, etc. are passed
at construction time). Update a comment accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The font print scale is now set once on construction and this
function can therefore be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of intializing the text fields and then changing the
font scale via signal-rigmarole, pass down the font-scale
at construction time.
Since the fontPrintScale is only set in print mode, we also
can access it directly instead of testing for printMode.
Since the DiveTextItem is not updated using signals anymore,
the connected flag can be removed.
The commit is larger than I had hoped for, but this makes
things ultimately less brittle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The constructors of Time- and TemperatureAxis don't do anything.
In reasonable modern C++ we can simply reuse the constructor
of the base class with a "using" directive.
The point here is to simplify followup commits that will
add additional parameters to the constructors of the axes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only used internally - there is no point in an
accessor function. It only makes grepping more complicated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not having to readjust the scale on-demand will make the
code distinctly simpler. Let's just pass it once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, we can keep the scale factor constant during existence
of the view. For now, this is simpler than adapting existing
text elements. We might want to make this more flexible later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current way of handling the "print scale factor" is
complex: The text fields are added and later resized via
signals. Things could be simplified by just redoing the
chart when changing the scale factor.
Moreover, in the future we will want to adapt the size of the
axes depending on the size of the texts.
As a first step, factor out the creation of the profile-widget.
This can then be used to recreate the profile when changing
the scale factor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The alternative spelling "visibile" made searching for this
function very annoying. That makes removing it even more
satisfying.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Very annoyingly, to render the profile for printing / export,
the profile still had to be show()n, thus requiring a parent
window.
Analysis of qmlprofile.c showed that this was due to the
transformation matrix not being properly set up on non-show()n
scenes.
Instead, we can simply render via the QGraphicsScene
(circumventing the QGraphicsView).
The code was factored out into the ProfileWidget2::draw()
function. This will hopefully make it easier to change
the size-code of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new class that encapsulates the profile-widget UI.
This is called ProfileWidget, which might be confusing since
the actual display is called ProfileWidget2. However, the
plan is to rename the latter to ProfileView. After all, it
is also used to print and to show the profile on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The MainWindow::configureToolBar() function is called every
time plotCurrentDive() is called. Moreover, this is the only
time that it is called. We might just fold the former into
the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just as for printing, use an independent profile widget, so
that the UI widget doesn't have to be set/reset.
Also, make the size of the exported image independent from
the current window size.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When multiple profiles were exported, for every exported image
the profile-widget was switched to/from print mode.
Move this out of the loop, i.e. initialize and reset the profile
only once. This should slightly speed up export, but not by a lot,
since most of the time is spent by compressing the PNGs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The exportProfile function uses the UI and therefore was
supposed to be declared in backend-shared/* but defined
separately for desktop and mobile. Currently, only the
desktop version exists.
The goal however should be that there is no need of the
UI for this function. In a first step, move the function
to the common backend-shared/* code and conditionally
compile for desktop. In upcoming commits, the function
will be made independent of the UI.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to normal printing, don't misuse the mainwindow's
profile widget to do the printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When printing the dives were rendered into the visible profile.
This meant setting a number of flags and reverting after printing.
That's obviously quite brittle.
Instead, use a separate profile instance, since we can have
different profiles showing different dives now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was just a stub to make the setVisible() function a "slot".
Since there are no more signals using it, remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility of the gas lines is updated on every profile-redraw,
which is performed when the preferences changes. No need to have
these signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility is set on every redraw, which is called when
the preferences change. No need for these signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is rich: when changing to profile-mode, the calculated
tissues are set according to the prefs.calcalltissues flag.
The DiveCalculatedTissue::setVisible() function ignores the
parameter and insteads sets the visibility according to the
expression "prefs.calcalltissues && prefs.calcceiling".
This is because the function is also called by signals,
which provide the wrong parameter.
Pass the correct parameter in the first place. Remove the
crazy signals and the overridden setVisible() function,
which ignores its parameter, later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, setting the visibility of chart features is a mess. It
is done when switching to the profile state and then via signals,
when the preferences are changed.
However, when the preferences are changed the chart is replot anyway.
So let us simply set the visibility on chart replot. Then in
a follow-up commit, the signals can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plan is to simplify the visibility-control of non-interactive
chart features. As a first step identify those features that
depend on preferences-flags and factor out the setting of their
visibility into a new function updateVisibility().
This commit effectively only reorders the setting of the
visibility and therefore should have not user-visible effect.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a dive-site variable, therefore we probably should also
have a dive-trip variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable grouping by trip in the statistics module, split
the get_trip_title() function in a version that appends
a "(n dive(s)" string an one that doesn't. The statistics
module doesn't want that added string, since it displays
the number of dives in a different way.
Also, move the functions to string-format.h, where these
are collected. And rename them to camelCase. Yes, it's
ugly, but consistent with most other C++ code in the code
base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
'constexpr' implies 'const' since it is a stronger guarantee,
so let's remove the redundant 'const'.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Let the compiler figure out the correct type...
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When adding a cylinder, it was added at the end of the list.
This would make hidden cylinders visible as the new rule is
to only hide unused cylinders at the end of the list.
Therefore, add the cylinder after the last used cylinder,
i.e. before the first hidden cylinder.
This means that the position where the cylinder is added has
to be hidden in the undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the equipment tab, unused cylinders (automatically added,
no pressure data) could be hidden. This was implemented using
a QSortFilterProxyModel.
Apparently, it causes confusion if cylinders in the middle of
the list are hidden. Therefore, only hide cylinders at the end
of the list.
QSortFilterProxyModel seems the wrong tool for that job, so
remove it and add a flag "hideUnused" to the base model. Calculate
the number of cylinders when changing the dive.
This is rather complex, because the same model is used for
the planner (which doesn't hide cylinders) and the equipment
tab (which does). Of course, syncing core and model now becomes
harder. For instance, the caching of the number of rows was removed
in a37939889b1a77dd269fd7f25f97b813f733133a and now has to be
readded.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a warning when the code tries to access a non-existing
cylinder, since that indicates that something went out of sync.
However, this warning can never trigger because the bounds are
checked before. Remove the first of the two redundant checks.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In cb80ff746b687a3ad29b53d9f633cbdc6b142c71 internal columns
were added to the cylinder model. These were not hidden in
the planner. Nobody complained?
Remove this clutter from the UI by hiding the columns.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic did not consider the WORKINGPRESS_INT and SIZE_INT
columns added in cb80ff746b687a3ad29b53d9f633cbdc6b142c71.
By some unknown magic this worked by routing everything
through the CylindersModelFiltered model.
Let's fix it and explicitly ignore these columns. Put
the test whether a column should be ignored in a function
to avoid inconsistencies should new columns be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The D in MOD, EAD, END, and EADD stands for "depth" and
as such these should be mm in int rather than double.
The intermediate fn2 and fhe2, however, as intermediate
value should not be rounded to an integer.
The upshot of this is a litle more numerical stability.
It should lead to more stable values in TestProfile
when run on architectures with different floating
point precision.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The undo commands for depth and duration editing cleared
the samples of the dive computer. They relied on the profile
automatically creating a fake profile. However, at some point
that code got removed. Therefore, do it explicitly in the undo
command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CCRs are different. It does not make sense to compute
a depth dependent SAC. You could compute the rate of O2
consumption but even that is likely wrong (as O2 in the
diluent would enter that as well), so simply don't attempt
it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
And while doing that, have all the cases where we already include
qthelper.h simply use a define in that header file - but keep the two
other instances of the define where the C++ source don't need qthelper.h
otherwise.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As of November 20201 the Google Play store now requires that new apps
target API level 30. The minimum API level remains 21 so we should
continue to support devices all the way back to Android 5.0 (Lollipop).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Very similar structure to the XML format. Raw data is again saved as a
hex string (which implicitly provides us with its length). The rest of
components are in a more human readable format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always use the global fingerprint table - maybe this should just not
be a parameter of the accessor functions?
The syntax is very simple - the raw data is encoded as a hex string, the
rest of the components are hex numbers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to not break existing behavior, we still store fingerprints on disk, but
we first check the data in the in-memory table, and we remember the fingerprint data
in the fingerprint table as well (which is then saved as part of the dive log data).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds the basic structures and the accessor functions needed to
manage a table of fingerprint data. The table is indexed by the hash of
the model name and binary serial number as created by libdivcecomputer.
This way the data is accessible when libdivecomputer fist accesses a
dive computer (which is the point in time when we need to use the
fingerprint.
The table also contains the corresponding device id and dive id so we
can verify that the current dive table still contains that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In both places in the UI where we show the date of a dive during
download we are actually pressed for space. So let's use the short
version of the date string to save some space.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most divecomputers download data dive by dive - so we get reasonably
frequent updates during the download (as new dives are found and posted
in the progress text area). But some (like the G2) download all of the
new dives at once and only then start parsing them. As a result the
download can look like it is hung.
As a compromise this shows updates on the data received in 10kB
increments. Which for most cases should never be shown and therefore not
make the user experience any worse - but for cases like the G2 will make
a huge difference.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The exactMatch in getVersion() was rather bogus, given the pattern.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The syntax for matches and captures has changed and needed to be
adjusted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The syntax for matches has changed and needed to be adjusted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The syntax for matches and captures has changed and needed to be
adjusted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
Much of this is a simple replacement of one class with the other, but
there are some changes to the way matches are tracked and captures are
created. Also, the exactMatch now needs to be implemented via anchors in
the regular expression itself.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
This is a straight forward replacement without any other code changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
When looking at replacing this use of a QRegExp it seemed like a much
better idea to simply switch to utilizing the taxonomy data instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The docker container for Tumbleweed has been broken for a while now.
Given the Hirsuite gives us Qt 5.15 testing, I guess it makes sense to
drop Tumbleweed for now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Builds started to fail because v2.2.2 (about 18 months old) couldn't be
found anymore. That issue seems to have been fixed, but it was a good
reminder not to get completely disconnected from upstream here.
This switches things to the currently latest version of the Android USB
library (which coincidentally will also provide support for additional
USB-serial chipset - not that I think that any dive computers will
benefit from that).
Some of the interfaces changed in the upstream Java library and our code
had to be adjusted to accomodate this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If cmake is called multiple times we can end up with a recursive set of
symbolic links that can confuse package build scripts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In trying to avoid the wrath of the Google Play police I ended up giving
up too many permissions. And while in my test installs things continued
to work, in new installs on Android 10 or newer the lack of
FINE_LOCATION permission resulted in BLE scans no longer working.
The frustrating thing is that apparently installing an update with a
different set of permissions isn't enough to trigger either the bug or
the fix (at least not reliably). What appears to work is to uninstall
the existing app and then do a fresh install of a new app with the
correct permissions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix a pair of warnings, which annoyed me for a long time:
For some reasons prefs.bottompo2 is an integer (mbar)
whereas prefs.modpO2 is a float (bar). This results
in mixed integer/floating point arithmetics when
conditionally using either of them. And ultimately
a warning, when storing a mbar value as an integer.
Fix this by an explicit cast to int after converting
modpO2 to mbar.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On Android devices that no longer get updates to the system installed
SSL root certificates, the user can easily install the updated Let's
Encrypt root certificate, but that is only used by Subsurface-mobile if
we explicitly allow the use of those user installed root certificates.
Fixes#3335
Suggested-by: Greg Hunter
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Air is a special gas that does not contain oxygen according
to gasmix.o2.fraction. If you want to use the fo2, you
need to use get_o2() to treat this special case correctly.
This fixes a bug when setting the MND of a gas containing
21% oxygen when o2 is considered not narcotic.
Reported-by: Christoph Gruen <gruen.christoph@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In commit 105b60389c ("mobile: remove GpsLocation reference from qmlmanager") I
was a bit careless with the code removal and unintentionally also removed the
initialization of the progress callback. With this change the updates from the
download process are once again shown on screen in the mobile app.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we found an invalid sensor (referring to a non
existing cylinder) in fixup_dive() the sensor-id was
set to NO_SENSOR.
This led to invalid XML files, because the code decides
to switch into legacy mode. However, there are two
pressure readings, which is invalid in legacy mode.
Therefore, also clear the pressure data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The camera sync feature has been moved above the Ok and Cancel buttons
and given its own descriptive header. The checkbox to ignore unaligned
image timestamps has been moved closer to the buttons.
Signed-off-by: Tim Segers <tsegers@pm.me>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QTimeEdit field is severely limited when it comes to the supported
time range. By coding our own input / validation we can allow far larger
time shifts. For simplicity, this always assumes hours:minutes format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using the camera sync feature to sync media to the dive timeline,
the calculated time difference was considered invalid if it was more
than 24 hours.
To prevent this, this commit disables the manual time offset input
fields when the camera sync button is clicked. It then uses the epoch
difference in the final offset calculation, enabling arbitrary time
differences between camera and divecomputer.
Signed-off-by: Tim Segers <tsegers@pm.me>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to make our fingerprinting code work better, by avoiding
using the "deviceid" field that has always been unreliable because we've
calculated it multiple different ways, and even for the same version of
subsurface, it ends up changing in the middle (ie we calculate one value
initially, then re-calculate it when we have a proper serial number
string).
So instead, the fingerprinting code will look up and save the
fingerprint file using purely "stable" information that is available
early during the download:
- the device model name (which is a string with vendor and product name
separated by a space)
- the DC_EVENT_DEVINFO 32-bit 'serial' number (which is not necessarily
a real serial number at all, but hopefully at least a unique number
for the particular product)
but because the model name is not necessarily a good filename (think
slashes and other possibly invalid characters), we hash that model name
and use the resulting hex number in the fingerprint file name.
This way the fingerprint file is unambiguous at load and save time, and
depends purely on libdivecomputer data.
But because we also need to verify that we have the actual _dive_
associated with that fingerprint, we also need to save the final
deviceid and diveid when saving the fingerprint file, so that when we
load it again we can look up the dive and verify that we have it before
we use the fingerprint data.
To do that, the fingerprint file itself contains not just the
fingerprint data from libdivecomputer, but the last 8 bytes of the file
are the (subsurface) deviceid and the diveid of the dive that is
associated with the fingerprint.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That seems to be the way to force it to not request FINE_LOCATION or GPS access.
If I leave this on 'auto' then the dependency on QtPositioning (for showing the
map) appears enough for it to claim access to GPS location. I no longer want
to deal with the Google Play police for that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only used in context of acquiring GPS locations with the mobile app, which
we no longer do.
Keep the DiveAndLocation structure around as that's needed by the
ApplyGpsFixes command.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Given the nonsense that Google and Apple makes us go through in order to
support this feature, it's time to cut our losses and walk away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When viewing dives on mobile the notes field does not support rich
text. User formatting, output from the planning feature, etc will
render html as plain text.
Adding qml tag to support rich text
Signed-off-by: Josh Torres <torres.josh.j@gmail.com>
In commit 4724c88 get_plot_details_new was updated to pass an index
instead of the entry into plot_string. This means we are passing "i" to
plot_string after the final increment of the for loop, instead of
getting the entry[i] within the loop before the final increment. This
means if we are mousing over the far right of the graph, where the time
based break is not hit, we will end up passing an index equal to nr-2
instead of nr-3, which is intended to shave off the final two rows
containing data not useful to the display.
There are a handful of ways to fix this. This commit intends to be
consistent with stylistic choices made elsewhere in the project.
Signed-off-by: Josh Torres <torres.josh.j@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removal of a cylinder requires a renumbering of
cylinders in the core data structures (samples, etc.).
The renumbering was performed in the undo-action of
cylinder removal, but not during actual cylinder removal.
What a mess!
Add the missing call.
Attention: this makes the deletion of sensor-readings
on cylinder-deletion non-undoable!
Undo will have to be fixed in upcoming commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We want to prevent the user from accidentally deleting a
cylinder with sensor readings. Therefore, we need such a
function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Due to changes in the handling of sensor-ids, invalid XMLs were
generated. In particular, these contained duplicate attributes
in the sample tags.
Even though these files shouldn't exist, let's try to parse
them anyway. Some data will be lost, but that's better than
not opening the file.
libxml2 can be told to try to recover from such petty(?) errors
by passing the XML_PARSE_RECOVER flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Prior to this change, we had two different cylinder lists as models for
drop down boxes - one that prepends the "no default cylinder" entry
(which we need for setting up no default cylinder to be used in the
app), and another one that only includes actual cylinders.
The problem occured if a dive is created before the first time we edit
an existing dive: in this case we are applying indices across the two
models, but the indices are of course off by one; this results in
actually picking the wrong cylinder. So each time we try to edit a dive,
we end up with the previous cylinder in the list.
This commit simplifies the code by having only one place where we create
list of cylinder names (which is then used as the model for the combo
box). It also uses more logical names for the two 'flavors' of this list
to make it clear which one is supposed to be used (the regular list when
editing or adding dives, the one with the "no default cylinder" entry
prependet for the Settings page).
Reported-by: Brian Fransen
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- add string serial numbers for Suunto Vyper and Mares IconHD type dive computers
- add support for Cressi Neon
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For dives with mixed divemode, one needs to check sample.setpoint
to figure out if the segment is an OC segment and the po2 needs
to be computed from the gasmix and ambient pressure.
This fixes#3310
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When strings in dive details wrap, the line spacing is too tight
in some circumstances. While not perfect, this change improves
the situation somewhat.
See #3263
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already showed the tags, but we didn't allow the user to edit them.
This tries hard not to create inconsistent or illogical tags by trimming
white space and being careful with how the tags are added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the mobile version we should always allow a little more wait time for
the cloud server - there just seem to be more issues with response times
on mobile devices, especially when in places with poor data reception
(which isn't uncommon for dive sites).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does the right thing even when removing a nickname by setting it to
an empty string. The oddly named DiveListNotifier handles the need to
redraw the profile when the name changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We no longer need the remove infrastructure, and the edit nickname function
becomes much more intuitive to use by passing in the dive computer for
which we want to create a nickname instead of the internal index into
the array of devices.
This also removes / simplifies the device list update signals in the
DiveListNotifier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes it much easier to manipulate dc nickname entries. In order
for that to work we can't simply remove entries with empty nickname (but
that isn't needed, anyway, as the code that saves XML or git already
handles that case correctly).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... it just causes problems later when we free them, since we don't do
any reference counting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is just a quick first implementation - it will need to use the undo
code in the future, but for now this is a reasonable first step.
It's also missing the code to redraw the profile with the updated DC
name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we save the divecomputer data, we never actually save the serial
value as a field. We used to rely on saving the very dodgy 'deviceid',
and then look up the serial number from there. And that never really
worked reliably, but we didn't really notice, because we never really
_used_ the serial number anywhere.
The only place the serial number is actually reliably displayed is in
the "Extra data" tab, which contains the key value pairs, and that's
where the original dive download code got the serial number from.
So just parse that at load time too, the same way we parsed it at dive
download time.
In fact, do the firmware version the same way, and remove the code from
the downloader, since it too can rely on 'add_extra_data()' just picking
up the information directly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the menu item to rename a dive computer (ie create a nickname
for it) when right-clicking on the dive computer name of a dive computer
that has a serial number (indicated by having a non-zero ->deviceid).
It is nonfunctional because it's really just the skeleton code: it needs
the UI to actually ask for a new nickname, and then it needs to actually
do the proper "create_device_node(model,serial,nickname)" to set it (or
remove the nickname if empty).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The TabDiveComputer model won't work in the new world order, where you
can't even insert a new device entry without a nickname to be edited.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have this odd legacy notion of a divecomputer 'device', that was
originally just basically the libdivecomputer 'EVENT_DEVINFO' report
that was associated with each dive. So it had firmware version,
deviceid, and serial number.
It had also gotten extended to do 'nickname' handling, and it was all
confusing, ugly and bad. It was particularly bad because it wasn't
actually a 'per device' thing at all: due to the firmware field, a dive
computer that got a firmware update forced a new 'device'.
To make matters worse, the 'deviceid' was also almost random, because
we've calculated it a couple of different ways, and libdivecomputer
itself has changed how the legacy 32-bit 'serial number' is expressed.
Finally, because of all these issues, we didn't even try to make the
thing unique, so it really ended up being a random snapshot of the state
of the dive computer at the time of a dive, and sometimes we'd pick one,
and sometimes another, since they weren't really well-defined.
So get rid of all this confusion.
The new rules:
- the actual random dive computer state at the time of a dive is kept
in the dive data. So if you want to know the firmware version, it
should be in the 'extra data'
- the only serial number that matters is the string one in the extra
data, because that's the one that actually matches what the dive
computer reports, and isn't some random 32-bit integer with ambiguous
formatting.
- the 'device id' - the thing we match with (together with the model
name, eg "Suunto EON Steel") is purely a hash of the real serial
number.
The device ID that libdivecomputer reports in EVENT_DEVINFO is
ignored, as is the device ID we've saved in the XML or git files. If
we have a serial number, the device ID will be uniquely associated
with that serial number, and if we don't have one, the device ID will
be zero (for 'match anything').
So now 'deviceid' is literally just a shorthand for the serial number
string, and the two are joined at the hip.
- the 'device' managament is _only_ used to track devices that have
serial numbers _and_ nicknames. So no more different device
structures just because one had a nickname and the other didn't etc.
Without a serial number, the device is 'anonymous' and fundamentally
cannot be distinguished from other devices of the same model, so a
nickname is meaningless. And without a nickname, there is no point in
creating a device data structure, since all the data is in the dive
itself and the device structure wouldn't add any value..
These rules mean that we no longer have ambiguous 'device' structures,
and we can never have duplicates that can confuse us.
This does mean that you can't give a nickname to a device that cannot be
uniquely identified with a serial number, but those are happily fairly
rare (and mostly older ones). Dirk said he'd look at what it takes to
give more dive computers proper serial numbers, and I already did it for
the Garmin Descent family yesterday.
(Honesty in advertizing: right now you can't add a nickname to a dive
computer that doesn't already have one, because such a dive computer
will not have a device structure. But that's a UI issue, and I'll sort
that out separately)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the last displayed dive had events, those DiveEventItems had slots connected
that would update those icons if things changed. When closing the dive log and
switching to a different one, those slots were still called and would then access
freed memory (the event structure from that old dive that is long gone by then).
This code explicitly deletes those DiveEventItems which also removes those signal
slot connections.
Fixes#3305
Sugested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we download a first dive computer and add a dive site to the dive (by
setting a location name for example), and then download from another
dive computer that provides us with GPS data, we should keep the
existing dive site information, but add the GPS data from the freshly
downloaded dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit e42fc1a1e9a13c77d3474dbcb26b68b8772b8c6d introduced a
crash condition. Apparently the code attempts to test whether
the clicked-on item is a top-level dive. The "Collapse others"
menu item should not be shown in that case. It does this by
testing "d->divetrip". However, "d" might quite logically be
null if clicking on an unexpanded trip header.
Therefore, check explicitly for the trip header case (which
should show the menu item) and for good measure prevent
the nullpointer access (that should be caught by testing
for trip, but who knows).
Fixes#3301.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This adds a cleanup function to be called after a divelogs.de upload
finishes (successful or not) to make sure the temporary zip file is
closed and removed.
Signed-off-by: Richard Fuchs <dfx@dfx.at>
On multi-user systems with a shared directory for temporary files, using
a static file name can lead to permissions problems and subsequent
errors due to collisions. Use a random unique file name for each
generated file to avoid these problems.
Note: the temporary file generated from the divelogs.de upload is still
left behind after the upload finishes.
Signed-off-by: Richard Fuchs <dfx@dfx.at>
The DiveCalculatedCeiling had a back-pointer to the profileWidget.
This was used for weird control-flow shenanigans, which were
removed in 975c123a30de95eafd9b3c2ce2a625a1d05a79dc.
Remove this now useless member variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The shouldCalcluateMaxTime and shouldCalculateMaxDepth member
variables of ProfileWidget2 are set to false during drag-mode to
avoid strange shrinking of the graph. They always adopt the
same value. Therefore, replace by a single shouldCalculateMax
boolean.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I thought that explicitly requesting Qt5 should be enough, but we have a report
from a user who tried to build against Qt6 and cmake happily let them proceed.
So let's fail this explicitly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The intent of the code was to check that there is a string and it has at least
two characters. Since iter is the result of a strchr(iter, '|') call, we
know that if iter isn't NULL, iter[0] is '|', so we only need to check the next
character.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
try_to_xslt_open_csv() re-allocates the memory passed in (not really great as
far as design goes, maybe something that should be reimplemented). Doing
pointer arithmatic with the returned base pointer results in garbage, unless
one gets super lucky and the realloc manages to not move the memory.
It's a wonder this ever worked.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before making the cylinder-table dynamic, dives always
had at least one cylinger. When such a dive is displayed,
the TabDiveInformation class calls per_cylinder_mean_depth().
If there are no samples, this function generates a "fake
profile" with fake_dc(). Thus, effectively dives always
had samples once the user was displaying them.
When the cylinder-table was made dynamic, dives without
cylinders were supported. This can notably happen, when
importing from CSV (this could actually be a bug).
per_cylinder_mean_depth() exits early in that case and
doesn't create a fake profile. This lead to crashes
of the profile-widget, which were fixed in 6b2e56e5131.
Non-sample dives were now shown with the Subsurface-logo.
To restore the previous behavior, genarate a fake profile
for sample-less dives in fixup_dive(), which is called
anytime a dive is loaded or imported. This seems to
have been the intention anyway and this worked only
"by chance". This will make a few fake_dc() calls obsolete,
but so be it.
Since fake profiles are now generated on loading,
the parse-tests need to be fixed to account for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we end up with nonsensical values which lead to a division by zero,
which in return leads to different results, depending on platform.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging two dives, the higher CNS value was taken. This could
result in inconsistent CNS values if two dives were merged where
one dive's CNS was calculated from a "fake profile", i.e. a dive
without dive-computer profile. In that case, the most conservative
value (all time spent at the bottom) was assumed. The merged dive
then consisted of the dive-computer profile and the conservative
CNS estimate.
This is fixed by setting the CNS value to "0" after merging,
which means "unknown". The correct value will then be recalculated
in "fixup_dive" from the actual sample data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The data of the membuffer is passed as a data/length pair
to xmlReadMemory(). There is no point in NUL-terminating it.
Moreover, pass the data directly to xmlReadMemory()
instead of via variables. These variables are reused
later with a different meaning, making this super-confusing.
The membuf variable is turned from "const char *" to "char *"
to signal that we own the buffer.
Amazingly, zip_source_buffer() frees the buffer, even though
a "const void *" is passed in. This API is pure madness. Add
a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a function to format QString with C-format strings. Let's
use it instead of doing a detour via membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, the membuffer data is automatically freed when going
out of scope - one thing less to worry about.
This fixes one use-after-free bug in uploadDiveLogsDE.cpp
and one extremely questionable practice in divetooltipitem.cpp:
The membuffer was a shared instance across all instances
of the DiveToolTipItem.
Remves unnecessary #include directives in files that didn't
even use membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
C-style memory management is a pain and nearly nobody seems to get
it right. Add a C++-version of membuffer that frees the buffer
when it gets out-of-scope. Originally, I was thinking about
conditionally adding a constructor/destructor pair when compiling
with C++. But then decided to create a derived class membufferpp,
because it would be extremely confusing to have behavioral change
when changing a source from from C to C++ or vice-versa.
Also add a comment about the dangers of returned pointer: They
become dangling on changes to the membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The sensor-id in the sample struct was a uint8_t, with all
the known problems of unsigned integers. In the rest of the
code cylinder ids are signed integers. To avoid confusion,
make it a signed int. int8_t should be enough (max. 127
cylinders). To allow for degenerate cases, use an int16_t.
16k cylinders should be enough for everyone.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The changes in commit 4daf687876 ("profile: remove [disable|enable]Shortcuts()
signals") resulted in us no longer enabling the shortcuts on the desktop (at
least on macOS where I debugged this). This placement of the call feels like a
bit of overkill, but at least it shouldn't be wrong.
Fixes#3293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were two function-static variables in ToolTipItem::refresh(),
which is a very scary proposition. Curently, there is only
one ToolTipItem, but this may change on mobile, where there
are multiple profiles at the same time.
Remove this timebomb and make the two objects subobjects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code will happily perform out-of-bound accesses if
pressure-sensors refer to non-existing cylinders. Therefore,
sanitize these values in fixup_dive(), which is called
everytime a dive is loaded or imported.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By default, the parser would create samples with cylinder
ids 0 and 1. This creates out-of-bound accesses for the
common one-cylinder (or even no-cylinder) dives. These
were harmless when the cylinder-table was of a fixed size.
Since changing to a dynamic cylinder-table, these became
actual out-of-bound accesses. Don't create such samples
in the parser.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The sensor member of sample refers to a cylinder from which
the pressure was read. However, some dives don't even have
a cylinder. Therefore, introduce a special NO_SENSOR value
for these dives. Since the cylinder is given as a uint8_t,
0xff seems to be a sensible choice.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When user has selected to show unused cylinders in equipment tab,
respect this setting when exporting to divelogs.de.
Fixes#3277
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
It appears that this well intended change in commit 52aa7d83b6 ("Increase event
icon size in print mode") actually causes the scaling of the event icons to be
generally wrong. This removes the hard 4* scaling and also adds some debugging
output in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This variable is not used outside a single function, where it
is reset every time the function runs. This can be realized by
a function-local variable just as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We simply don't use release candidates in Subsurface these days, and no one
then moves these builds to stable after testing, so stable has been getting
stale while the builds that people SHOULD use have been sitting in candidate.
Of course, this will only become the default after our next release (as I don't
want four digit versions in a release build, so I can't simply add this to our
snap-stable branch).
Oh well - 5.0.3 will happen soon, given the print resolution issue for icons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When printing with low DPI, the dive event items become comically
large, because they are not resized like the fonts. Therefore,
scale using the fontPrintScale.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This occurs upon importing dives for example via CSV.
Make sure the profile display is cleared when selecting
such a dive rather than showing a different dive.
Allow editing the profile for such a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This enum was an artifact from the primordial days of the profile
widget. As far as I can see it was never used.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ADD state is not used for adding dives since adding dives
was made undoable. Therefore, rename it to EDIT state, since
that is what it is used for.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearly, this comment got lost in code reshuffling, as it comments
about ADD and PLAN mode, but is in front of picture declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtQuick.2 ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtLocation ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtPositioning ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/lib/QtPositioningQuick.framework ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Frameworks)")
install(CODE"execute_process(COMMAND cp -a ${QT_INSTALL_PREFIX}/lib/QtPositioningQuick.framework ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Frameworks)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/lib/QtQmlWorkerScript.framework ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Frameworks)")
install(CODE"execute_process(COMMAND cp -a ${QT_INSTALL_PREFIX}/lib/QtQmlWorkerScript.framework ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Frameworks)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtQuick ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtGraphicalEffects ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtQml ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${_qt5Core_install_prefix}/qml/QtPositioning ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${QT_INSTALL_PREFIX}/qml/QtQuick ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${QT_INSTALL_PREFIX}/qml/QtGraphicalEffects ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${QT_INSTALL_PREFIX}/qml/QtQml ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
install(CODE"execute_process(COMMAND cp -a ${QT_INSTALL_PREFIX}/qml/QtPositioning ${CMAKE_BINARY_DIR}/${APP_BUNDLE_DIR}/Contents/Resources/qml)")
[Source](https://subsurface-divelog.org/documentation/contributing/ "Permalink to Contributing | Subsurface")
# Contributing to Subsurface
# Contributing | Subsurface
## Ways to Contribute
It might be a good idea to join our [mailing list][1]. Conversation there is in English -- even though this site (and Subsurface itself) are available in many languages, the shared language we all communicate in is English. Actually "Broken English" is just fine… :-)
There are many ways in which you can contribute. We are always looking for testers who are willing to test the code while it is being developed. We especially need people running Windows and Mac (as the majority of the active developers are Linux people). We are also always looking for volunteers who help reviewing and improving the documentation. And very importantly we are looking for translators willing to translate the software into different languages. Our translations are centrally handled at [Transifex][4] – please sign up for an account there and then request to join the [Subsurface Team][5].
We also tend to have some developers hanging out in the `#subsurface` channel on [Freenode][2].
If you would like to contribute financially to help us cover the cost of running a free cloud synchronisation service for dive logs, you can do so by sponsoring this project.
There are many ways in which you can contribute. We are always looking for testers who are willing to test the code while it is being developed. We especially need people running Windows and Mac (as the majority of the active developers are Linux people). We are also always looking for volunteers who help reviewing and improving the documentation. And very importantly we are looking for translators willing to translate the software into different languages. Our translations are centrally handled at [Transifex][3] \-- please sign up for an account there and then request to join the [Subsurface Team][4].
If you would like to contribute patches that fix bugs or add new features, that is of course especially welcome. If you are looking for places to start, look at the open bugs in our [bug tracker][5].
## Joining the Subsurface Contributors' Community
Here is a very brief introduction on creating commits that you can either send as [pull requests][6] on our main GitHub repository or send as emails to the mailing list. Much more details on how to use git can be found at the [git user manual][7].
To get 'into the loop' for what is going on in Subsurface you should join our [mailing list][1], and start watching the [subsurface/subsurface repository on GitHub][2]. Conversation in the mailing list is in English – even though Subsurface itself and the website and documentation are available in many languages, the shared language the contributors communicate in is English. Actually "Broken English" is just fine… :-)
Start with getting the latest source.
`cd subsurface`
`git checkout master`
`git pull`
ok, now we know you're on the latest version. Create a working branch to keep your development in:
`git checkout -b devel`
Edit the code (or documentation), compile, test… then create a commit:
`git commit -s -a`
Depending on your OS this will open a default editor -- usually you can define which by setting the environment variable `GIT_EDITOR`. Here you enter your commit message. The first line is the title of your commit. Keep it brief and to the point. Then a longer explanation (more on this and the fact that we insist on all contributions containing a Signed-off-by: line below).
If you want to change the commit message, "git commit --amend" is the way to go. Feel free to break your changes into multiple smaller commits. Then, when you are done there are two directions to go, which one you find easier depends a bit on how familiar you are with GitHub. You can either push your branch to GitHub and create a [pull requests on GitHub][6], or you run
`git format-patch master..devel`
Which creates a number of files that have names like 0001-Commit-title.patch, which you can then send to our developer mailing list.
Of course it is also a good idea to join our [User Forum][3], to be able to see feedback and bug reports from our users.
## Tips for Code Contributions
### Code Change Submissions
If you would like to contribute patches that fix bugs or add new features, that is of course especially welcome. If you are looking for places to start, look at the open bugs in our [bug tracker][6].
Here is a very brief introduction on creating commits that you can either send as [pull requests][7] on our main GitHub repository or send as emails to the mailing list. Much more details on how to use Git can be found at the [Git user manual][8].
Start with getting the latest source.
cd subsurface
git checkout master
git pull
ok, now we know you're on the latest version. Create a working branch to keep your development in:
git checkout -b devel
Edit the code (or documentation), compile, test… then create a commit:
git commit -s -a
Depending on your OS this will open a default editor – usually you can define which by setting the environment variable `GIT_EDITOR`. Here you enter your commit message. The first line is the title of your commit. Keep it brief and to the point. Then a longer explanation (more on this and the fact that we insist on all contributions containing a Signed-off-by: line below).
If you want to change the commit message, `git commit --amend` is the way to go. Feel free to break your changes into multiple smaller commits. Then, when you are done there are two directions to go, which one you find easier depends a bit on how familiar you are with GitHub. You can either push your branch to GitHub and create a [pull requests on GitHub][7], or you run:
git format-patch master..devel
Which creates a number of files that have names like `0001-Commit-title.patch`, which you can then send to our developer mailing list.
### Developer Certificate of Origin (DCO)
When sending code, please either send signed-off patches or a pull request with signed-off commits. If you don't sign off on them, we will not accept them. This means adding a line that says "Signed-off-by: Name \<Email\>" at the end of each commit, indicating that you wrote the code and have the right to pass it on as an open source patch.
See: [Signed-off-by Lines][8]
See: [Signed-off-by Lines][9]
Also, please write good git commit messages. A good commit message looks like this:
Header line: explaining the commit in one line
### Commit Messages
Body of commit message is a few lines of text, explaining things
in more detail, possibly giving some background about the issue
being fixed, etc etc.
Also, please write good Git commit messages. A good commit message looks like this:
The body of the commit message can be several paragraphs, and
please do proper word-wrap and keep columns shorter than about
74 characters or so. That way "git log" will show things
nicely even when it's indented.
Reported-by: whoever-reported-it
Signed-off-by: Your Name \<you@example.com\>
Header line: explaining the commit in one line
Body of commit message is a few lines of text, explaining things
in more detail, possibly giving some background about the issue
being fixed, etc etc.
The body of the commit message can be several paragraphs, and
please do proper word-wrap and keep columns shorter than about
74 characters or so. That way "git log" will show things
nicely even when it's indented.
Reported-by: whoever-reported-it
Signed-off-by: Your Name <you@example.com>
That header line really should be meaningful, and really should be just one line. The header line is what is shown by tools like gitk and shortlog, and should summarize the change in one readable line of text, independently of the longer explanation.
The preferred way to write a commit message is using imperative mood, e.g. "Make foo do xyz" instead of "This patch makes foo do xyz" or "I made foo do xyz", as if you are giving commands or requests to the code base.
https://en.wikipedia.org/wiki/Imperative_mood
The preferred way to write a commit message is using [imperative mood][12], e.g. "Make foo do xyz" instead of "This patch makes foo do xyz" or "I made foo do xyz", as if you are giving commands or requests to the code base.
![gitk sample][9]
![gitk sample][10]
Example with gitk
_Example with gitk_
Additionally when important changes to behaviors, fixes or new feature are introduced an entry must be added to CHANGELOG.md file. Always add new entries at the very top of the file above other existing entries. Use this layout for new entries:
Area: Details about the change [reference thread / issue]
### Changelog
Additionally when important changes to behaviors, fixes or new feature are introduced an entry must be added to `CHANGELOG.md` file. Always add new entries at the very top of the file above other existing entries. Use this layout for new entries:
Area: Details about the change [reference thread / issue]
When multiple areas are affected list the areas separated with a /:
Area1/Area2: Detail about the change [reference thread / issue]
Area1/Area2: Detail about the change [reference thread / issue]
Here is a (non exhaustive) list of Areas that can be used:
* Bluetooth
* Cloud-storage
* Desktop
@ -75,15 +103,20 @@ Here is a (non exhaustive) list of Areas that can be used:
* Printing
* Profile
In order to make reviews simpler and have contributions merged faster in the code base, please follow Subsurface project's coding style and coding conventions described in the [CodingStyle][10] file.
### Coding Style
In order to make reviews simpler and have contributions merged faster in the code base, please follow Subsurface project's coding style and coding conventions described in the [CodingStyle][11] file.
[expand title="Which operating system does Subsurface support?"]
Subsurface runs on Windows (32 and 64bit, Windows XP and newer), MacOS (Intel, 10.7 and newer) and many flavors of Linux. We provide Linux packages for Ubuntu, Linux Mint, Debian, openSUSE and Fedora. Details on where to find Subsurface for your OS are on our <a title="Downloads" href="http://subsurface-divelog.org/download/">Downloads</a> page.
[/expand]
[expand title="How do I install Subsurface on Windows?"]
<a href="http://subsurface-divelog.org/download/">Download the installer</a> and double-click on it. You will get a warning that the installer is from an unknown publisher. Please click Yes to allow installation. Next you are presented with the license for Subsurface, after that you can choose where you would like to install Subsurface (the default should be reasonable in most cases) and the <em>Start Menu Folder</em> where a shortcut to call Subsurface and an entry to uninstall Subsurface will be installed.
[/expand]
[expand title="How do I install Subsurface on MacOS?"]
<a href="http://subsurface-divelog.org/download/">Download the installer DMG</a> and open it. Drag the Subsurface icon on to the Applications icon.
[/expand]
[expand title="How do I install Subsurface on Ubuntu?"]
Make sure you are getting a current version with all its Qt5 dependencies.
[/expand]
[expand title="How do I install Subsurface on openSUSE?"]
Go to <a href="http://software.opensuse.org/download.html?project=home:Subsurface-Divelog&package=subsurface">our build service project page</a>and follow the simple instructions there -- it’s as easy as two clicks.
[/expand]
[expand title="The shortcut keys don't work on Ubuntu"]
Please uninstall <code style="font-size: 9pt;">appmenu-qt5</code> and the shortcuts will work.
[/expand]
[expand title="How can I post my dive on Facebook?"]
Go to the preferences and select the Facebook section. There you can log in to your Facebook account. You have to do this every time you want to post to Facebook, for privacy reasons Subsurface does not stay logged in to Facebook between sessions.
Once you are logged into Facebook you can close the preferences. You will now see a Facebook button next to the Notes section towards the center of the Subsurface window. Clicking on that opens a dialog that allows you to control which parts of the current dive are posted to your timeline. The post is always "private" - you need to connect to Facebook and change the audience for that post in order for others to see it (we do this so you get to review what is posted before it becomes public).
[/expand]
[expand title="How can I post my dives on the web?"]
Currently Subsurface integrates with two different online logbooks: <a href="http://divelogs.de">divelogs.de</a>and <a href="http://dive-share.appspot.com/">DiveShare</a>. You can export dives to either of those two services from the File➝Export menu.
[/expand]
[expand title="How do I use the companion apps?"]
There are companion apps available for both Android and IOS. You can find them in the respective stores. Once you install them on your mobile device you can either mark dive sites and name them (e.g., right before or after a dive), or you can run a "service" in the background that periodically records your position. Don't forget to turn the service off when you are done as it may increase your battery consumption.
Once you have uploaded the dive site data from the companion app to our web service, you can then download the data from within Subsurface. Do this <em>after</em> you have downloaded the dives from that day from your divecomputer (or manually added the dives) so that Subsurface can match the dive data (and their time stamps) with the data stored by the companion app. Subsurface will then add GPS data to those dives that didn't have GPS information and are reasonably close in time to to markers saved by the companion app.
Please note that the companion apps by themselves do <em>not</em> add dives to your dive list. The dive needs to exist before GPS data is added to it.
[/expand]
[expand title="How can I use more than one tank with the same gas?"]
This is a typical question for side mount divers or some tec divers. Subsurface supports having more than one tank with the same gas, even if some dive computers don't. Simply add a gas change to your second tank of the same gas as both tanks will be included in the gas use calculations. In order to add gas changes simply right-click on the profile at the appropriate spot and you will be offered to add such an event.
[/expand]
[expand title="Why is Subsurface not able to download my dives?"]
Clean the contacts. Clean the contacts again. Make sure the connector is firmly connected. Wiggle it. Seriously. Make sure the dive computer is in transfer mode (this isn't necessary for all dive computers but for many common ones). Check with other software that the download works in general. Try another cable. See our user manual for pairing with BT and the general use case.
[/expand]
[expand title="Why is the CSV import failing?"]
The CSV import has a couple of caveats. You should avoid some special characters like ampersand (&), less than (<), greater than (>) and double quotes ("), the latter if quoting text cells. The file should use UTF-8 character set, if having non-ASCII characters. Also the size of the CSV file might cause problems. Importing 100 dives at a time (without dive profile) has worked previously, but larger files might exceed limits of the parser used. When having problems with CSV imports, try first with a smaller sample to make sure everything works.
[/expand]
[expand title="How can I use Subsurface for multiple users?"]
Store logs of different users to separate log files. From Subsurface, you can open individual files for different divers and multiple users are supported quite well.
[/expand]
[expand title="How can I load pictures and associate them with my dive?"]
Select the dives you want to load and associate the pictures with. Then right click on one of the selected dives and select "Load images" from the
popup menu. This will bring in a file selection dialog where you can select one or multiple pictures. When the selection is done and you hit Open, you get a new dialog where you can shift the times of the images. This is described in more detail in our user manual.
If you are having trouble with loading the images, check that you have at least one of the following tags in the Exif headers DateTimeOriginal or
DateTime. We take the time from these fields to detect if the image was shot during the dive or not. If the picture is edited, you should store the original Exif information on the new/edited image for it to be loaded properly.
[/expand]
[expand title="Can I import my dives from my old log software?"]
Many common programs are already supported and we are always happy to try to add new ones. If your old log software supports exporting the log book, we might well be able to import that (for example via CSV files or UDDF). However, usually support for importing the native format will help you to get more complete information into Subsurface. To implement support for the log format, we will need a sample log file. It would be great to have also a screenshot from the original log software or description of the dive that is shown on the sample log. Preferably we would like to have a reasonably simple dive to get basic support and another dive that has as many features enabled as possible (e.g. gas changes during the dive). Please post this information to the user forum or send it to the developer mailing list subsurface@subsurface-divelog.org. Unfortunately some of the log formats we have not been able to decipher (as some vendors have decided to encrypt their log files to increase the degree of lock-in of their customers), so there are no guarantees that this will bring support for your old log software, but it is worth a try.
[/expand]
[expand title="Can you add support for dive computer X?"]
We support a large number of dive computers already and are always happy to add support for more. Please contact us via the user forums so we can try to help. Some vendors have actively helped us in our work and adding support for new models from those vendors is usually easy. Other vendors are more neutral, some are actively hostile. Without help from the vendor it can be rather challenging to reverse engineer the transfer protocol and the dive encoding, but with sufficient help from you it is often possible to do so.
A good starting point is often to send us a libdivecomputer log and dump (you can pick those in the dive computer download dialog) when connecting to the dive computer using a similar existing model (if possible).
[/expand]
[expand title="Is there a virus in the Subsurface installer?"]
If you get a warning message or if Subsurface is blocked by your anti virus software, that is almost certainly a false positive. Subsurface is not built on a Windows machine, it is cross built from source on Linux on a well maintained and clean server.
Most/all Windows AV software packages support an "add exception" feature, which skips an executable from being scanned. Try adding Subsurface to the list of non-harmful software. If the Subsurface installer download is detected as malware, please temporary disable your AV software until Subsurface is installed
In either case, please inform your AV software vendor of a "false positive" as we assure your that Subsurface is not malware
[/expand]
[expand title="I cannot download all my dives, only the most recent ones even though my dive computer's manual states that it records history of e.g. 999 dives."]
Dive history is different than the dive profiles on the log. The history only keeps track of the total number of dives and total amount of time spent below surface. The logs, on the other hand, store the dive profile, but they have limited amount of memory to do so. The exact amount of dive profiles that can be stored on the device depend on sample interval and duration of the dives. Once the memory is full the oldest dives get overwritten with new dives. Thus we are only able to download the last 13, 30 or 199 dives.
If you have downloaded your dives to different dive logging software before they were overwritten, there is a high change that Subsurface can import these. However, if the logs are only on your dive computer, they cannot be salvaged after being over written by new dives.
[/expand]
[expand title="How do I download dives from my Bluetooth dive computer (e.g. Shearwater, OSTC) on Linux?"]
Downloading dives over Bluetooth on all platforms is done using the "Choose Bluetooth download mode" option when downloading dives, and pairing with the detected dive computer. This is further explained in the <a href="https://subsurface-divelog.org/documentation/subsurface-4-user-manual/">Subsurface User Manual</a>.
Previous versions of Subsurface required setting up an RFCOMM connection from the command line before downloading dives from a Bluetooth enabled dive computer. This is no longer the case.
[/expand]
[expand title="How do I fix permission errors when trying to download from my Atomics Aquatics Cobalt under Linux?"]
Sadly this is a somewhat difficult process on some versions of Linux. By default new devices are sometimes given permissions that prevent a regular user from accessing them. If you get a permission error when trying to download from a Cobalt or Cobalt 2 under Linux, please try these steps.
This should work on most Linux flavors. We'd appreciate feedback if this doesn't work for you. Open a terminal window and cut and paste the following command. It may ask you to enter your password in order to allow access as super user (which is required to set up the udev rule that changes the device permissions as you plug in your Cobalt).
<pre><code style="font-size: 8pt;">(MYGRP=$(id | sed "s/^.*gid=.*(\(.*\)) .*$/\1/") ; \
If you disconnect and reconnect your Cobalt it should now get the correct access permissions.
[/expand]
[expand title="How do I fix permission errors when trying to download from my Suunto EON Steel under Linux?"]
By default new devices are sometimes given permissions that prevent a regular user from accessing them. If you get a permission error when trying to download from an EON Steel under Linux, please try these steps.
This should work on most Linux flavors. We'd appreciate feedback if this doesn't work for you. Open a terminal window and cut and paste the following command. It may ask you to enter your password in order to allow access as super user (which is required to set up the udev rule that changes the device permissions as you plug in your EON Steel).
sudo tee /etc/udev/rules.d/99-cobalt.rules </code></pre>
If you disconnect and reconnect your DC it should now get the correct access permissions.
[/expand]
[expand title="Why is my IRDA based dive computer not working on a MAC?"]
Subsurface on the Mac does not currently support IRDA based dive computers. This is an issue of missing support libraries for us to use - other dive log software may have implemented their own IRDA stack on the Mac, we have not. Subsurface on Windows and Linux does support IRDA based dive computers just fine.
<div class="paragraph"><p>This is usually the approach for dives without a dive computer. The basic record
of information within <em>Subsurface</em> is a dive. The most important information
in a simple dive logbook usually includes dive type, date, time, duration,
depth, the names of your dive buddy and the divemaster or dive guide, and
depth, the names of your dive buddy and the dive guide, and
some remarks about the dive. <em>Subsurface</em> can store much more
information for each dive. To add a dive to a dive log, select <em>Log
→ Add Dive</em> from the Main Menu. The program then shows three panels
@ -882,6 +882,15 @@ Do <strong>not</strong> check the checkboxes labelled <em>Save libdivecomputer l
</li>
<li>
<p>
With some dive computers it is possible to adjust the clock on the dive
computer based on the PC clock. This can be very helpful when dealing with
daylight savings time changes, or when travelling between different time
zones. In order to synchronise the dive computer clock with the PC clock
every time dives are imported, check <em>Sync dive computer time</em>.
</p>
</li>
<li>
<p>
Then select the <em>Download</em> button.
With communication established, you can see how the data are
retrieved from the dive computer.
@ -1163,12 +1172,11 @@ you might like to call one "Alice’s Suunto D4" and the other
"Bob’s Suunto D4". Alternatively, consider a technical diver who dives with two or more
dive computers of the same model, the logs of both (or all) being uploaded.
In this case it might be prudent to call one of them
"Suunto D4 (1)" and another "Suunto D4 (2)". This is easily done in <em>Subsurface</em>.
On the <strong>Main Menu</strong>, select <em>Log → Edit device names</em>. A dialog box opens, showing the
current Model, ID and Nickname of the dive computers used for upload. Edit the Nickname
field for the appropriate dive computer. After saving the Nickname, the dive logs
show the nickname for that particular device instead of the model name,
allowing easy identification of devices.</p></div>
"Suunto D4 (1)" and another "Suunto D4 (2)".</p></div>
<div class="paragraph"><p>To achieve this, display a dive downloaded from this dive computer, right click on its name
in the profile and select the option to set a new nickname. If this option isn’t shown, then
Subsurface cannot reliably identify this specific dive computer (not all models support this
feature, but most modern ones do).</p></div>
</div>
<div class="sect3">
<h4 id="S_MultipleDiveComputers">4.2.4. Uploading data for a specific dive from more than one dive computer</h4>
@ -1209,7 +1217,7 @@ increase in the amount of information stored for a dive.</p></div>
<p>
The <strong>Notes</strong> tab
holds basic information about the dive, the date and time, locality,
buddy, divemaster and some dive notes. This is about the minimum amount of
buddy, dive guide and some dive notes. This is about the minimum amount of
information required for a coherent dive log.
</p>
</li>
@ -1285,7 +1293,7 @@ to a specific dive and changes to multiple dives can be undone.</p></div>
<td class="content">Dive locations are managed as a <strong>separate</strong> part of the dive log (See the section entitled <a href="#S_DiveSiteManagement">Manipulating Dive Site Information</a>).
The dive information in the <strong>Notes</strong> and <strong>Equipment</strong> tabs can therefore NOT be edited at the same
time as the dive site information. Save all the other dive information (e.g.
divemaster, buddy, protective gear, notes about the dive) by selecting <em>Apply changes</em> on the
dive guide, buddy, protective gear, notes about the dive) by selecting <em>Apply changes</em> on the
<strong>Notes</strong> tab BEFORE editing the dive site information. Then supply a dive site name in the
textbox labelled <em>Location</em> on the <strong>Notes</strong> tab.</td>
</tr></table>
@ -1335,11 +1343,6 @@ data here are the geographic coordinates of the dive location.</p></div>
</li>
<li>
<p>
<a href="#S_Subsurface_mobile">Dive site coordinates from the Subsurface-Mobile phone app</a>
</p>
</li>
<li>
<p>
<a href="#S_GPS">Dive site coordinates from a GPS track</a>
</p>
</li>
@ -1395,13 +1398,7 @@ dive site name in the <strong>Notes tab</strong>.</p></div>
</div>
<div class="paragraph"><p>Once the dive location data have been saved, the dive on the Dive List has
a globe icon immediately to the left of the location name of a particular dive.</p></div>
<div class="paragraph" id="S_Using_mobile"><p><strong>(3): Dive coordinates from a mobile device with GPS using Subsurface-Mobile.</strong>
Most smartphones have an integrated GPS, useful for collecting the coordinates of dive sites.
The <a href="https://subsurface-divelog.org/documentation/subsurface-mobile-user-manual">user manual for <em>Subsurface-mobile</em></a> (accessible from within that app)
contains detailed instructions for
performing the collection of GPS data and for managing, uploading and
synchronising the coordinates with a dive log.</p></div>
<div class="paragraph" id="S_GPS"><p><strong>(4): Import coordinates from GPS equipment.</strong> Some divers prefer to take a GPS
<div class="paragraph" id="S_GPS"><p><strong>(3): Import coordinates from GPS equipment.</strong> Some divers prefer to take a GPS
onto the boat and record a GPS track while diving. Subsurface can extract the
dive site from this track and store the dive site coordinates as part of the dive log.
Follow the next steps:</p></div>
@ -1496,9 +1493,8 @@ The dive site information can later be edited by clicking the globe icon to the
dive site name in the <strong>Notes tab</strong>.</p></div>
<div class="paragraph"><p>Having entered information about the dive site into the <strong>Notes</strong> tab, the following
additional information can be typed in:</p></div>
<div class="paragraph"><p><strong>Divemaster</strong>: The name of the divemaster or dive guide should be
entered in this field
which offers auto selection based on the list of divemasters in
<div class="paragraph"><p><strong>Dive guide</strong>: The name of the dive guide should be entered in this field
which offers auto selection based on the list of dive guides in
the current logbook.</p></div>
<div class="paragraph"><p><strong>Buddy</strong>: In this field, enter the name(s) of the buddy or buddies
(separated with commas) who were on the
@ -1773,7 +1769,7 @@ and gas composition). Other fields remain empty.
It may be useful to simultaneously edit some of the
fields in the <strong>Notes</strong> and <strong>Equipment</strong> tabs. For instance, it’s possible
that a diver performed several dives during a single day, using identical equipment at the same
dive site, or with the same divemaster and/or buddy or tags. Instead
dive site, or with the same dive guide and/or buddy or tags. Instead
of completing the information for each
dive separately, select all the dives for that day in the <strong>Dive List</strong> and
insert the same information in the <strong>Notes</strong> and <strong>Equipment</strong> fields that need
@ -2217,7 +2213,7 @@ columns, followed by the data, one record per line.</p></div>
<p>
<em>CSV dive details</em>: This dive log format contains similar information to that of a
typical written dive log, e.g. dive date and time, dive depth, dive duration, names of
buddy and divemaster and information about cylinder pressures before and
buddy and dive guide and information about cylinder pressures before and
after the dive, as well as comments about the dive. All the data for a single
dive go on a single line of text, following the order of the column headings.
</p>
@ -2448,6 +2444,7 @@ A list of sites within this range is presented (see image below).</p></div>
<div class="paragraph"><p>Select the dive site to be merged by right-clicking it. A confirmation
message is presented (see image above). Clicking the confirmation message merges the selected dive with
the dive named at the top of the panel and returns you to the dive sites management panel.</p></div>
<div class="paragraph"><p>Alternatively, if exactly one dive site is selected in the <em>Near dive sites</em> list, there is an additional function <em>Merge current site into this site</em> available in the context menu. This can be helpful if the name of the destination dive site is not known, e.g. when importing dive sites from a third party source.</p></div>
</div>
<div class="sect3">
<h4 id="_add_a_dive_site">4.4.4. Add a dive site</h4>
@ -2829,7 +2826,36 @@ logging of cylinder pressures during sidemount involves three steps, exactly as
@ -3313,6 +3339,14 @@ buttons on the left of the profile panel. These are:</p></div>
<div class="admonitionblock">
<table><tr>
<td class="icon">
<img src="images/icons/InfoBox.png" alt="Note" />
</td>
<td class="content">Show or hide the <strong>Information Box</strong>. This allows the Information Box to be hidden in order to see the entire dive profile without any obstructions.</td>
</tr></table>
</div>
<div class="admonitionblock">
<table><tr>
<td class="icon">
<img src="images/icons/MOD.jpg" alt="Note" />
</td>
<td class="content">Show the <strong>Maximum Operating Depth (MOD)</strong> of the dive, given the
@ -3840,7 +3874,7 @@ restored to view by selecting Unhide all events from the context menu.</p></div>
<div class="sect2">
<h3 id="S_Filter">5.6. Filtering the dive list</h3>
<div class="paragraph"><p>The dives in the <strong>Dive List</strong> can be filtered, selecting only some
of the dives based on attributes such as dive tags, dive site, divemaster or buddy.
of the dives based on attributes such as dive tags, dive site, dive guide or buddy.
For instance, filtering lets you list the dives during a particular year at a specific
dive site, or otherwise the cave dives with a particular buddy. Filtering can be performed
based on virtually any information in the <strong>Info</strong> panel.</p></div>
@ -4466,7 +4500,7 @@ Universal Dive Data Format (<em>UDDF</em>). Refer to <em>http://uddf.org</em> fo
</li>
</ul></div>
<div class="paragraph"><p>When the "Anonymize" option is selected for xml-based file formats, the letters A-Z
are all replaced by the letter <em>X</em> in the notes, buddy, divemaster, divesite name
are all replaced by the letter <em>X</em> in the notes, buddy, dive guide, divesite name
and divesite description fields. This way, you can share dive log files for debugging
purposes without revealing personal information. Please note, though, that other
characters are not replaced, so this is not useful for languages with non-latin
@ -5096,6 +5130,8 @@ the log.</p></div>
<p>
<strong>Show unused cylinders</strong>: Checking this checkbox allows showing all cylinders entered for a dive
in the Cylinder Table of the <strong>Equipment</strong> tab, even if one or more cylinders were actually not used.
This will also include unused cylinders in data exports and when dives are cloned for the planner
or merged into one dive.
</p>
</li>
</ul></div>
@ -5130,12 +5166,12 @@ the log.</p></div>
<div class="sect2">
<h3 id="_tech_setup">12.8. Tech setup</h3>
<div class="paragraph"><p>This tab sets common variables used for decompression calculations pertaining to technical diving.</p></div>
@ -7581,14 +7616,11 @@ a template, select one of the templates from the template dropdown list in the p
<div class="paragraph"><p>2) The <em>Colors</em> tab (image <strong>B</strong> above) allows editing the colors used for printing the dive log. The colors are highly
customizable: the <em>Edit</em> buttons in the <em>Colors</em> tab allows choosing arbitrary colors for different
components of the dive log printout.</p></div>
<div class="paragraph"><p>3) The <em>Template</em> tab of the Edit Panel (see image below) allows creating a template using HTML as well as a few
Grantlee programming primitives. Grantlee can create and format HTML code in
a highly simple but efficient way (see below). The HTML of the template can be edited and saved. The saved
template is stored in the same directory as the dive being processed. By default, a <em>Custom</em>
template is a skeleton with no specific print instructions. The information printed
needs to be specified and formatted in the template by replacing the section marked with:
"<!-- Template must be filled -→". Writing HTML code with Grantlee instructions allows unlimited
freedom in determining what is printed and in which way it should be rendered.</p></div>
<div class="paragraph"><p>3) The <em>Template</em> tab of the Edit Panel (see image below) allows creating a template using HTML. The HTML of the
template can be edited and saved. The saved template is stored in the same directory as the dive being processed.
By default, a <em>Custom</em> template is a skeleton with no specific print instructions. The information printed needs to
be specified and formatted in the template by replacing the section marked with:
"<!-- Template must be filled -→".</p></div>
@ -7600,7 +7632,8 @@ dialog to save the new template using a new template name.</p></div>
<div class="paragraph"><p>To write a custom template, the following elements must exist so the template will be correctly handled and rendered.</p></div>
<div class="sect2">
<h3 id="_main_dive_loop">20.1. Main dive loop</h3>
<div class="paragraph"><p><em>Subsurface</em> exports a dive list called (<strong>dives</strong>) to the <em>Grantlee</em> back end. It is possible to iterate over the list as follows:
<div class="paragraph"><p><em>Subsurface</em> exports a dive list called (<strong>dives</strong>) as well as a list of cylinders called (<strong>cylinderObjects</strong>) to the back end. It is
possible to iterate over the list as follows:
.template.html</p></div>
<div class="literalblock">
<div class="content">
@ -7615,10 +7648,9 @@ dialog to save the new template using a new template name.</p></div>
<h1> 2 </h1>
<h1> 3 </h1></code></pre>
</div></div>
<div class="paragraph"><p>Additional information about <em>Grantlee</em> can be found <a href="http://www.grantlee.org/apidox/for_themers.html">here</a></p></div>
<td align="left" valign="top"><p class="table">(<strong>int</strong>) nitrogen percentage of gas mix</p></td>
</tr>
</tbody>
</table>
</div>
<div class="paragraph"><p>Please note that some of the variables like <em>notes</em> need to be extended with <em>|safe</em> to support HTML tags:</p></div>
@ -34,7 +34,7 @@ https://subsurface-divelog.org/[_Subsurface_ web site].
Please discuss issues with this program by sending an email to
mailto:subsurface@subsurface-divelog.org[our mailing list] and report bugs at
https://github.com/Subsurface/subsurface/issues[our bugtracker]. For instructions on how to build the
software and (if needed) its dependencies please consult the INSTALL file
software and (if needed) its dependencies please consult the INSTALL.md file
included with the source code.
*Audience*: Recreational Scuba Divers, Free Divers, Tec Divers, Professional
@ -178,7 +178,7 @@ These dives can be imported from:
This is usually the approach for dives without a dive computer. The basic record
of information within _Subsurface_ is a dive. The most important information
in a simple dive logbook usually includes dive type, date, time, duration,
depth, the names of your dive buddy and the divemaster or dive guide, and
depth, the names of your dive buddy and the dive guide, and
some remarks about the dive. _Subsurface_ can store much more
information for each dive. To add a dive to a dive log, select _Log
-> Add Dive_ from the Main Menu. The program then shows three panels
@ -374,6 +374,13 @@ of the dive computer (at least for those not charging while connected via USB).
- Do *not* check the checkboxes labelled _Save libdivecomputer logfile_ and
_Save libdivecomputer dumpfile_. These are only used as diagnostic tools
when there are problems with downloads(see below).
- With some dive computers it is possible to adjust the clock on the dive
computer based on the PC clock. This can be very helpful when dealing with
daylight savings time changes, or when travelling between different time
zones. In order to synchronise the dive computer clock with the PC clock
every time dives are imported, check _Sync dive computer time_.
- Then select the _Download_ button.
With communication established, you can see how the data are
retrieved from the dive computer.
@ -398,6 +405,7 @@ of the dive computer (at least for those not charging while connected via USB).
(Puck Pro)". Refer to the text in the box below.
****
*PROBLEMS WITH DATA DOWNLOAD FROM A DIVE COMPUTER?*
[icon="images/icons/important.png"]
@ -591,12 +599,12 @@ you might like to call one "Alice's Suunto D4" and the other
"Bob's Suunto D4". Alternatively, consider a technical diver who dives with two or more
dive computers of the same model, the logs of both (or all) being uploaded.
In this case it might be prudent to call one of them
"Suunto D4 (1)" and another "Suunto D4 (2)". This is easily done in _Subsurface_.
On the *Main Menu*, select _Log -> Edit device names_. A dialog box opens, showing the
current Model, ID and Nickname of the dive computers used for upload. Edit the Nickname
field for the appropriate dive computer. After saving the Nickname, the dive logs
show the nickname for that particular device instead of the model name,
allowing easy identification of devices.
"Suunto D4 (1)" and another "Suunto D4 (2)".
To achieve this, display a dive downloaded from this dive computer, right click on its name
in the profile and select the option to set a new nickname. If this option isn't shown, then
Subsurface cannot reliably identify this specific dive computer (not all models support this
feature, but most modern ones do).
[[S_MultipleDiveComputers]]
==== Uploading data for a specific dive from more than one dive computer
@ -635,7 +643,7 @@ increase in the amount of information stored for a dive.
1. The *Notes* tab
holds basic information about the dive, the date and time, locality,
buddy, divemaster and some dive notes. This is about the minimum amount of
buddy, dive guide and some dive notes. This is about the minimum amount of
information required for a coherent dive log.
2. If one wishes, one can expand the dive information by using the
@ -701,7 +709,7 @@ image::images/undo.jpg["FIGURE:Performing an undo",align="center"]
Dive locations are managed as a *separate* part of the dive log (See the section entitled xref:S_DiveSiteManagement[Manipulating Dive Site Information]).
The dive information in the *Notes* and *Equipment* tabs can therefore NOT be edited at the same
time as the dive site information. Save all the other dive information (e.g.
divemaster, buddy, protective gear, notes about the dive) by selecting _Apply changes_ on the
dive guide, buddy, protective gear, notes about the dive) by selecting _Apply changes_ on the
*Notes* tab BEFORE editing the dive site information. Then supply a dive site name in the
textbox labelled _Location_ on the *Notes* tab.
@ -734,8 +742,7 @@ New dive locations can be recorded in one of four ways:
1. xref:S_existing_locations[Typing in known coordinates by hand]
2. xref:S_dive_map_location[Positioning the dive site flag on the dive map]
3. xref:S_Subsurface_mobile[Dive site coordinates from the Subsurface-Mobile phone app]
4. xref:S_GPS[Dive site coordinates from a GPS track]
3. xref:S_GPS[Dive site coordinates from a GPS track]
[[S_existing_locations]]
*(1): Enter coordinates by hand* if they are known, using one of
Once the dive location data have been saved, the dive on the Dive List has
a globe icon immediately to the left of the location name of a particular dive.
[[S_Subsurface_mobile]]
[[S_Using_mobile]]
*(3): Dive coordinates from a mobile device with GPS using Subsurface-Mobile.*
Most smartphones have an integrated GPS, useful for collecting the coordinates of dive sites.
The https://subsurface-divelog.org/documentation/subsurface-mobile-user-manual[user manual for _Subsurface-mobile_] (accessible from within that app)
contains detailed instructions for
performing the collection of GPS data and for managing, uploading and
synchronising the coordinates with a dive log.
[[S_GPS]]
*(4): Import coordinates from GPS equipment.* Some divers prefer to take a GPS
*(3): Import coordinates from GPS equipment.* Some divers prefer to take a GPS
onto the boat and record a GPS track while diving. Subsurface can extract the
dive site from this track and store the dive site coordinates as part of the dive log.
Follow the next steps:
@ -863,9 +861,8 @@ dive site name in the *Notes tab*.
Having entered information about the dive site into the *Notes* tab, the following
additional information can be typed in:
*Divemaster*: The name of the divemaster or dive guide should be
entered in this field
which offers auto selection based on the list of divemasters in
*Dive guide*: The name of the dive guide should be entered in this field
which offers auto selection based on the list of dive guides in
the current logbook.
*Buddy*: In this field, enter the name(s) of the buddy or buddies
@ -1107,7 +1104,7 @@ and gas composition). Other fields remain empty.
It may be useful to simultaneously edit some of the
fields in the *Notes* and *Equipment* tabs. For instance, it’s possible
that a diver performed several dives during a single day, using identical equipment at the same
dive site, or with the same divemaster and/or buddy or tags. Instead
dive site, or with the same dive guide and/or buddy or tags. Instead
of completing the information for each
dive separately, select all the dives for that day in the *Dive List* and
insert the same information in the *Notes* and *Equipment* fields that need
@ -1443,7 +1440,7 @@ There are two types of _CSV_ dive logs that can be imported into _Subsurface_:
1. _CSV dive details_: This dive log format contains similar information to that of a
typical written dive log, e.g. dive date and time, dive depth, dive duration, names of
buddy and divemaster and information about cylinder pressures before and
buddy and dive guide and information about cylinder pressures before and
after the dive, as well as comments about the dive. All the data for a single
dive go on a single line of text, following the order of the column headings.
@ -1643,6 +1640,8 @@ Select the dive site to be merged by right-clicking it. A confirmation
message is presented (see image above). Clicking the confirmation message merges the selected dive with
the dive named at the top of the panel and returns you to the dive sites management panel.
Alternatively, if exactly one dive site is selected in the 'Near dive sites' list, there is an additional function 'Merge current site into this site' available in the context menu. This can be helpful if the name of the destination dive site is not known, e.g. when importing dive sites from a third party source.
==== Add a dive site
At the top right of the dive sites management table is a round button with a "+". Clicking that button inserts a
@ -1944,6 +1943,29 @@ logging of cylinder pressures during sidemount involves three steps, exactly as
<div class="paragraph"><p>Décider quels panneaux sont affichés, parmi les 4, en sélectionnant l’option
<strong>Vue</strong> dans le menu principal. Cette fonctionnalité permet plusieurs choix
d’affichage :</p></div>
<div class="paragraph"><p><strong>Tout</strong> : affiche les quatre panneaux tels que sur la capture d'écran ci-dessus.</p></div>
<div class="paragraph"><p><strong>Tout</strong> : affiche les quatre panneaux tels que sur la capture d’écran ci-dessus.</p></div>
<div class="paragraph"><p><strong>Liste des plongées</strong> : affiche uniquement la liste des plongées.</p></div>
<div class="paragraph"><p><strong>Profil</strong> : affiche uniquement le profile de plongée de la plongée sélectionnée.</p></div>
<div class="paragraph"><p><strong>Info</strong> : affiche uniquement les notes de plongées de la dernière plongée sélectionnée et les statistiques pour
@ -761,7 +762,7 @@ doit être enregistré sur le disque ou non.</p></div>
<div class="paragraph"><p>Le <strong>Profil de plongée</strong> (une représentation graphique de la profondeur d’une
plongée en fonction du temps) est affiché dans le panneau en haut à droite
de la fenêtre de <em>Subsurface</em>. Lorsqu’il est ajouté manuellement au carnet,
<em>Subsurface</em> affiche un profil de plongée par défaut qui nécessite d'être
<em>Subsurface</em> affiche un profil de plongée par défaut qui nécessite d’être
modifié pour représenter au mieux la plongée décrite:</p></div>
<img src="images/facebook2.jpg" alt="Figure: Facebook data submission" />
</div>
</div>
<div class="paragraph"><p>If required, then close the <em>Facebook</em> connection by selecting, from the
<strong>Main Menu</strong>, <em>Share on → Disconnect from → Facebook</em> (image <strong>B</strong> above).</p></div>
</div>
<div class="sect2">
<h3 id="S_Export_other">8.2. Exporter des informations de plongée vers d’autres destinations ou formats</h3>
<h3 id="S_Export_other">8.1. Exporter des informations de plongée vers d’autres destinations ou formats</h3>
<div class="paragraph"><p>For non-<em>Facebook exports</em>, the export function can be found by selecting
<em>File → Export</em>, which brings up the Export dialog. This dialog always
gives two options: save ALL dives, or save only the dives selected in <strong>Dive
@ -4600,7 +4544,7 @@ ces ordinateurs de plongée peuvent être lues et modifiées. Pour commencer,
assurez vous que les pilotes pour votre ordinateur de plongée sont installés
(également nécessaire pour télécharger les plongées) et que le nom de
périphérique de l’ordinateur de plongée est connu. Voir
<a href="#_appendix_a_operating_system_specific_information_for_importing_dive_information_from_a_dive_computer">ANNEXE A</a> pour plus d’informations sur la manière de procéder.</p></div>
<a href="#appendix_a">ANNEXE A</a> pour plus d’informations sur la manière de procéder.</p></div>
<div class="paragraph"><p>Une fois que l’ordinateur de plongée est connecté à <em>Subsurface</em>,
sélectionner <em>Fichier → Configurer l’ordinateur de plongée</em>, à partir du
menu principal. Sélectionner le nom du périphérique (ou le point de montage)
@ -5035,7 +4979,7 @@ L’utilisateur planifie des plongées dans les limites de sa certification.
<li>
<p>
La planification de plongée se base sur les caractéristiques d’une <em>personne
normale</em> et ne peut compenser les caractéristiques physiologiques, l'état de
normale</em> et ne peut compenser les caractéristiques physiologiques, l’état de
santé, l’historique personnel et les caractéristiques du mode de vie.
</p>
</li>
@ -5059,7 +5003,7 @@ Un utilisateur qui n’est pas absolument certain d’un des prérequis
</ul></div>
</div></div>
<div class="sect2">
<h3 id="_l_écran_du_planificateur_de_plongée_em_subsurface_em">14.1. L'écran du planificateur de plongée <em>Subsurface</em></h3>
<h3 id="_l_8217_écran_du_planificateur_de_plongée_em_subsurface_em">14.1. L’écran du planificateur de plongée <em>Subsurface</em></h3>
<div class="paragraph"><p>Like the <em>Subsurface</em> dive log, the planner screen is divided into several
sections (see image below). The <strong>setup</strong> parameters for a dive are entered
into the sections on the left hand and bottom side of the screen. They are:
@ -6162,18 +6106,7 @@ The Edit option allows one to undo or redo an action, e.g. deleting dives.
</ul></div>
</div>
<div class="sect2">
<h3 id="_share_on">16.6. Share on</h3>
<div class="ulist"><ul>
<li>
<p>
<a href="#S_Facebook"><em>Facebook</em></a> - Partager la plongée sélectionnée sur votre
Facebook.
</p>
</li>
</ul></div>
</div>
<div class="sect2">
<h3 id="_aide">16.7. Aide</h3>
<h3 id="_aide">16.6. Aide</h3>
<div class="ulist"><ul>
<li>
<p>
@ -6205,7 +6138,7 @@ The Edit option allows one to undo or redo an action, e.g. deleting dives.
</div>
</div>
<div class="sect1">
<h2 id="_annexe_a_informations_spécifiques_au_système_d_8217_exploitation_utilisé_pour_importer_les_informations_de_plongées_depuis_un_ordinateur_de_plongée">17. ANNEXE A : informations spécifiques au système d’exploitation utilisé pour importer les informations de plongées depuis un ordinateur de plongée.</h2>
<h2 id="appendix_a">17. ANNEXE A : informations spécifiques au système d’exploitation utilisé pour importer les informations de plongées depuis un ordinateur de plongée.</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_assurez_vous_que_les_pilotes_drivers_nécessaires_sont_installés">17.1. Assurez-vous que les pilotes (drivers) nécessaires sont installés</h3>
@ -6315,14 +6248,14 @@ ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver</code></pre>
détecté et connecté sur <code>ttyUSB3</code>. Cette information peut à présent être
utilisée pour les paramètres d’importation en tant que <code>/dev/ttyUSB3</code> pour
que Subsurface utilise le bon port USB.</p></div>
<div class="paragraph"><p>S’assurer que l’utilisateur possède les droits d'écriture sur le port série
<div class="paragraph"><p>S’assurer que l’utilisateur possède les droits d’écriture sur le port série
USB :</p></div>
<div class="paragraph"><p>Sur les systèmes similaires à Unix, les ports USB ne peuvent être accédés
que par des utilisateurs membres d’un groupe spécial qui peut être <code>dialout</code>
ou <code>uucp</code>. Cela peut être vérifié en listant les permissions associées au
périphérique, par exemple via <code>ls - l /dev/ttyUSB0</code>. Notez que le numéro
dans le nom de fichier dépend du nombre de périphériques USB que vous avez
branchés et peut être ajusté au besoin.Si vous n'êtes pas root, vous n'êtes
branchés et peut être ajusté au besoin.Si vous n’êtes pas root, vous n’êtes
peut-être pas membre de ce groupe et ne pouvez donc pas utiliser le port
USB. Admettons que votre nom d’utilisateur soit <em>johnB</em>.</p></div>
<div class="paragraph"><p>En tant que root, tapez : usermod -a -G dialout johnB+ (utilisateurs
@ -7854,7 +7787,7 @@ salvaged after being overwritten by new dives.</p></div>
### Cross-building Subsurface on Linux for Windows
Subsurface for Windows builds on linux by using the [MXE (M cross environment)](https://github.com/mxe/mxe). The easiest way to do this is to use a Docker container with a pre-built MXE for Subsurface by following [these instructions](packaging/windows/README.md).
### Building Subsurface on Windows
This is NOT RECOMMENDED. To the best of our knowledge there is one single
person who regularly does this. The Subsurface team does not provide support
for Windows binary build from sources natively under Windows...
The lack of a working package management system for Windows makes it
really painful to build Subsurface natively under Windows,
so we don't support that at all.
But if you want to build Subsurface on a Windows system, the docker based [cross-build for Windows](packaging/windows/README.md) works just fine in WSL2 on Windows.
### Cross-building Subsurface on Linux for Android
Subsurface can be found at http://subsurface-divelog.org
@ -24,15 +21,9 @@ Report bugs and issues at https://github.com/Subsurface/subsurface/issues
License: GPLv2
We frequently make new test versions of Subsurface available at
http://subsurface-divelog.org/downloads/test/ and there you can always get
the latest builds for Mac, Windows, Linux AppImage and Android (with some
caveats about installability). Additionally, those same versions are
posted to the Subsurface-daily repos on Launchpad and OBS.
These tend to contain the latest bug fixes and features, but also
occasionally the latest bugs and issues. Please understand when using them
that these are primarily intended for testing.
We are releasing 'nightly' builds of Subsurface that are built from the latest version of the code. Versions of this build for Windows, macOS, Android (requiring sideloading), and a Linux AppImage can be downloaded from the [Latest Dev Release](https://www.subsurface-divelog.org/latest-release/) page on [our website](https://www.subsurface-divelog.org/). Alternatively, they can be downloaded [directly from GitHub](https://github.com/subsurface/nightly-builds/releases). Additionally, those same versions are
posted to the Subsurface-daily repos on Ubuntu Launchpad, Fedora COPR, and
OpenSUSE OBS, and released to [Snapcraft](https://snapcraft.io/subsurface) into the 'edge' channel of subsurface.
You can get the sources to the latest development version from the git
You can also fork the repository and browse the sources at the same site,
simply using https://github.com/Subsurface/subsurface
If you want the latest release (instead of the bleeding edge
development version) you can either get this via git or the release tar
ball. After cloning run the following command:
Additionally, artifacts for Windows, macOS, Android, Linux AppImage, and iOS (simulator build) are generated for all open pull requests and linked in pull request comments. Use these if you want to test the changes in a specific pull request and provide feedback before it has been merged.
```
git checkout v5.0.2 (or whatever the last release is)
```
If you want a more stable version that is a little bit more tested you can get this from the [Curent Release](https://www.subsurface-divelog.org/current-release/) page on [our website](https://www.subsurface-divelog.org/).
or download a tarball from http://subsurface-divelog.org/downloads/Subsurface-5.0.2.tgz
Detailed build instructions can be found in the INSTALL file.
Detailed build instructions can be found in the [INSTALL.md](/INSTALL.md) file.
<li>Atom 1.0, Atom 2.0, Atom 3.0, Atom 3.1, Datamask, F10, F11, Geo, Geo 2.0, Geo 4.0, OC1, OCS, OCi, Pro Plus 2, Pro Plus 2.1, Pro Plus 3, Pro Plus 4, Pro Plus X, VT 4.1, VT Pro, VT3, VT4, VTX, Veo 1.0, Veo 180, Veo 2.0, Veo 200, Veo 250, Veo 3.0, Veo 4.0, Versa Pro</li></ul>
<li>Atom 1.0, Atom 2.0, Atom 3.0, Atom 3.1, Datamask, F10, F11, Geo, Geo 2.0, Geo 4.0, Geo Air, OC1, OCS, OCi, Pro Plus 2, Pro Plus 2.1, Pro Plus 3, Pro Plus 4, Pro Plus X, VT 4.1, VT Pro, VT3, VT4, VTX, Veo 1.0, Veo 180, Veo 2.0, Veo 200, Veo 250, Veo 3.0, Veo 4.0, Versa Pro</li></ul>
</dd>
<dt>Oceans</dt><dd><ul>
<li>S1</li></ul>
</dd>
<dt>Ratio</dt><dd><ul>
<li>iDive Color Deep, iDive Color Easy, iDive Color Fancy, iDive Color Free, iDive Color Pro, iDive Color Reb, iDive Color Tech+, iDive Deep, iDive Easy, iDive Fancy, iDive Free, iDive Pro, iDive Reb, iDive Tech+, iX3M 2021 GPS Deep, iX3M 2021 GPS Easy, iX3M 2021 GPS Fancy, iX3M 2021 GPS Pro , iX3M 2021 GPS Reb, iX3M 2021 GPS Tech+, iX3M 2021 Pro Deep, iX3M 2021 Pro Easy, iX3M 2021 Pro Fancy, iX3M 2021 Pro Pro, iX3M 2021 Pro Reb, iX3M 2021 Pro Tech+, iX3M GPS Deep, iX3M GPS Easy, iX3M GPS Fancy, iX3M GPS Pro , iX3M GPS Reb, iX3M GPS Tech+, iX3M Pro Deep, iX3M Pro Easy, iX3M Pro Fancy, iX3M Pro Pro, iX3M Pro Reb, iX3M Pro Tech+</li></ul>
<li>ATOM, iDive 2 Deep, iDive 2 Easy, iDive 2 Fancy, iDive 2 Free, iDive 2 Pro, iDive 2 Reb, iDive 2 Tech, iDive Color Deep, iDive Color Easy, iDive Color Fancy, iDive Color Free, iDive Color Pro, iDive Color Reb, iDive Color Tech+, iDive Deep, iDive Easy, iDive Fancy, iDive Free, iDive Pro, iDive Reb, iDive Tech+, iX3M 2 Deep, iX3M 2 Easy, iX3M 2 GPS Deep, iX3M 2 GPS Easy, iX3M 2 GPS Gauge, iX3M 2 GPS Pro, iX3M 2 GPS Reb, iX3M 2 GPS Tech, iX3M 2 Gauge, iX3M 2 Pro, iX3M 2 Tech+, iX3M 2021 GPS Deep, iX3M 2021 GPS Easy, iX3M 2021 GPS Fancy, iX3M 2021 GPS Pro , iX3M 2021 GPS Reb, iX3M 2021 GPS Tech+, iX3M 2021 Pro Deep, iX3M 2021 Pro Easy, iX3M 2021 Pro Fancy, iX3M 2021 Pro Pro, iX3M 2021 Pro Reb, iX3M 2021 Pro Tech+, iX3M GPS Deep, iX3M GPS Easy, iX3M GPS Fancy, iX3M GPS Pro , iX3M GPS Reb, iX3M GPS Tech+, iX3M Pro Deep, iX3M Pro Easy, iX3M Pro Fancy, iX3M Pro Pro, iX3M Pro Reb, iX3M Pro Tech+</li></ul>
Oceanic: Atom 1.0, Atom 2.0, Atom 3.0, Atom 3.1, Datamask, F10, F11, Geo, Geo 2.0, Geo 4.0, OC1, OCS, OCi, Pro Plus 2, Pro Plus 2.1, Pro Plus 3, Pro Plus 4, Pro Plus X, VT 4.1, VT Pro, VT3, VT4, VTX, Veo 1.0, Veo 180, Veo 2.0, Veo 200, Veo 250, Veo 3.0, Veo 4.0, Versa Pro
Oceanic: Atom 1.0, Atom 2.0, Atom 3.0, Atom 3.1, Datamask, F10, F11, Geo, Geo 2.0, Geo 4.0, Geo Air, OC1, OCS, OCi, Pro Plus 2, Pro Plus 2.1, Pro Plus 3, Pro Plus 4, Pro Plus X, VT 4.1, VT Pro, VT3, VT4, VTX, Veo 1.0, Veo 180, Veo 2.0, Veo 200, Veo 250, Veo 3.0, Veo 4.0, Versa Pro
Oceans: S1
Ratio: iDive Color Deep, iDive Color Easy, iDive Color Fancy, iDive Color Free, iDive Color Pro, iDive Color Reb, iDive Color Tech+, iDive Deep, iDive Easy, iDive Fancy, iDive Free, iDive Pro, iDive Reb, iDive Tech+, iX3M 2021 GPS Deep, iX3M 2021 GPS Easy, iX3M 2021 GPS Fancy, iX3M 2021 GPS Pro , iX3M 2021 GPS Reb, iX3M 2021 GPS Tech+, iX3M 2021 Pro Deep, iX3M 2021 Pro Easy, iX3M 2021 Pro Fancy, iX3M 2021 Pro Pro, iX3M 2021 Pro Reb, iX3M 2021 Pro Tech+, iX3M GPS Deep, iX3M GPS Easy, iX3M GPS Fancy, iX3M GPS Pro , iX3M GPS Reb, iX3M GPS Tech+, iX3M Pro Deep, iX3M Pro Easy, iX3M Pro Fancy, iX3M Pro Pro, iX3M Pro Reb, iX3M Pro Tech+
Ratio: ATOM, iDive 2 Deep, iDive 2 Easy, iDive 2 Fancy, iDive 2 Free, iDive 2 Pro, iDive 2 Reb, iDive 2 Tech, iDive Color Deep, iDive Color Easy, iDive Color Fancy, iDive Color Free, iDive Color Pro, iDive Color Reb, iDive Color Tech+, iDive Deep, iDive Easy, iDive Fancy, iDive Free, iDive Pro, iDive Reb, iDive Tech+, iX3M 2 Deep, iX3M 2 Easy, iX3M 2 GPS Deep, iX3M 2 GPS Easy, iX3M 2 GPS Gauge, iX3M 2 GPS Pro, iX3M 2 GPS Reb, iX3M 2 GPS Tech, iX3M 2 Gauge, iX3M 2 Pro, iX3M 2 Tech+, iX3M 2021 GPS Deep, iX3M 2021 GPS Easy, iX3M 2021 GPS Fancy, iX3M 2021 GPS Pro , iX3M 2021 GPS Reb, iX3M 2021 GPS Tech+, iX3M 2021 Pro Deep, iX3M 2021 Pro Easy, iX3M 2021 Pro Fancy, iX3M 2021 Pro Pro, iX3M 2021 Pro Reb, iX3M 2021 Pro Tech+, iX3M GPS Deep, iX3M GPS Easy, iX3M GPS Fancy, iX3M GPS Pro , iX3M GPS Reb, iX3M GPS Tech+, iX3M Pro Deep, iX3M Pro Easy, iX3M Pro Fancy, iX3M Pro Pro, iX3M Pro Reb, iX3M Pro Tech+
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
