The Cressi Drake is a mainly a freedive computer. The data format is
almost identical to the Leonardo. The main difference is that a single
dive now contains an entire freedive session. Each freedive in the
session is delimited with a 4 byte header containing the surface
interval and a special marker.
The logbook entries are stored separately from the profile data. If the
profile ringbuffer is filled faster than the logbook ringbuffer, then
the oldest logbook entries can still point to profile data that has
already been overwritten with newer data.
To detect such overwritten profile data, we keep track of the remaining
space in the profile ringbuffer.
The sample interval is stored in the settings, and thus there is no need
to use a hardcoded value. In practice all dives appear to be using the
default value (5 seconds), so this is more about being future proof.
On linux, several users are reporting download problems, while on
windows everything works fine. Simply toggling the DTR line appears to
fix the problem.
A possible explanation is that on windows, the SetCommState() function
not only configures the serial protocol parameters, but also initializes
the DTR and RTS lines. In the libdivecomputer implementation the default
state is enabled (DTR_CONTROL_ENABLE and RTS_CONTROL_ENABLE). The result
is that the DTR line gets automatically initialized to enabled, and then
manually disabled again.
On linux, the DTR and RTS lines are not automatically initialized during
configuration, and need to be controlled explicitely. The result is that
the DTR line ends up disabled without being toggled.
The read command appears to be limited to the range 0x1000-0x1100. That
range seems to correspond with the first 256 bytes of the full memory
dump. The packet size of 32 bytes is an arbitrary choice.
When building the Windows version resource, the -DHAVE_CONFIG_H option
isn't passed to resource compiler automatically. The result is that
development builds don't have their git revision embedded in the DLL.
The dive mode is stored in each sample, and can change during the dive.
In order to report a single value for the entire dive, we assume the
value of the first sample is representive for the entire dive. For
example a dive started as a CC dive but with a bailout to OC during the
dive, is still considered to be a CC dive.
A warning is generated if the dive mode changes.
For dives with multiple gas mixes, an application doesn't have enough
info to figure out which one is the initial gas mix. Usually it's the
first gas mix, but that's not guaranteed. Reporting the intial gas mix
on the first sample avoids this problem.
In the public header files, all symbols are marked extern C. When using
a C compiler, there is usually no problem if the header isn't included
in the C file. But the msvc build system uses the C++ compiler (due to
the use of some C99 features not supported by the msvc C compiler).
On Mac OS X, libusb doesn't work for USB HID devices. We can use the
hidapi library instead. Although the hidapi library supports Linux and
Windows too, we keep using libusb there to avoid the extra dependency.
In commit 864b46603963ea2f70f5166bb7a738a12fc280fc, the sample events
have been removed because we need to parse the enum string descriptor
instead of the numeric value.
The gasmix query interface considers cylinders and gas mixes independent
things, so the tank data structure has a pointer to the gasmix index.
But the EON Steel treats cylinders as just having a gasmix (and so does
subsurface, for that matter), so the gasmix index for the tank is just
the same as the tank index.
But we never filled it in, so you'd always see a "gas index" of zero,
and subsurface would end up warning each time about how the gasmix index
doesn't match the cylinder index (but because subsurface actually agreed
with EON Steel, it worked despite the warning).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hardcoding the enum values for setpoint type and gas type,
use "lookup_enum()" to actually parse the enum data and use that.
I don't think this matters right now, since the numeric translations
haven't changed, but it is the RigthThing(tm) to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a bug where the begin/end marker was mistakenly added as the
value instead of as flag.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive gas parsing cases can be split out into a helper function to
keep things more manageable. Especially since there will be a couple
more cases coming up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out you can't hardcode the enum numbers either, since they
change from dive to dive (or possibly firmware version to firmware
version).
So do it right, and actually parse the string descriptor for the enum.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The samples that take 'enum' types need the type descriptor to parse
what the enum type means.
This doesn't actually use the data yet, I need to add parsing of the
enum descriptor string.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous commit fixed the cache initialization testing, and
uncovered the fact that the tank size cache initialization didn't set
the initialized bit correctly. That oversight had been hidden by the
fact that we then tested the bit wrongly, so not setting it right didn't
use to matter as long as there were other higher cache bits that were
set.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The check for whether we had initialized a field in the EON Steel cache
data structure was wrong, causing some entries to be returned
successfully even if their field had never been initialized.
In most cases, it didn't matter, since the cache data was initialized to
zero (which is a fine default for uninitialized data), so most of the
time it didn't matter.
But for the recently added dive mode field, this caused OC dives to be
returned as freedives, for example.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does the basic divemode and setpoint parsing for the EON Steel, and
gets the CCR download right in the big picture.
The cylinder information is still confusing and incorrect, but this is a
big step in the right direction.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
