The initial gas mix index has been confirmed for the D6i only. For the
other two models, it's an educated guess that the byte offset will be
identical.
The Suunto dive computers record gas change events in the profile data.
But because there is no gas change event stored on the first sample, the
application doesn't know which gas mix is in use, until the very first
gas change event occurs.
For the Suunto HelO2, the index of the initial gas mix is stored in the
dive header. This is most likely also the case for the other models, but
I haven't found yet where exactly it is stored. As a temporary solution,
we simply assume the initial gas mix is the first gas in the list with
available gas mixes. This should be a reasonable assumption for most
dives.
Fixes ticket #2
The gas mix data is used from multiple functions, and the code to parse
that data is duplicated in each function. Because this is error prone,
the code is moved to a single place, and the data cached in the parser.
This event is on when accumulating deco time. Once you reach the floor
deco time will start decreasing and the event will stop. Going below the
floor again will re-activate the event.
Signed-off-by: Michael Andreen <harv@ruin.nu>
The Suunto DX has support for 8 gas mixes (OC) and 3 diluents (CC).
Because it's still unknown how rebreather dives are stored, we simply
return all 11 gas mixes. For the rest, the DX data format is very
similar to that of the existing Suunto models, with only a few
different offsets here and there.
When the number of parameters is zero, there are no sample values, and
the offset variable is never increased. The result is an infinite loop.
In practice this shouldn't happen because there should always be at
least one sample value (e.g. depth). But if a new data format is
available, which is not yet supported by the parser, we might be trying
to interpret the wrong byte.
Currently, each backend has it's own function to verify whether the
object vtable pointer is the expected one. All these functions can be
removed in favor of a single isintance function in the base class,
which takes the expected vtable pointer as a parameter.
Functions which are called through the vtable, don't need to verify the
vtable pointer, and those checks are removed.
The term "backend" can be confusing because it can refer to both the
virtual function table and the device/parser backends. The use of the
term "vtable" avoids this.
After the new firmware upgrade, up to three gas mixes are available
instead of only two. This causes the parsing to fail because there is
now an extra 6 byte gasmix block in the header.
Unfortunately, we can't rely on the firmware version to detect whether
this extra gasmix is present or not. In theory the dive computer can
contain dives in both the old and the new format. Because the firmware
version is a property of the device, and not stored inside each dive,
using the firmware version would either cause the old or the new dives
to fail parsing. This appears to be the approach DM4 is using.
According to some sources on the internet, the logbook gets erased
during the firmware update. However, according to the memory dumps I
received, that appears to be incorrect. The old dives are still
present, and it seems it's only DM4 that fails to download them.
So we need an alternative solution. After a detailed analysis of all
the Suunto dives at my disposal, I noticed something interesting. The
first 5 bytes of each dive are almost static. There are only 5
different variations:
0061906216
0061A06216
0062909118
0062C07118
0063C07118
The interpretation of these bytes is currently unknown, but the second
byte might be some kind of data format version. Each model always has
the same value here, and for the D6i it changes after the firmware
update:
0x61: D4, D6, D9, Cobra 2, Cobra3, Vyper 2, Vyper Air
0x62: D4i, D6i (old firmware), D9tx, HelO2
0x63: D6i (new firmware)
This can't be coincidence, so we use this byte to detect the presence
of the extra gasmix.
The HelO2, D4i, D6i and D9tx all use the same data format for the gas
mixes. The only difference is the number of gas mixes and the initial
byte offset. With this knowledge, we can easily use the same code for
all models. An additional advantage is that because the profile
configuration data is stored immediately after the gasmix section, we
can also replace the hardcoded offset with a simple calculation.
This macro was used to compensate for the fact that the 4 bytes at the
start of each dive, containing the previous and next dive pointers, are
stripped. With the SKIP macro the byte offset remained the same as in
the documentation. Nowadays, this compatibility isn't necessary anymore
and it only makes interpreting the raw binary data more difficult.
The second gas change event (type 0x06) contains both the oxygen and
helium percentages. These are now reported correctly with the new
GASCHANGE2 event.
The D9 family has begin and end of the deco event and we can therefore
convert this to the deco sample. For compatibility with existing software
we keep the events around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the gas model setting is set to air, the individual gas mix
definitions retain their previous (non-air) values. This is convenient
to avoid having to adjust the gas mixes again on your next nitrox or
mixed gas dive. But the consequence is that for air dives, the gas model
should take precedence over the individual gas mix definitions, and a
single mix with air is returned instead.
I forgot to update the device and parser initialization functions to
store the context pointer into the objects. As a result, the internal
context pointers were always NULL.
The public api is changed to require a context object for all
operations. Because other library objects store the context pointer
internally, only the constructor functions need an explicit context
object as a parameter.
Adding the "dc_" namespace prefix (which is of course an abbreviation
for libdivecomputer) should avoid conflicts with other libraries. For
the time being, only the high-level device and parser layers are
changed.
The public header files are moved to a new subdirectory, to separate
the definition of the public interface from the actual implementation.
Using an identical directory layout as the final installation has the
advantage that the example code can be build outside the project tree
without any modifications to the #include statements.
The sample configuration data describes which sample data is available
and how it is stored. Using this data should be more reliable than using
a hardcoded configuration.
