This method can be used by external applications to open a
device and to pass their custom implementation for the
serial communication.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a custom open method for HW OSTC3 family.
This method can be used to pass a reference to a dc_serial_t
structure. In this way the applications can implement their
own implementation for a serial communication and set their
callbacks for the basic serial functions.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Open a native serial device and use it in the HW OSTC3
implementation.
This patch replaces the old serial structure with the
new one, which can be used for custom serial implementations.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a structure which holds references to basic operations
on a serial communication. This can be used to pass a set
of function pointer callbacks in order to create a custom
implementation for serial communication.
Add a generic structure to represent the needed information
for a serial communication.
Implement the initialization method where the user can
pass a set of function pointer callbacks and set some
custom data for the serial device.
Create open method for the native serial implementation.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new transport type which can be used to identify
Bluetooth serial communication.
Signed-off-by Claudiu Oleanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The format string was incorrect, producing firmware numbers as 3.2
instead of 3.02 as is the current OSTC firmware version.
This was reported via hw's forum:
http://forum.heinrichsweikamp.com/read.php?2,14550,14552
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sending this in OC mode is redundant and might confuse applications that
assume they only get PPO2 data in CC mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way it will be obvious when people report their libdivecomputer
version that they are using our branch
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have the correct firmware in the devinfo, but that's the firmware the
dive computer is on NOW, not necessarily the firmware it was using when
recording the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has been verified with a few of the models, it needs much more
testing to make sure this is generally correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data isn't per dive, but it makes sense to return it here as a
string (we already return it as unsigned int in the devinfo event after
opening the device).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can be used to return almost arbitrary information to the dive log
application at dive parse time, by returning a number of strings (with a
descriptor) for dive state.
NOTE! The strings are supposed to be human-readable, so that the dive
log application can just show them unedited - and without understanding
them - to the user, together with the description. So if your dive
computer supports returning a battery voltage, for example, you can
return it as a
{ "Voltage", "4.449V" }
descriptor/value string pair, and the application could then put these
string pairs together and show (somewhere) an informational line like
"Voltage: 4.449V" along with the other information you return.
Some dive log applications migth recognize particular descriptor strings
and use them specially to fill in other information (ie serial numbers,
weight and suit information etc), but in general the interface is very
much meant to be informational free-form for a human user.
So do *not* use this interface to encode things that are not human-
readable. Serial numbers or version information that is meaningful to
humans are fine. But random encoded data structures are not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the PPO2 sample was introduced, we didn't take into account the
fact that rebreathers usually support multiple O2 sensors. The HW OSTC
supports for example three sensors. In order to support multiple values,
without having to introduce a new data structure with an additional
sensor id field, we simply relax the assumption of allowing only one
DC_SAMPLE_PPO2 value per sample. Applications that are not prepared for
multiple values, will automatically use only one of them (probably the
last one).
With firmware version 1.84 (beta), a more compact logbook header is
introduced. Due to their smaller size (16 vs 256 bytes), the total
amount of data that needs to be transferred is much smaller (4K vs 64K).
Therefore, downloading these compact headers is roughly 16 times faster
then downloading the full headers.
For backwards compatibility with older firmware versions, there is an
automatic fallback to the full logbook headers.
The Shearwaters store the current dive mode for each sample, and not one
single value for each dive. Therfore we need to process all samples. If
there is at least one sample marked as closed circuit, we classify the
dive as a closed circuit dive. Otherwise we default to open circuit.
For devices without a logbook ringbuffer, such as the Oceanic Veo 1.0
and the Aeris XR-1 NX, the ringbuffer begin and end are identical. In
this case, the changes in the previous commit will always result in a
fatal error due to an invalid ringbuffer pointer. To avoid the error, we
exit before trying to use the pointers.
Until now, an invalid logbook pointer was silently ignored and handled
as an empty ringbuffer. But this hides real errors, which is worse than
failing if no dives are present. Trying to download dives from an empty
device should be a rather uncommon scenario anyway.
Now that we are able to parse the event bytes properly, there is no need
to pass the raw event bytes to the application.
In the current implementation, the vendor event was broken for devices
with multiple event bytes anyway. Because we deliver all event bytes at
once, the application doesn't know which bytes contain a valid value
(originating from the profile data) or just a dummy zero value.
Right now only gas switch and bookmark events are supported, because
none of the other uwatec events can easily be mapped onto the existing
libdivecomputer events. But the basic infrastructure for supporting more
events is in place now.
For obvious reasons, the -static-libgcc linker option is not supported
by non gcc compilers, like clang. Since we only need this option when
building Windows DLL's, we can easily avoid the problem with a
conditional on the mingw compiler.
The Shearwater Petrel 2 uses exactly the same communication protocol as
the original Petrel. Therefore the new model has always been supported
out, and we only need to add the new model to the list of supported
devices.
The id of the uwatec deco mix is always 2, even for devices which
support maximum two gas mixes. Strictly speaking, this change is more
correct than commit 4fd825cdac341a2d4a1366c6deb7d4a71bbdf94d, allthough
in practice they are equivalent.
The bitmask for the gas mix bits was wrong. With the new mask we also no
longer have to disable the alarm based gas switches for the Meridian and
Chromis.
Originally I assumed it's not possible to enable a gas mix if the
previous gas mix has already been disabled. However, this assumption
turns out to be wrong. For devices with support for 3 gas mixes, it's
possible to enable only the first and the third gas mix, and leave the
second gas mix disabled.
This is fixed by checking all gas mixes, instead of aborting once the
first disabled gas mix has been found. Due to this change the uwatec gas
mix id's are no longer sequential and need to remapped to the
corresponding internal array index.
It looks like the SAMPLE_EVENT_AIRTIME is actually meant for just
airtime warnings (as in the dive computer warning about low air).
If we ever care, I think we'd need to add a new interface for this.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that I actually have dives with the new format and with air
integration, I could test it all out and noticed some missing pieces.
This adds parsing for gastime and ventilation events (although we don't
*do* anything with the ventilation data, I have no idea what the number
means).
Also, this fixes an annoying warning message problem, which caused these
missing events to cause a SIGSEGV rather than just a bening warning.
Stupid bug, and only went unnoticed because libdivecomputer isn't built
with format string warnings.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets rid of the fixed sample indexes and the hardcoded grouping
code, and replaces them with proper parsing of the type descriptions.
This should mean that the new Suunto firmware v1.1.15 is now fully
supported by libdivecomputer.
There are still parts of the event description that we should really
parse better, notably the 'enum' descriptions of what the different
enumerated types mean, because it looks like those will change too. But
that is not nearly as important as getting the basic infrastructure done
for the core sample types.
Almost accidentally, this also ends up now parsing the compass heading
event.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
