This extends the libdivecomputer notion of "dc_tankvolume_t" to not just
have the tank volume type (imperial or metric), but be a "dc_tankinfo_t"
that shows other information about the cylinder.
The imperial-vs-metric data remains the same two values:
1 - metric
2 - imperial
but instead of being an enumeration of volume types, it is extended to a
bitmap of tank information, and the other bits currently are
4 - CC diluent cylinder
8 - CC O2 cylinder
with possible future extensions (bailout gas, perhaps).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The default libdivecomputer fields are good for structured data that has
a well-defined format, like the cylinder information, or the temperature
data.
But it is entirely useless for miscellaneous divecomputer-specific
information, where there is no standard way of representing the data
across different kinds of dive computers.
Examples of this include simple things like deco calculation algorithm
(what kind of Buehlmann, gradient factor information or is it some
vendor-specific mode?) and even something as trivial as a serial number.
No, serial numbers aren't numbers. They are strings. Really.
But this also includes much more complex data that is really specific to
a particular dive computer or family: what the battery status is for the
dive computer or the wireless transmitters it is connected to (sometimes
it's a voltage, sometimes it's a percentage, sometimes it's just "good"
or "marginal").
It also includes random incidental information like firmware version
numbers (again, these are strings, not numbers, despite the name) or
dive mode and personal adjustment information.
So allow the dive computer to just give "extra information" in the form
of an array of { key, value } string pairs. For my Perdix AI the
information could be
{ "Serial", "370d1f24" }
{ "FW Version", "44" }
{ "Deco model", "GF 40/85" }
{ "Battery type", "3.6V Saft" }
{ "Battery at end", "3.4 V" }
and for my EON Steel with three wireless transmitters connected it can
look like this:
{ "Serial", "1742104730" }
{ "FW Version", "1.6.5" }
{ "HW Version", "70.3.0" }
{ "Battery at start", "Charge: 83%, Voltage: 4.012V" }
{ "Deco algorithm", "Suunto Fused RGBM" }
{ "Personal Adjustment", "P-2" }
{ "Battery at end", "Charge: 79%, Voltage: 3.977V" }
{ "Dive Mode", "Trimix" }
{ "Desaturation Time", "7:53" }
{ "Transmitter ID", "1519107801" }
{ "Transmitter Battery at start", "87 %" }
{ "Transmitter Battery at end", "87 %" }
{ "Transmitter ID", "1550110028" }
{ "Transmitter Battery at start", "100 %" }
{ "Transmitter Battery at end", "100 %" }
{ "Transmitter ID", "1719102387" }
{ "Transmitter Battery at start", "100 %" }
{ "Transmitter Battery at end", "100 %" }
so this data is inherently unstructured and dependent on the dive
computer, but quite relevant to the diver. Subsurface shows this in the
"Extra Info" panel for each dive computer.
Also teach the example output-xml code about the new string field
extension. That example output-xml code was written by Anton Lundin in
the old Subsurface branch, and signed-off-by Dirk. The sign-offs here
are taken from that original work.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We _really_ find the standard libdivecomputer event enumeration much too
inflexible and not giving us enough useful information. This is
particularly noticeable with the Suunto EON Steel/Core, where there are
no fixed event enumerations, but instead the dive computer literally
gives you event strings.
Do the same thing in the libdivecomputer interface: allow an event of
type SAMPLE_EVENT_STRING which instead of the useless "value" gives an
actual string describing the event.
Also, extend the "flags" field to have not just a NONE/BEGIN/END marker,
but a severity level. The severity level is 3 bits, so 0-7, with the meaning being
0 - 'no severity info'
1 - state change (so 'surface' event or similar - don't even show it by default)
2 - notification (informational, eg "safety stop", "tank change")
3 - warning ("ascent speed")
4 - alarm (some actual dive violation).
5-7: future expansion?
Think of 0 as "legacy - missing information", 1 as "internal DC thing",
and 2-4 as (green-yellow-red).
This makes it possible for the dive computer back-end to give the user
actual useful information for events.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new type to distinguish between closed circuit (CCR) and
semi-closed circuit (SCR) diving. Some dive computers from HW and
DiveSystem/Ratio support this.
Because the CCR/SCR abbreviations are more commonly used, let's take the
opportunity to also rename the existing DC_DIVEMODE_CC. To preserve
backwards compatibility, a macro is added to map the old name to the new
one.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
For applications supporting offline parsing (like libdivecomputer's own
dctool application), some device specific knowledge is still required in
order to map a particular model to the corresponding backend. The new
convenience function will take care of that internally.
The already existing dc_parser_new() function does the same, but
requires an open device handle, which makes it unsuitable for offline
parsing.
The new gasmix sample contains the index of the active gas mix.
This new sample is intended as a replacement for the existing gas change
events (SAMPLE_EVENT_GASCHANGE and SAMPLE_EVENT_GASCHANGE2). To maintain
backwards compatibility, the legacy events are marked as deprecated but
not removed yet.
There are two different ways to specify the volume of a tank. In the
metric system, the tank volume is specified as the water capacity, while
in the imperial system the tank volume is specified as the air capacity
at the surface (1 ATM) when the tank is filled at its working pressure.
To avoid mistakes, the tank volume is now always returned as the metric
volume. For imperial tanks, the tank volume is converted to the metric
representation.
Devices that only reports a single temperature in the header
will now be able to report it as well when they implement this.
Signed-off-by: Calle Gunnarsson <calle.gunnarsson@gmail.com>
This event is on when accumulating deco time. Once you reach the floor
deco time will start decreasing and the event will stop. Going below the
floor again will re-activate the event.
Signed-off-by: Michael Andreen <harv@ruin.nu>
The SAFETYSTOP is conceptually somewhere in between the NDL and the
DECOSTOP, so it makes sense to re-order the constants in the enum to
reflect this order.
Having these as events seems less useful since for many dive computers
there are data with every sample - so it makes much more sense to have
these as part of the sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far only OSTC and Shearwater Predator are supported. For the OSTC we
support CNS and setpoint changes in the samples (the current hardware
doesn't actually support ppO2 sensors and for the older hw that does I
don't have the correct encoding information).
For the Predator we support only the "average ppO2 during the sample".
The Predator also gives us a CNS value at the end of the dive - I don't
quite know yet how to deliver that back to the consumer. Possibly as CNS
value in the very last sample? That would at least be consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- PO2 warnings (high and low both mapped to the same SAMPLE_EVENT_PO2
event)
- SPEED warning (which according to hw isn't emitted at this point)
- Deco stop violations (both deep and regular mapped to same
SAMPLE_EVENT_CEILING event)
- Deco ceiling and time (this is reported as a series of
SAMPLE_EVENT_DECOSTOP events with packed deco stop depth (in m) and
time (in seconds)
A SAMPLE_EVENT_NDL event (with an optional value indicating the non-stop
time remaining) indicates that the ceiling has been resolved
- Gas change (reported as SAMPLE_EVENT_GASCHANGE2, using another
unfortunate O2% / He% semantic that is used in the
SAMPLE_EVENT_GASCHANGE
This also covers the manual gas set event of the OSTC
- Manual Marker (reported as SAMPLE_EVENT_BOOKMARK)
The two new events (SAMPLE_EVENT_GASCHANGE2 and SAMPLE_EVENT_NDL are added
to the universal app as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The devinfo and clock event data is now cached internally at the device layer.
This allows the new dc_parser_new() convenience function to retrieve the event
data directly from the device handle, and applications don't have to deal with
the events anymore to create a parser.
Adding the "dc_" namespace prefix (which is of course an abbreviation
for libdivecomputer) should avoid conflicts with other libraries. For
the time being, only the high-level device and parser layers are
changed.
The public header files are moved to a new subdirectory, to separate
the definition of the public interface from the actual implementation.
Using an identical directory layout as the final installation has the
advantage that the example code can be build outside the project tree
without any modifications to the #include statements.
