Merge upstream version 0.8.0 into our libdc fork.
Since we tracked the development branch, we already had merged all the
main changes, but it's been a couple of months since the last upstream
merge, and there were a few new changes upstream:
- Divesoft Freedom and Liberty support
- A couple of iostream abstraction layers: a new 'packet layer' and a
HDLC layer, moving code from low-level dive computer downloaders to
generic iostream layers.
- misc minor updates
* tag 'v0.8.0': (25 commits)
Release version 0.8.0
Fix the date of the v0.7.0 release
Add a missing filter for the Aqualung i750TC
Reduce the BLE output packet size to 20 bytes again
Integrate the new packet I/O in the backends
Add a generic packet I/O implementation
Fix a typo in the documentation
Add support for the Divesoft Freedom and Liberty
Integrate the HDLC stream in the eonsteel backend
Add a generic HDLC I/O implementation
Remove the local endianess functions
Use the correct function to free resources
Add the udev rules to the distribution tarball
Add a README file to the contrib directory
Include the revision in the Visual Studio and Android builds
Don't generate the Windows version resource
Move the Visual Studio project to the contrib directory
Add a basic Android build system
Disable the getopt argument permutation on Android
Move the sign extension function to a common place
...
The latest versions of the Divesoft Freedom (HW 4.x) and Liberty (HW
2.x) dive computers support BLE communication. Previous generations did
support only a mass storage mode, where the dives are available as DLF
files. The BLE communication protocol uses HDLC framing for the data
packets. The dives downloaded over BLE have the same data format as the
DLF files.
Co-authored-by: Jan Matoušek <jan.matousek@rekomando.cz>
Tested-by: Jakub Hečko <jakub.hecko@divesoft.com>
Merge upstream updates from Jef Driesen:
- Deepblu Cosmiq+ support has been merged upstream
- Oceans S1 support has been merged upstream
- Various new models supported: Cressi Donatello, Scubapro G2 TEK, new
Excursion v6+ firmware.
- misc core changes, most notably supporting a new annoying specialized
binary format for "decomode", because Jef still can't deal with
strings.
- lots of small details
* https://github.com/libdivecomputer/libdivecomputer: (58 commits)
Keep open-circuit and diluent gas mixes separately
Parse some extra gas mix information
Limit the index to the fixed gas mixes
Handle dives without a valid gas mix more explicit
Ignore all gas mixes for freedives
Always include all gas mixes defined in the header
Add support for the new Excursion v6+ firmware
Add support for the HP CCR tank pressure
Use the correct field for the setpoint sample
Add support for the Oceans S1
Add support for the Deepblu Cosmiq+
Add missing functions for accessing big/little endian values
Move the snprintf functions to the platform module
Repeat the handshake every few packets
Enable big page support
Remove the model number from the vtpro struct
Add the model number to the version table
Move all model numbers to the common header
Remove a duplicated include statement
Add support for the 300bar pressure sensor
...
The Oceans S1 uses a plaintext and line based communication protocol
over BLE. The larger payloads, which also contain plaintext data, are
transferred using the XMODEM-CRC protocol.
Based-on-code-by: Linus Torvalds <torvalds@linux-foundation.org>
The Deepblu Cosmiq+ uses a plaintext and line based communication
protocol over BLE, where the binary payload data is encoded as
hexadecimal characters.
Based-on-code-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge Jef's upstream updates:
- Add support for Seac Screen and Action
- Add support for Cressi Michelangelo
- misc small fixes
* https://github.com/libdivecomputer/libdivecomputer:
Add support for the Seac Screen and Action
Add an address parameter to the memory dump helper function
Ignore invalid gas mixes
Add support for the Cressi Michelangelo
Move the C_ARRAY_SIZE macro to a common place
Fix the timezone offset in the xml output
Emit a devinfo event when downloading a memory dump
Read the info and more info data during startup
Use helper functions to decode multibyte values
Fix changing the OSTC settings
Merge Jef's upstream into the Subsurface branch:
- support for new dive computers: Mares Pick Pro+, Deep Six Excursion,
Crest CR-4, Genesis Centauri and Tusa TC1.
- support freedive mode on Mares Smart Air
- work with Oceanic dive computers regardless of whether they need the
BLE handshake or not
- OSTC updates: support bigger BLE packets in newer versions, fix
setpoint in SCR mode
- Shearwater updates: full dive mode parsing, correct timezone handling
on Teric, support up to four transmitters on newer log versions.
* git://github.com/libdivecomputer/libdivecomputer: (26 commits)
Read the extra tank information
Add support for transmitter T3 and T4
Limit the number of records for the Predator
Report the timezone offset for the Teric
Use the correct model number from the final block
Use the dive mode stored in the header
Report the correct dive mode for SCR dives
Increase the size of the BLE packet cache
Add support for the Genesis Centauri and Tusa TC1
Read the hardware and software version
Report the initial setpoint in SCR mode
Add the divemode to the layout descriptor
Re-order the fields in the layout descriptor
Show the correct help message for the scan command
Add support for the Crest CR-4
Add udev rule for the Suunto EON Steel Black
Ignore unsupported BLE handshake
Detect NAK response packets
Remove the initial gas switch
Restore the original standard gravity factor
...
Update to the v0.7.0 release.
Only a couple of trivial changes from the last development version we merged with:
- add new product ID for the Sherwood Amphos 2.0
- make the example app use the product name and not vendor name for the
McLean Extrme
* tag 'v0.7.0':
Release version 0.7.0
Use the product name as the family name
Add support for the Sherwood Amphos 2.0
Merge upstream updates from Jef:
- add suppoort for various new variants of existing dive computers:
+ Suunto Eon Steel Black, and new variant of Zoop Novo
+ Sherwood Beacon
+ new Shearwater Perdix AI model number
- add new Sporasub SP2 support
- various minor fixes and updates
* 'master' of git://github.com/libdivecomputer/libdivecomputer: (22 commits)
Add support for a new Suunto Zoop Novo variant
Add support for the EON Steel Black
Add support for the Sporasub SP2
Fix an overflow in the progress events
Use a common sleep implementation
Fix the clang compiler flag detection
Add Github Actions CI builds and releases
Show a summary after configuration
Extend the OS detection to non Windows platforms
Implement the ndl/deco sample
Fix the maximum depth
Mark the McLean Extreme as supporting BLE
Fix -Wcast-qual compiler warning
Mark the new iX3M 2021 models as supporting BLE
Add support for the Sherwood Beacon
Remove the infinite timeout
Simplify the loop for reading the packet header
Add a new Perdix AI hardware type
Fix the McLean Extreme fingerprint feature
Perform the check for the NULL key earlier
...
The Sporasub SP2 uses a very simple communication protocol and memory
layout, but with some unusual aspects:
Dives are artifically limited to a maximum of 6000 samples.
Unlike all other dive computers, the dives are not stored in some kind
of ringbuffer structure. Once the memory is full, no new dives can be
recorded. The existing dives need to be erased first, and the dive
computer will start recording again at te start of the memory area. The
Sporasub application has an "Auto-clear watch memory after data
transfer" feature for this purpose.
I didn't implement a more efficient download algorithm because
downloading a full memory dumps takes less than 10 seconds.
Merge upstream changes by Jef Driesen:
- add support for Liquivision dive computers
- add support for the Aqualung i470TC
- extract out Atomic Aquatics Cobalt USB support as a iostream
- misc fixes
* git://github.com/libdivecomputer/libdivecomputer:
Fix the OSTC4 firmware upgrade
Handle a negative number of bytes as an error
Update the example application
Use the new USB transport for the Atomic Aquatics Cobalt
Add an I/O implementation for USB communication
Add support for filter parameters
Disable direct access to the filter function
Increase the receive timeout to 5 seconds
Fix the McLean Extreme bluetooth name
Add support for Liquivision dive computers
Add support for the Aqualung i470TC
Add initial support for the Oceans S1.
This expands a bit on the generic functions for the field-cache code,
and uses that to then add a fairly minimal Oceans S1 downloader.
And while it's minimal, it downloads about everything the S1 offers,
which is mainly just depth and temperature.
There are a few fields that it currently doesn't use, notably the
events and NDL information that the dive computer presumably reports in
the auxiliary data that comes in the sample, but without documentation
and more testing I'm not comfortable parsing that.
There's also some "current dive computer state" that isn't imported,
like the battery status. I know how to read it, but it's not per-dive
data that could be added as extra fields: it's literally just the
current dive computer battery state at the time of the download.
The Oceans team said they'll provide more information about the
download, so this might be expanded in the future, but it seems fairly
usable even in this form.
Thanks to Dhaval Giani for sending me his Oceans S1 as a loaner, and to
Seth Garrison for doing the initial BLE packet dumps that made me think
it was fairly easily doable.
* Oceans-S1:
Oceans S1: polish up the downloading logic for usability
Oceans S1: actually download all dives and parse them
Oceans S1: fill out core download protocol details
Oceans S1: start filling in protocol details
Oceans S1: start documenting the download format and first packets
Add skeleton for Oceans S1 downloader
Add generic dc_field_get() helper
Merge upstream libdivecomputer updates from Jef Driesen:
- Jef merged the EON Steel dive sorting fix we had in our branch: one
less difference to upstream
- Jef merged the McLean Extreme support with some updates and cleanups,
this just takes all his changes.
- manual pages for iostream
- various minor fixes and updates from Jef
* git://github.com/libdivecomputer/libdivecomputer:
Update the gitignore file
Update the man pages for the new iostream functions
Purge the serial port buffer during initialization
Add support for the McLean Extreme
Suunto Eon Steel: sort the dive list properly
Remove the salinity compensation
Fix the hwOS ppO2 bug for firmware v3.08
Initial support for McLean Extreme
Signed-off by: David McLean Carron <david_de_carron@hotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This uses pretty much all of our new infrastructure: the USB storage
iostream for the actual IO, the field-cache for the divecomputer fields,
and the string interface for the events.
It's also a very fast downloader.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This ends up being just a file interface for dive computers that expose
their data as a filesystem that can be mounted.
Right now that's only the Garmin Descent Mk1, although technically the
Uemis Zurich also did that (but oddly, and the backend was never merged
into libdivecomputer).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Uwatec Smart, Meridian and G2 backends are almost identical, except
for the low-level packet sending and receiving code. With the new I/O
layer, those three backends can easily be unified in a single backend.
The Meridian and G2 are completely removed, only the family types are
kept for backwards compatibility.
When two or more identical (or very similar) dive computers are
connected, the USB VID/PID can be ambiguous. That's because the VID/PID
identifies the type of the USB device, and not the individual device.
But each USB HID device descriptor returned by the device discovery
represents a single connected device, and thus guarantees to open the
correct USB device.
To obtain the same behaviour as before, an application can simply open
the first discovered device.
Setting a default transport type avoids the need to explicitely set a
transport using the the new --transport command-line option. This also
preserves backwards compatibility with previous versions where the
option didn't exist yet.
The dctool example application is updated to the latest changes:
- The I/O stream is opened and closed by the application.
- A new (mandatory) option is added to select the desired transport
type. This is nessecary because several dive computers support
multiple transport types now.
The back-end parser seems to be the same as for the Uwatec Smart (aka
Galileo Sol). At least that's the assumption right now.
The downloader just uses USB HID (very similar to EON Steel) rather than
the horrible IrDA thing.
There's also eventually a BLE thing, but that's for the future.
This is an unholy mixture of the Uwatec Smart downloader logic and the
EON Steel usbhid transfer code. The back-end is pure Uwatec Smart
(model 0x11, same as Galileo Sol).
I'm not at all sure this gets everything right, but it downloads
*something*.
[Jef Driesen: Renamed the backend to uwatec, and made some smaller
cosmetic changes to match the existing coding style.]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the device family is provided without an explicit model number, we
simply choose the first available model. But since new models are being
added all the time, this default model is not guaranteed to remain the
same. That's not desirable because it can alter the behaviour of the
application.
The introduction of the Aeris 500AI is an example of this problem. The
default model in the vtpro family used to be the Oceanic Versa Pro. But
because the Aeris 500AI has a lower model number, it automatically
became the new default model. Since both use a different protocol
variant (MOD vs INTR) they are not interchangable.
The default model is now hardcoded. The best option is of course to
provide the model number explicitly!
The universal application works well, but is quite difficult to extend
with more functionality. Therefore a new and more modular application is
needed. The new dctool application will support multiple sub-commands,
to carry out specific actions. Extending the application will be as easy
as adding new commands.
The public api is changed to require a context object for all
operations. Because other library objects store the context pointer
internally, only the constructor functions need an explicit context
object as a parameter.
